Review of the Replacement End Link for Roadmaster Rear Anti-Sway Bars Video

In order to replace just the factory anti-sway bar bushings on a Ford F-53 Chassis you have a few options which will be based on the location of the anti-sway bar (front/rear) and the gross vehicle weight rating of the coach (15,700 lbs, 16,000 lbs…

We do have the Roadmaster B451 replacement end link, which is the following part number: - Roadmaster Sway Bar End Link #RM22VR

Hey Peter, did they have any more insight on what the issue was? We've installed this sway bar several times without having to modify the frame but I am curious what they mean though. In meantime I attached a link to install video for this sway…

We have the Front #RM-1139-176 and Rear #RM-1139-147 sway bars to fit the 2024 Ford E-450 chassis under your RV. These are much stronger than any that were installed from the factory and will greatly reduce body roll and sway. I do recommend…

The Roadmaster Rear Anti-Sway Bar #RM-1139-147 uses part #RM32VR (B315) for the end links, which are 11" in length. If you need longer end links Roadmaster can get you the correct size for your motorhome since you have a lift.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…