2000 GMC Sierra Truck Tailgate Lock

It sounds like you might be searching for some replacement electric trailer braking assemblies or possibly just replacement parts. It's typically not much less cost effective to just replace the entire assembly so that's what I recommend. I…

It is possible to combine a tailgate lock and a lock for a Leer camper shell. The best way to do this is to use the Pop & Lock Custom Tailgate Lock #PL34FR, which will work with the factory keyless entry system on your 2017 Toyota Tacoma. You can…

I have linked the installation instructions for the Pop & Lock Custom Tailgate Lock with Plug & Play T-Harness #PL34FR below. You will want to see page 7 to locate where the plug and play harness ties into the factory wiring behind the…

I verified with Pop and Lock and the tail gate lock #PAL1700C is a fit for a 2011 GMC Canyon. We have not yet had the opportunity to install the lock on a vehicle so I do not have an installation video I can link you to. Installation is not…

I have attached an image of the full installation instructions for the Pop & Lock Custom Tailgate Lock #PAL8450 below that you can review. Step 3 in particular details the wiring procedure for your truck. Please just let me know if you have any…

Yes, the Pop & Lock Custom Tailgate Lock #PAL1100 will fit your 1999 Silverado with the regular cab and 6-1/2' bed. This integrates into your OEM handle for a factory look and will allow you to secure your tailgate.

We do have some tailgate lock options for your 2004 GMC Canyon. But Replacement BOLT Lock Cylinder #BL709231 will not work with the 2004 GMC Canyon. It isn't necessarily because of the lock or truck but because it does not accept the 2004 Canyon…

While I cannot comment about Inexrud because I've never heard of them and we don't sell them, I can say for your 2012 Chevy Silverado 1500 long bed, if you want the best folding cover, you nailed one of the two options with the Extang…

The BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum #BAK26102 weighs 71lbs. This cover is confirmed to fit your 2008 Chevy Silverado 2500 with the 8' bed without cargo management system. This is a really nice system that requires no drilling…

The Pop & Lock Custom Locking Tailgate Handle and Truck Bed Storage Box Lock for Toyota Tacoma #PL5330 has a pop out for a tailgate camera and a new mounting bracket #PL5455CAMB for the camera to connect to. This specific lock is compatible with…

The wiring harness you will need to access to install the Pop & Lock Custom Tailgate Lock part #PAL8200 on your 2009 Ford Ranger will be under the passenger's side kick panel. Once the kick panel is removed you will need to test each of the…

When installing the Pop & Lock Custom Tailgate Lock, #PAL3300, on your 1995 Dodge Ram Pickup you will need to remove the lower of the three bolts and loosen the other two. I have attached installation instructions for you.