2003 Pontiac Aztek Vehicle Tow Bar Wiring

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

Yes, it will! You'll want to cut off the 4-way connector of the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR and install the 6-way connector that comes with the Curt Tow Bar 7-Way to 6-Way Coiled Adapter Cord w/ 6-Way Socket…

Hi Russ; you pretty much have everything you need right there with the exception of a few parts. I'm going to go ahead and list it all out here with links to make it easy for your to manage. You will need the following: -etrailer Invisible Base…

Yes, it does Gary! The Blue Ox Base Plate Kit item #BX2914 has been confirmed to fit the 2025 Ford Maverick hybrid. I have linked a installation video below along with the instructions so you can see how to get it set up. If you have any additional…

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

Hi Tony, thanks for writing in and yes, we can 100% get your 2023 Jeep Wrangler set up to be flat towed behind your Holiday Rambler motorhome. To make it easy to order I'll go ahead and list everything out for you. - Base Plate Kit: Roadmaster…

Hey Steve, thanks for reaching out again! Hopkins doesn't have any exceptions for their Wiring Kit #HM39VR which normally means it's compatible, but even though this is easier to install than a lot of the other options, from my experience I…

Hey Ed! It looks like you put together a great list of parts. I'm going to list everything out here with links so it is all in one place, including my suggestions. For a complete setup you will need the following: -etrailer Invisible Base Plate…

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…