Customers compare BW1900-2-2007 to these similar products
Products Featured in this Video
Hi everybody, Andy here with etrailer.com. Let's take a real quick look at this B&W replacement latch pin handle. This is going to replace the latch pin handle assembly for your B&W turnover ball under bed gooseneck trailer hitch. On your screen, I am including the model numbers of those gooseneck trailer hitches that this is going to work with. And you are going to receive this one… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
We do have the replacement latch pin handle available for your B&W turnover ball. You will want to use the Replacement Latch Pin Handle for B&W Turnoverball Underbed Gooseneck Hitch #BW1900-2-2007. We also have an extended version. - Extended…
view full answer...I checked with B&W and with the Companion hitch #BWRVK3500-5W you would either need to remove the bedliner or trim it in the footprint of the entire base so it will have direct contact with the bed. The reason for this is because a slide-in…
view full answer...I called Andersen to confirm. If you are wanting more clearance for your Andersen Ultimate 5th wheel hitch, then using an offset ball like the Curt 4" Offset Ball for Double-Lock Gooseneck Hitch, part #C602, is exactly what you need. This should…
view full answer...The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000lbs Item #AM3200 will sit on the rails so it shouldn't be in contact with the bed liner. The only issue you might have is if the bed liner is raised too much and…
view full answer...The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.
view full answer...The airbags that I recommend for your 2018 Ford F-250 are the Air Lift LoadLifter 5000 Air Helper Springs part #AL57399. These airbags will not interfere with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1116 as you can see…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…
view full answer...Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…
view full answer...Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…
view full answer...