2005 Cadillac Escalade EXT Tonneau Cover

Hey Joe. There's no timeline for when a plug in wiring harness will be available for a 2025 Hyundai Santa Cruz. I completely get your resistance to wanting to cut into the wiring on your brand new vehicle. Congrats btw! The only solution I have…

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

Hey Raymond, with the BAKFlip F1 part #BAK37FR folded up but not up against the back of the rear glass of the truck you will be able to tow your fifth wheel trailer. There would be enough access to the truck bed and hitch since you have a long bed…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

It looks like you are referring to the Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black #311-SWFA19A45 and the Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black…

Hi Mike; the best option for your 2025 Silverado 2500 ZR2 is definitely the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 you looked at. These are going to be the most reliable and durable air bags out there. With a max psi of…

Hey there Harry, that's a good question, as the difference is the strength of the aluminum vs. polycarbonate Retrax tonneau covers that fit your 2024 Ram 3500 with a 6-1/2 foot bed. The aluminum RetraxPRO MX Hard Tonneau Cover #RT80232 has the…

Hi JD; if I had to choose between the Leer Hard Tonneau Cover #LE67FR and BAKFlip MX4 #BAK448133 I would go with the MX4. As far as security goes both are locking covers so it will be about the same between the two. The MX4 has seals and drain tubes…

Hi Mark, I see you went with the B&W Patriot—fantastic choice! Given that you have a 5 3/4' bed, I’d recommend a roll-up cover like the TruXedo TruXport Soft Roll-Up Tonneau Cover #TX272401. Unlike a folding cover, a roll-up design takes up…

Hey Dennis, thanks to the feedback you provided we do know that the Pace Edwards UltraGroove #311-KMDA24A55 will work on your 2025 Ram 1500 that has the power tailgate but you will need to move the rails slightly forward.

Hey Joel! Yes, the Rhino-Rack Vortex Crossbars #RRVA180B-RRRLT600 are compatible with the T-slot rails on the RetraxPRO XR Hard Tonneau Cover #RTT-80383. This cover is designed for a 6-3/4' bed so as long as you have that bed length on your 2024…