Lippert Electric Tread Lite Step for RVs Review Video

Hello again Robert; you can definitely add those steps to your 2023 Forest River Sunseeker 3250. To find the correct steps you need to measure. Assuming the entry height is 19-1/2"-22-1/2" then the 2 step version is correct. The Tread Lite…

What it sounds like happened is the brake solenoid on your steps stopped working correctly. There is a manual lever on the motor that can get flipped off which will then allow your steps #LC353542 to not stay extended. I have attached a photo of the…

It sounds like the brake solenoid on your Lippert Electric Tread Lite Step part #LC353542 is not functioning properly. There is a manual lever on the motor that can sometimes get flipped off which will then not allow the steps to stay extended. In…

I spoke with Lippert and the 158367 didn't come back to anything but 168367 did come up with a 29" Coach Step model. With Coach Step being phased out and replaced with the Kwikee line you'll need the Replacement Steps, Motor, and Control…

The problem is you do have the wrong switch for your door sensor. Whenever we hear that the steps are working in reverse that usually means you have the incorrect door switch, normally closed vs normally open or it is installed wrong. For a normally…

Bruce, this is fairly common, and the issue is usually with motorhomes that are wired to work with a normally open circuit and the steps being meant for a closed circuit. To fix the issue, you'll just need to use the Replacement Door Switch for…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…