Vehicle Style: Hatchback, 5-Door Change
Trunk Bike Racks Specs:
Features:
...on different levels to help prevent bike-to-bike contact Ratcheting anti-sway straps secure your bikes' top tubes and seat tubes to the rack 6 Cam-buckle straps with rubber clips anchor the rack to y...
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack lets you carry up to 3 bikes on the back of your vehicle SuperCush anti-sway cradles with ratcheting ZipStrip straps hold bike frames at 3 points Prevent sway
Installation Notes:
Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack carries 3 bikes on the back of your sedan, hatchback, or SUV Expanded, arched base with dog leg fits over most large spoilers Anti-sway cradles with ratcheting straps...
Installation Notes:
The flat part of the foot must sit against the vertical surface of the trunk and the toe rests within one inch of the bumper
Do not open trunk while rack is installed
Do not use rear wiper when rack is installed
Upper strap should be placed over the leg
Tech Tip:
2 bike/ 70 lb load limit. Bikes must be located in positions closest to the vehicle. Part SA3035 is required to replace side hooks.
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack lets you carry up to 2 bicycles on the back of your vehicle Arched body fits over many types of spoilers HideAway anti-sway cradles with ratcheting straps hold bikes at 3...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack lets you carry up to 3 bicycles on the back of your vehicle Arched body fits over many types of spoilers HideAway anti-sway cradles with ratcheting straps hold bikes at 3...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack lets you carry up to 2 bikes on the back of your vehicle StableCradle anti-sway cradles with ChainStraps hold bike frame at 3 points Prevent sway and bike-to-bike contact...
Installation Notes:
More Information >Trunk Bike Racks Specs:
Features:
...span>anti-sway cradles Prevent bike-to-bike and bike-to-vehicle contact with No-Sway Cage accessories Include rubber straps to secure bikes in place Dual support arms Provide stability for bikes Fold down when...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...Trunk-mounted rack lets you carry up to 3 bikes on the back of your vehicle StableCradle anti-sway cradles with ChainStraps hold bike frame at 3 points Prevent sway and bike-to-bike contact...
Installation Notes:
More Information >Videos
for Trunk Bike Racks
Help Articles
for Trunk Bike Racks
Expert Answers
for Trunk Bike Racks
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity…
view full answer...I&…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what…
view full answer...Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed #MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization.…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...The Dexter 072-078-00 is a 2,200 lb capacity leaf spring. You can use a higher capacity leaf spring, however it…
view full answer...I checked your order notes and the leaf springs you bought last year were the part #e28SR which are for 5k axles. Since this is over the capacity of your axle failure would not have been caused by over loading the trailer assuming you stayed under…
view full answer...The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...We only carry one trunk mounted bike rack that will fit your 2018 Honda Civic Hatchback. Take a look at the Saris Bones EX 2-bike Rack #SAR83FR. This 2-bike trunk rack has an arched dog leg that fits over the spoiler on most sedans, hatchbacks, and…
view full answer...