bing tracking image

Brophy Clevis Hitch - Clevis Mount - CM91 Review

content loading

Customers compare CM91 to these similar products




Products Featured in this Video



Review of Brophy Ball Mounts CM91


Today we're gong to be taking a look at the Brophy clevis mount for inch and a quarter trailer hitches. This hick mount and clevis is great for industrial and agriculture applications. It's going to use a three quarter inch diameter pin, that pin is sold separately. You can find them here at etrailer.com if you're in need of one. The platform with the hole, that can also be used as a ball mount platform for standard towing. The unit's made from a steel construction, see back here on the shank, that's a solid steel, we don't have any hollow points except for the cutout right here for the hitch pin and clip or the hitch pin and lock. Nice steel construction, it's going to have a black powder coat finish on it so it's going to be highly resistant from rust and corrosion, it's going to last a long time.

Now to get it secured in your hitch, you've got to slide this into your hitch, line up your pin holes and then secure it with a hitch pin and clip or a hitch lock. This is going to accept a standard half inch diameter pin. Those items are sold separately so if you're interested in a hitch pin and clip or a hitch pin and lock you can check out some options here at etrailer.com. The product is made in the USA, again it is designed for an inch and a quarter by inch and a quarter class two trailer hitch receiver. It's going to offer a maximum gross trailer weight of 3,500 pounds and a maximum towing weight capacity of 350 pounds. Again the diameter of this hole right here, this is going to be for the clevis pin or the shank of the ball that you'd want to install on here.

Diameter, that's going to be right at three quarters of an inch. The draw bar thickness just measuring the thickness of each piece right here, these are going to be identical so I'm just going to take a measurement of one, that's going to give us a thickness of a half inch. The distance between the bars, so just measuring the opening, that's going to measure an inch and a quarter. Take a look at the overall length, end to end, that's going to give us a measurement of nine inches. The last measurement I want to give you is from the center of the hitch pin hole to the center of the actual ball hole or pin hole on this clevis mount. Line that up on center, that looks to be pretty close to six and three eighths of an inch.

That's going to do it for today's look at Brophy's clevis mount for inch and a quarter trailer hitches.


Questions and Comments about this Video

Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.