Review of Swagman Replacement Shank - SP329 Video

Hey Cesar, while they are both 2 inch by 2 inch square tubing we have no way of knowing how well the part #SP329 could work with a Thule T2 bike rack or how it would potentially install so we can't guarantee it would work. Only solution we can…

I went out to the warehouse and measured the Replacement 2 Inch Shank for Swagman XC Series 2 Bike Carriers, #P249. The overall length is 19 inches. The center to center distance between the pin holes is 16 inches. I have included a picture showing…

The Yakima Quater ROC doesn't have a replaceable shank to size up to a 2" receiver hitch, but you can use a reducer, like #e58YR or #HT02, to get your 2" hitch down to 1-1/4" to haul your bike rack. I do want to note that using…

I checked with Lippert, manufacturer of the Jack-It #LC429756 and they do not list an alternate shank. The only thing I can think of is that people are modifying it to fit their needs. You could instead use the Bike Bunk, #CC-275, with the Swagman…

The hitch lock, part #S64029 that you came from for your Swagman Bike carrier should be pretty easy to remove. I have attached a photo of the lock and as the arrow indicates the hitch bolt has a threaded end. After you remove the lock end of the pin…

I do have an option for you but bike rack manufacturers don't publish their hitch pin thread specs to discourage from using a different hitch pin from another manufacturer so this I cannot provide. That said, I can confirm the Locking…

I had our warehouse measure the thread pitch of the Swagman Anti-Rattle Hitch Lock #S64027 you were looking at and it has a 5/8" x 11 thread pitch. We do have the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers #e99047 which has…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…