To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
63" Long x 19-1/4" wide x 13-1/2" deep; 7.3 cubic feet; 2" height above bed rails; standard box with foam filled lid and paddle lift handles; low-profile top; aluminum construction
Features:
Specs:
You will enjoy how much the sleek look of UWS's Low Profile Series complements the latest designs of today's trucks. The toolbox sits just 2" above the truck bed rails instead of the standard 4," providing a better view out the back window for maneuvering or keeping an eye on your load. The insulated, beveled, single lid opens fully to 90 degrees with the help of two super-duty lift cylinders, which raise the lid and hold it open as you load and unload your gear. Smaller items and tools can be stored conveniently on the divided, sliding tray, ensuring they are readily available for use.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review the UWS's Truck Bed Toolbox, part number UWS00368. This box is built here in the USA, and it's made of .063 inch aluminum tread plate. It's covered by a one year warranty and it has 6.9 cubic feet of usable space. Next we're going to show you some measurements. To do that, we need to open the lid first as boxes are measured without the lid. We'll grab this latch here and we'll be able to open the box just by pulling this latch.
There is a connecting rod that connects this latch to the other latch, so operating one latch opens both. The box measures 63 inches long, it measures 19 1/4 inches wide, and it's about 13 1/2 inches deep. Inside the box you will notice a few features. The lid is reinforced and strengthened so you can grab one corner of the box and the lid will stay stiff and allow you to close the whole box just from one corner. There's a piano hinge that runs the full length of the lid.
There's a pair of gas struts that will help open the lid and hold it open while you load and unload the box. Inside the box are two storage compartments on either end and there's also a sliding tray. Above the storage area of the box is a sliding tray that'll help you keep your small items organized and handy and you can slide the tray almost the entire length of the box so you can easily access what's underneath. There is a lock built into one of the latches so that you can secure the box and protect the contents. That does it for our review of the UWS Truck Bed Tool Box, part number UWS00368..
It was delivered just like you said it was on time, it was packaged very well and the product came in great condition perfect.
Use it daily, no problems at all.
Awesome package, looks great, fits perfect. Delivery time excellent
Top of the line service and product. Very happy with entire transaction. One year later box still looks and performs like new. Thanks
I was so happy to get this for my son. The only one i could find that would fit his ranger at the time. he uses it every day and it works great after one year. packaging , no scratches, and installed so easy that i went and bought me one. would recommend. sorry not much for technology or i would have added photos.
Everything fit as advertised . This is a good heavy duty well built product.
Toolbox came as advertised. Perfect fit in truck bed. Sturdy and well built. Easy to install. Exactly what I was expecting
Box fit great. Installed in minutes with no drilling holes in truck.The black finish matched truck perfectly.I like the lid that raises automatic but stops before hitting the cab of the truck.
Been happy with my purchase. I gave it 4/5 stars because it arrived with a dent on the lid that I was able to remove with a rubber mallet and a 2x4. The metal inside reflects poor workmanship. There are some sharp edges near the latch mechanism that I discovered firsthand after reaching in there. Aside from those issues it has functioned well and I find the dual lid release latches are convenient.
great box much better than one from tractor supply and other places very solid construction you can feel the difference i like it
My UWS Crossover tool box fit great. Only minutes to install. Looks great and needed on my 05 Ford Ranger single cab.
When I purchased the toolbox I forgot to mention that I have a bed liner in my vehicle. Therefore I had to put a 3/4 inch spacer on the top bed rails so the bottom of the toolbox would clear the bed liner over the wheel wells and fuel tank spout. Other then that I really have enjoyed the toolbox and have gotten many compliments as well.
It’s a tool box well made
I've had this tool box for about a year. Its held up well without issue. This replaced a 9 year old tool box from Lowes that cracked at the bed support. So far so good on this one. The locking and opening mechanism works great and is covered so things dont bind it up. The only strange thing is that after a windy snow storm there was snow inside the tool box and I hadn't driven anywhere.
After 2 weeks I finally got my toolbox this is good for a 2001 Ford ranger stepside it doesn't say it would fit but I measured it before I bought it had one little ding in the corner but I touched it up with spray paint overall it's an excellent toolbox and it fit perfectly this is originally for a Chevy S10 but I measured it and it fits good I would recommend this to anyone who owns a Ford ranger stepside! Check out the pictures you can see how well it fits! It is hard to find a toolbox that fits a Ford ranger stepside I used to work in the Marine Corps parts department in the motor pool so I know how to measure parts at first they said this wouldn't fit my truck but I told them I measured it!
This toolbox is a true work of art! Excellent craftsmanship in the welds. The latches work well and the top opens up nicely. I received the toolbox fast. It was well packaged for protection against shipping damage. It even came shipped in 2 boxes. The care this company took in protecting the toolbox during shipment assures me that they care about their product.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.