Checking Out the Replacement Handle for Yakima Rack and Roll Trailer Video

Hi Elliot, I'm really sorry to hear that you had an incident with your trailer! We do have a replacement Yakima Trailer Coupler for Yakima Rack and Roll Trailers part #Y08123 that'll replace your original trailer's coupler. The original…

I took a look at what we have for your Yakima Rack And Roll Trailer #Y08106 & #Y08107, and I was able to find the: -Replacement Lock Core and Keys for Yakima Rack and Roll Trailer #8880551 for key S305, and the, -Replacement Lock Core and Keys…

You could check Youtube or Yakima's website but we do not have a video showing the installation of the Replacement License Plate Kit for Yakima Rack and Roll Trailer item #8880166. What I can do is link the installation instructions below for the…

The Replacement Tongue Wiring Harness #Y8880203 is just the section of the wiring that runs down the main channel of the frame. If you had the tongue extension as well you'd want the part #8880161 as well. The rear harness is the part #8880162.

The Thinline LED Light #MCL65CRB will allow you to replace the Incandescent Light #M154C which comes with the License Plate Kit #8880166 for the Yakima Rack and Roll trailer. The light housing is sealed to keep water out so it must be replaced as a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…