Trunk Bike Racks Specs:
Features:
This trunk rack is perfect for carrying 2 bikes on your sedan, station wagon, or SUV. It attaches easily with 2 rubber-coated straps that let you raise your trunk or hatch without removing it from your vehicle.
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Set lower clips into bottom edge of internal metal bumper.
Always check to make sure there is no contact between the lower straps and the muffler and/or exhaust pipe.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
This trunk rack is perfect for carrying 2 bikes on your sedan, station wagon, or SUV. It attaches easily with 2 rubber-coated straps that let you raise your trunk or hatch without removing it from your vehicle.
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Place lower clips in the bottom edge of trunk or hatch.
Set lower clip/hook onto edge of structural bumper located behind plastic bumper.
Thule cannot recommend the use of 3-bike carriers on this vehicle.
Lower arm of carrier will rest at bottom of trunk lip.
More Information >Trunk Bike Racks Specs:
Features:
...16" Carrier weight: 13 lbs Limited lifetime warranty Note: This dual-arm rack reduces the need for a bike frame adapter bar (sold separately) to mount a children's, women's, or alternative f...
Installation Notes:
Use the tow loops in the center of the vehicle to attach straps or hooks.
Do not use Express racks if your vehicle is equipped with a spoiler
Vehicle has a soft bumper. The weight of bicycles may exceed the capacity of your bumper.
Use the holes located in the vehicle frame for attaching hooks.
More Information >Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 3 bikes on your vehicle's trunk Fits over most types of spoilers 2 Arms with padded cradles and rubber straps secure bikes by the frame 2 Quick-rel...
More Information >Trunk Bike Racks Specs:
Features:
...Hanging bike rack lets you carry 2 bikes on your vehicle's trunk Fits over most types of spoilers 2 Arms with padded cradles and rubber straps secure bikes by the frame 2 Quick-rel...
More Information >Trunk Bike Racks Specs:
Features:
...separately) to mount a children's, women's, or alternative frame bicycle. However, to mount certain bikes or to keep your bike level on the rack, a bike adapter bar may be required. Most step-...
Installation Notes:
Do not open trunk while rack is installed
Tech Tip:
Part SA3035 is required to replace top hooks.
More Information >Trunk Bike Racks Specs:
Features:
...separately) to mount a children's, women's, or alternative frame bicycle. However, to mount certain bikes or to keep your bike level on the rack, a bike adapter bar may be required. Most step-...
Installation Notes:
Do not open trunk while rack is installed
More Information >Trunk Bike Racks Specs:
Features:
...separately) to mount a children's, women's, or alternative frame bicycle. However, to mount certain bikes or to keep your bike level on the rack, a bike adapter bar may be required. Most step-...
Installation Notes:
Do not open trunk while rack is installed
More Information >Trunk Bike Racks Specs:
Features:
...separately) to mount a children's, women's, or alternative frame bicycle. However, to mount certain bikes or to keep your bike level on the rack, a bike adapter bar may be required. Most step-...
Installation Notes:
Do not open trunk while rack is installed
Tech Tip:
Part SA3035 is required to replace top hooks.
More Information >Trunk Bike Racks Specs:
Features:
...by the frame Adjust independently to keep bikes level during transport 2 Straps with rubber-coated hooks let you quickly secure rack to your vehicle Torque limiting knobs provide audible click when straps...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Set lower clips into bottom edge of internal metal bumper.
Always check to make sure there is no contact between the lower straps and the muffler and/or exhaust pipe.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Trunk Bike Racks Specs:
Features:
...times Padded clamps and wheel straps hold bikes securely by the frames and wheels 2 Straps with rubber-coated hooks let you quickly secure rack to your vehicle Torque limiting knobs provide audible click...
Installation Notes:
Place top clips in the gap at the front edge of the top of the trunk, hatch or door
Set lower clips into bottom edge of internal metal bumper.
Always check to make sure there is no contact between the lower straps and the muffler and/or exhaust pipe.
Lower arm of carrier should be positioned on upper tier of bumper.
More Information >Videos
for Trunk Bike Racks
Help Articles
for Trunk Bike Racks
Expert Answers
for Trunk Bike Racks
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity…
view full answer...The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...I&…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed #MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization.…
view full answer...It really just depends on what the wires are for. Most likely you have several ground wires among the 8 as well as a couple running light circuits in there as well. You just have to run all of the wires to the correct circuits. The 4-way wiring of…
view full answer...A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…
view full answer...The Montague Paratrooper Highline part #HIGHLINE20 is a 20 speed bike with 27.5 inch wheels whereas the Montague Paratrooper Pro part #PROBLK16 is a 27 speed bike with 26 inch wheels and has a rack over the rear wheel. So they are pretty similar…
view full answer...I checked your order notes and the leaf springs you bought last year were the part #e28SR which are for 5k axles. Since this is over the capacity of your axle failure would not have been caused by over loading the trailer assuming you stayed under…
view full answer...Filter Products (22)
Contact and Help
What our customers are saying:
The people answering the phones were professional & knowledgeable. All this and the best prices on the internet, How can you go wrong?
Bill
Vero Beach, FL