Base Plates Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
This bracket fits Moper/Warn bumpers having part number 82211715, 82211715AB, 8221175AC or 82209740AD and skid plate part numbers 82210401 or 82210401AB
More Information >Base Plates Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Drilling required for installation
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
Does not work with optional Mopar skid plate
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product fits bumper mounts with a 7/8 inch pin diameter, and includes spacers to fit mounts from 5/8 inch to 7/8 inch thick.
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product fits bumper mounts with a 1 inch pin diameter, and includes spacers to fit mounts from 5/8 inch to 7/8 inch thick.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Requires temporary removal of bumper/fascia during installation
Requires some trimming of the belly pan
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper/fascia during installation
Drilling required for installation
Requires some trimming of the belly pan
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product will also fit bumpers with a 1 inch thick mount that need extended reach, such as the Smittybilt Gen2 bumpers.
More Information >Base Plates Specs:
Base Plate Features:
Base Plates Specs:
Base Plate Features:
Installation Notes:
Drilling required for installation
Requires temporary removal of bumper/fascia during installation
Trimming or removal of underbody panel required for installation
More Information >Base Plates Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Drilling required for installation
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
Does not work with optional Mopar skid plate
More Information >Base Plates Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Drawbars are not removable.
Tech Tip:
Product fits vehicles with Rugged Ridge bumpers having part numbers 11540-10 or 11540-11; requires removal of the D-rings on front bumper.
More Information >Base Plates Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model.
This bracket fits Moper/Warn bumpers having part number 82211715, 82211715AB, 8221175AC or 82209740AD and skid plate part numbers 82210401 or 82210401AB
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper/fascia during installation
Requires some trimming of the belly pan
More Information >Videos
for Base Plates
Help Articles
for Base Plates
Expert Answers
for Base Plates
I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer…
view full answer...The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA…
view full answer...When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
view full answer...Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…
view full answer...The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...Filter Products (26)
Contact and Help
What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN