1989 Jeep Comanche Tool Box

Hey John congrats on the new truck! To add a set of air bags to your 2025 Ram 3500, I recommend the Air Lift LoadLifter 7500 XL Air Helper Springs item #AL57531. These fit both the 2WD and 4WD models and have a 7,500 lbs load leveling capacity. All…

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Tom welcome! Both the Thule TracRac SR Sliding Truck Bed Ladder Rack item #TH94RE for a 6-3/4' bed or item #TH43002XT-780 for the 8' and the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever #item #TH44RE for 6-3/4' or item…

The overall height including the cap for the DeeZee Truck Bed Auxiliary Tank #DZ91752X that you referenced is 22-1/2 inches. We've found that it typically fits pretty easily under tonneau covers like what you see in the attached picture, but you…

Not that one Scott, but I have one that will. The UWS Truck Bed Fender Well Toolbox item #UWS01624 is too tall at 23-1/4". To keep below your bedsides you'll need to use the DeeZee Specialty Series Passenger's-Side Wheel Well Tool Box…

Hey Steve, The B&W Patriot #BWRVK3255 you have would require base rails or a gooseneck hitch and an adapter in order to mount to the bed of the F-250. If you want to go with base rails then I recommend the B&W Custom Installation Kit w/ Base…

I do recommend using two pairs of the Ultra-Fab Chock and Lock Wheel Stabilizers #UF21-001070 for your triple axle trailer. Doing so is going to give you the best amount of stability to limit the front-to-back rocking motion that will occur when you…

Hey Fred, we don't have any tonneau covers that will fold forward like you are wanting but we do have a cover that is designed to fit behind a tool box with the Access part #A61409 that is confirmed to fit your 2024 Ford F-250 long bed. Would…

I recommend the UWS Truck Bed Toolbox w/ Pull Handles #UWS07646 to go with your Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A61409. It is low profile, 14-1/2" tall to allow you some extra space for hauling material, and is 20" wide…