View Cart

UWS Truck Toolbox - Crossover Toolbox - UWS00368 Review

content loading

Customers compare UWS00368 to these similar products

Products Featured in this Video

Review of UWS Toolbox UWS00368

Today we're going to review the UWS's Truck Bed Toolbox, part number UWS00368. This box is built here in the USA, and it's made of .063 inch aluminum tread plate. It's covered by a one year warranty and it has 6.9 cubic feet of usable space. Next we're going to show you some measurements. To do that, we need to open the lid first as boxes are measured without the lid. We'll grab this latch here and we'll be able to open the box just by pulling this latch.

There is a connecting rod that connects this latch to the other latch, so operating one latch opens both. The box measures 63 inches long, it measures 19 1/4 inches wide, and it's about 13 1/2 inches deep. Inside the box you will notice a few features. The lid is reinforced and strengthened so you can grab one corner of the box and the lid will stay stiff and allow you to close the whole box just from one corner. There's a piano hinge that runs the full length of the lid.

There's a pair of gas struts that will help open the lid and hold it open while you load and unload the box. Inside the box are two storage compartments on either end and there's also a sliding tray. Above the storage area of the box is a sliding tray that'll help you keep your small items organized and handy and you can slide the tray almost the entire length of the box so you can easily access what's underneath. There is a lock built into one of the latches so that you can secure the box and protect the contents. That does it for our review of the UWS Truck Bed Tool Box, part number UWS00368..

Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Patrick B
Video Edited:
Jacob T
Installed by:
Colin H
Video by:
Jacob H

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.