All About the Universal Installation Kit for Trailer Brake Controller Video

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

When we installed the Draw-Tite #76031 and Curt #C13309 trailer hitch receivers on a 2018 Nissan Pathfinder - which is the same body as a 2019 Pathfinder - we found that the Draw-Tite had both better ground clearance and better bumper clearance. The…

The wires to install the Prodigy P3 #90195 are indeed already run and under your dash. I have added a link to an installation video showing exactly how to install this brake controller in a 2011 GMC Sierra like yours. On the Prodigy the blue wire is…

A trailer that has a 7-way type wiring setup probably has electric drum brakes. To tow such a trailer with your Wrangler you will need a brake controller like the reliable Prodigy P2 #90885 along with the 7-way wiring setup. You'll first need to…

You are on the right track. Since your vehicle had a factory 4-way and you installed a 7-way the brake output circuit has been partially ran on your vehicle. It stops at the connector that is located under the driver's side wheel well. In order…

For a trailer hitch for your 2021 Jeep Cherokee, I recommend the etrailer Trailer Hitch Receiver - Custom Fit #e73ZR. The etrailer hitch is a great economical choice; it also provides you with 675 pounds of maximum tongue weight and 4,500 pounds of…

It sounds like you are trying to add a 7-way trailer connector to a 2021 Volkswagen Atlas and if that's the case we have some great options. That said, you'll have to start with a 4-way, the T-One Vehicle Wiring Harness part #118754 is…

Brake controllers are not vehicle specific and can be installed in most any vehicle with proper wiring. If you would like to resubmit your question with a little further information I would be glad to provide instructions or any information that you…

When you are hardwiring a trailer brake controller like the Prodigy P2 #90885 the red wire connection that provides the triggering signal to the controller should be made to the wire on the COLD SIDE of the brake light switch circuit. This is the…

The Hopkins Plug-In Simple Vehicle Wiring Harness #31345 that you installed is a confirmed fit for your 2017 Chevy Express Van so we can rule the harness out as the problem. It sounds like you extended the wiring from the 4-Way harness to a 7-Way…

The only weight information I could find on your 1999 Carriage Cameo M26-FLS is 5,620lbs which is the weight of the travel trailer when it left the factory. You will want to have the tongue weight verified by either using the Scale #e99044 or finding…

For your 6-way connection on your tow vehicle and your motorhome, you will want to make sure they match the attached photo. The vehicle side is labeled in the photo as is the trailer side. I gave you views from either side of each adapter. This will…