2017 Ford F-150 6-1/2 Foot Bed Tonneau Cover

Features:

Tri-fold cover secures to side rails at 10 points for maximum security for your truck bed and cargo. Heavy-duty, lightweight aluminum panels feature a black urethane finish that absorbs impacts and resists scratching. Easy to remove.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.

Features:

Retractable tonneau cover with T-track rails lets you add a truck bed rack for carrying additional gear. It has a 450 lb load capacity so you can use it to hold equipment or even stand on it. Impenetrable aluminum slats keep cargo safe.

Features:

Avoid the hassle of traditional, snap-style tonneau covers, improve gas mileage and upgrade the look of your truck with a TruXport. The cover attaches on top of your truck bed side rails with clamps and rolls up to store conveniently behind the cab.

Features:

The Revolver X2 tonneau combines hard cover strength and security with soft cover convenience. The heavy-duty aluminum and vinyl cover sits flush on your vehicle and rolls up for full truck bed access. Easy, no-drill installation.

Features:

Increase your gas mileage and improve the look of your truck in minutes with a TruXedo Lo Pro tonneau cover. Top quality cover installs quickly, features an automatic tension control and rolls up in seconds to store conveniently behind the cab.

Features:

Solid Fold 2.0 tonneau features a durable tri-fold cover with a rail-free design, works with your existing 18" - 20" standard toolbox, and has an easy-to-use clamping system for installation and removal. Watertight seal against toolbox.

Features:

TonnoSport is the most affordable Access roll-up tonneau, and it has tons of great features: EZ-Dials for cover tension adjustment, a trigger latch to secure the cover, and a quick clip storage strap to tie it down. Sits 1/2" above the bed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Get style and versatility with this heavy-duty, all-aluminum tonneau. Quad-fold cover sits inside your vehicle's bed rails and secures upright for unrestricted bed access. Tailgate opens and closes with cover up or down. Matte black finish.

Features:

The Trifecta 2.0 tonneau combines the look of a soft cover and the convenience of a hard, folding cover. Tri-fold, vinyl cover has a rail-free design, and it includes a self-contained, easy-to-use clamping system for fast installation and removal.

Features:

Retractable hard tonneau cover with contractor-grade ladder rack lets you haul ladders, lumber, and other cargo to the worksite. Heavy-duty aluminum cover locks every 12" along the rails, and it retracts easily with quick-release handle.

Features:

Soft tonneau rolls up to provide full truck bed access. Tension-free pinch levers prevent cover from popping up when you unlatch it. Self-tensioning frame with support beams keeps cover taut when closed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

This hard tonneau cover folds up toward your cab for full access to your truck bed. It secures to your cab with latches, making it safe for highway driving. Extruded aluminum panels withstand impact from hail and other falling objects.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Extang E-series tonneau cover features a tri-fold vinyl cover and an easy-to-use clamping system for installation and removal. Lightweight aluminum frame. Full perimeter seal keeps water out and prevents leaks.

Features:

The Vanish tonneau delivers a sleek, ultra-low profile and great features at an economical price. It sits only 1/2" above the bed, inside your vehicle's rails. XT-Dial offers quick tension adjustment, and a trigger latch secures the cover.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Hard, roll-up cover with heavy-duty vinyl fabric and thick aluminum slats is stylish and durable. Low-profile, self-leveling rails ensure easy install. Latches at tailgate and mid-bed offer enhanced security. Cover removes in seconds without tools.

Features:

Install crossbars (sold separately) in the slotted rails of this heavy-duty cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.

Features:

Get top-notch style and versatility with this aluminum and fiberglass tonneau. Quad-fold cover sits inside your vehicle's bed rails and secures upright for unrestricted bed access. Textured, black powder coat provides superb durability.

Features:

Trifecta 2.0 tonneau features a tri-fold, vinyl cover with a rail-free design, works with your existing 18" - 20" standard toolbox, and has an easy-to-use clamping system for installation and removal.

Features:

This hard tonneau cover folds up toward your cab for full access to your truck bed. It secures to your cab with latches, making it safe for highway driving. Extruded aluminum panels withstand impact from hail and other falling objects.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Retractable tonneau cover with truck bed rack lets you keep items secure in the bed and carry additional cargo above the bed. Tonneau cover has a 450 lb load capacity so you can use it to hold equipment or even stand on it. Black powder coat finish.

Features:

Heavy-duty, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails, and a cargo light makes it easy to see inside the bed. 1" Thick aluminum slats provide the best security.

Features:

Outfit your vehicle with the Deuce 2 tonneau cover and enjoy dual functionality and dual accessibility. This one-of-a-kind vinyl cover folds back 30" to allow easy access to the front of your truck bed - or rolls up and stores behind the cab.

Features:

Tri-fold cover combines a stylish, low-profile look with maximum protection for your truck bed and cargo. Impact-resistant, lightweight aluminum panels fasten to side rails at 10 points for security. Easy to remove without tools for full bed access.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Retractable tonneau cover with T-slot rails lets you add a light-duty ladder rack or roof rack to your vehicle. Aluminum and vinyl construction has strength of a hard cover and seamless look of a soft cover. Enhanced cargo protection keeps bed dry.

Features:

Retractable cover opens and closes manually with a pop-up, locking handle. That, paired with impact-resistant, 1" thick aluminum, will give you the best security for the cargo in your bed. Sleek, streamlined design complements your vehicle.

Features:

Tri-fold gloss black tonneau cover folds up to provide two-thirds or full truck bed access. Prop rods let you drive with cover open. Cover sits 1-1/4" above bed rails. Only shuts with the tailgate closed.

Features:

Tri-fold tonneau cover folds up to provide two-thirds or full truck bed access. Prop rods keep cover from coming in contact with cab. Cover sits 1-1/4" above bed rails. Shuts with the tailgate open or closed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Stay covered without overcomplicating things. This cover installs fast with a secure clamp system and protects your gear while keeping your vehicle's bed easy to access. Weather-resistant and simple to use, it is built for flexibility on the go.

Features:

Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.

Features:

The Trifecta ALX includes the same features as the Trifecta 2.0 but with a Secure Rotary Release Latching System at the tailgate and an automatic latching feature that willl make getting goods in and out of your truck bed that much faster.

Features:

Retractable tonneau cover with T-slot rails lets you add a light-duty ladder rack or roof rack to your vehicle. Heavy-duty aluminum panels and silicon hinges help seal the bed. Multiple weather seals and drain tubes offer enhanced cargo protection.

Features:

Retractable tonneau with T-slot rails lets you add a ladder rack or roof rack to your vehicle. Aluminum slats and vinyl top layer offer strength and security of a hard cover with seamless look of a soft cover. Cover locks at any point along rails.

Features:

Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.

Features:

The LiteRider roll-up tonneau cover balances great features and an affordable price. Get EZ-Dials for quick tension adjustment, an AutoLatch to secure the cover and the Access Slantback design. Cover sits 1-1/2" above your vehicle's bed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Easy in, easy on - this EZ Fold truck-bed cover clamps onto your side rails in minutes, and it folds up in seconds to allow access to your cargo. The low-profile cover also looks sharp, and it stores behind the cab when not in use.

Features:

Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.

Features:

From the job site to the open road, your cargo needs protection. This hard tri-fold cover shields your vehicle's truck bed with durable aluminum panels, locking in security while folding open fast when you need full access.

Features:

Retractable hard tonneau cover protects your cargo and truck bed. Heavy-duty aluminum panels and silicone hinges help seal bed. Cover locks at 12" increments along the rails, and retracts easily with a quick-release handle.

Features:

The weekend trip is set, but the weather isn't. With a quick roll, your cargo stays dry, secure. No drilling, no delays - just access when needed and coverage when you don't. Built tough, this cover keeps your vehicle ready for any adventure.

Features:

Retractable hard tonneau cover with contractor-grade ladder rack lets you haul ladders, lumber, and other cargo to the worksite. Heavy-duty aluminum cover locks every 12" along the rails, and it retracts easily with quick-release handle.

Features:

Heavy-duty, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails. Install crossbars (sold separately) in the slotted rails to carry bikes, kayaks, and more above your bed.

Features:

Electric, retractable tonneau cover with light-duty ladder rack lets you carry your bikes, kayaks, surfboards, and other recreational gear. Durable aluminum cover locks at any point along the rails, and the matte black looks great on your vehicle.

Features:

Retractable tonneau cover has rails with T-slots so you can add a ladder rack or roof rack. Remote opens and closes cover in under 30 seconds. Cover locks at any point along rails. Aluminum panels with silicon hinges offer superior water resistance.

Features:

Retractable hard tonneau cover has rails with T-slots so you can add a ladder rack or roof rack. Heavy-duty aluminum panels and silicon hinges seal the bed. Cover locks every 12" along rails and retracts with a quick-release handle.

Features:

Retractable, electric tonneau cover with all-purpose ladder rack lets you carry 800 lbs of cargo above your truck bed. Remote opens and closes cover in under 30 seconds. Cover locks at any point along the rails. Rack mounts to T-slots in cover rails.

Features:

Retractable tonneau cover with light-duty ladder rack lets you carry kayaks, surfboards, and other sports gear. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover. Offers enhanced cargo protection for your vehicle.

Features:

Get top-notch style and versatility with this aluminum and fiberglass tonneau. Quad-fold cover sits inside your vehicle's bed rails and secures upright for unrestricted bed access. Textured, black paint finish provides durability.

Features:

Retractable tonneau with all-purpose ladder rack for your vehicle lets you carry ladders during the week and kayaks on the weekend. Aluminum slats and vinyl top layer offer strength and security of a hard cover with the seamless look of a soft cover.

Features:

Retractable cover with all-purpose ladder rack lets you carry ladders and lumber during the week and kayaks on the weekend. Heavy-duty aluminum cover locks every 12" along the rails, and it retracts easily with a quick-release handle.

Features:

Retractable cover opens and closes manually with a pop-up, locking handle that provides excellent security for your truck bed. Durable polycarbonate is long-lasting and supremely weather resistant. Sleek, streamlined design complements your vehicle.

Features:

Retractable tonneau cover with light-duty ladder rack lets you carry your kayaks, surfboards, and other sports gear. Durable aluminum panels with silicon hinges and multiple weather seals offer enhanced cargo protection for the bed of your vehicle.

Features:

Retractable, electric tonneau cover with contractor-grade ladder rack lets you carry 1,200 lbs of cargo above your truck bed. Cover opens and closes with remote, and it locks anywhere along rails. Ladder rack extends over cab to carry long loads.

Features:

Retractable tonneau with contractor-grade, over-the-cab ladder rack for your vehicle lets you haul heavy cargo to a worksite. Aluminum slats and vinyl top layer combine the strength and security of a hard cover with the seamless look of a soft cover.

Features:

Retractable, electric tonneau cover with contractor-grade ladder rack lets you carry 1,200 lbs of cargo above your truck bed. Cover opens and closes with remote, and it locks anywhere along rails. Ladder rack extends over cab to carry long loads.

Features:

Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.

Features:

The original Access roll-up tonneau cover balances deluxe features with a reasonable price. Get the XT-Dial easy-grip tension adjuster, AutoLatch, Element weather seal, and famous Slantback design. Cover sits 1-1/2" above your vehicle's bed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

The Trifecta Signature 2.0 tonneau mounts using a self-contained clamping system instead of rails, allowing for temporary use and rapid installation and removal. This soft, tri-fold cover sports a matte black canvas skin that is durable and sleek.

Features:

Hard, roll-up cover with premium, 5-layer fabric and thick aluminum slats is stylish and durable. Low-profile, self-leveling rails ensure easy install. Latches at tailgate and mid-bed offer enhanced security. Cover removes in seconds without tools.

Features:

Retractable tonneau with contractor-grade, over-the-cab ladder rack for your vehicle lets you haul heavy cargo to a worksite. Aluminum slats and vinyl top layer combine the strength and security of a hard cover with the seamless look of a soft cover.

Features:

The Lorado roll-up tonneau has all the bells and whistles plus a low profile - it sits only 1" above your vehicle's bed. Features include an XT-Dial, Element weather seal, AutoLatch II, deluxe storage straps and the Access Slantback design.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Soft tonneau cover folds up against your cab for full truck bed access, or it can be partially opened for 2/3 truck bed access. It sits 1-1/2" above your bed rails and it can latch with your tailgate open. Tool-free, no drill installation.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Soft tonneau cover sits behind your 19" - 21" truck-bed toolbox. It features the XT-Dial, AutoLatch, and Access Slantback design - plus a tight seal between the toolbox and cover. Sits 1-1/2" above your vehicle's bed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Weather-resistant, roll-up cover keeps the gear in your truck bed secure and dry. Rolls up quickly by hand for full access to your truck bed. Aluminum slats keep cover tight and help prevent break in. Requires no drilling to install.

Features:

The Limited Edition roll-up tonneau cover has all the bells and whistles plus tie-down rings, the AutoLatch II, a LED light, the EZ-Retriever II, Cover Care cleaner, and a TrailSeal tailgate gasket. Cover sits 1-1/2" above your truck's bed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Electric, retractable tonneau cover with T-slot rails lets you add a ladder rack or roof rack to carry all your sports and recreational gear. Durable aluminum cover locks at any point along the rails, and the matte black looks great on your vehicle.

Features:

Tri-fold cover secures to side rails at 10 points for maximum security for your truck bed and cargo. Heavy-duty, lightweight aluminum panels feature a diamond plate finish for a bold, aggressive look. Easy to remove without tools for full bed access.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Install crossbars (sold separately) in the slotted rails of this long-lasting cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.

Features:

You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can remove it just as quickly for full bed access. Heavy-gauge aluminum panels with silicone hinges help protect your cargo from the elements.

Features:

Retractable hard tonneau cover protects your cargo and truck bed from the elements. Heavy-duty aluminum panels and silicone hinges help seal bed. Cover locks every 12" along the rails, and it retracts easily with a quick-release handle.