2006 Kia Rio 5 Vehicle Air Mattress

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

Hey Andy, thanks for reaching out! The Stealth Hitches Hidden Rack Receiver #SH37MR fits older models of a Mercedes-Benz but for your 2023 Mercedes-Benz E450 4MATIC we have the EcoHitch Stealth Trailer Hitch Receiver#EH55SR which is the EcoHitch…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

To tow a trailer with your 2024 Toyota Grand Highlander Hybrid you will need the following parts: Trailer Hitch - Draw-Tite Max-Frame Trailer Hitch Receiver item #DT95PR. This is a custom fit class III hitch with a 2" receiver. It bolts to your…

Hi Tom, Good observation, and I can confirm for you that yes, the Draw-Tite Trailer Hitch Receiver #36643 does fit your 2020 Toyota Camry hybrid with the exhaust on the driver's side. I have added a cut out of a review for you a customer was nice…

I would be happy to! To add a hitch to your 2024 Kia Telluride, I recommend the etrailer item #e45ZR. This hitch is custom fit and bolts to your Kia with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper…

Hey Bob, There is indeed a loading ramp from Thule that will work with any of the Epos bike racks - the Thule Epos 3-Bike Rack #TH69XE, Thule Epos 2-Bike Rack w/ LED Lights #TH49XE, and Thule Epos 2-Bike Rack #TH99XE. I went ahead and verified for…

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The…

For a 55 lbs bike you're definitely going to need to use a hitch mounted bike rack. No roof mounted bike rack has that high of a capacity. The best one for your EMTB is going to be the Thule Epos Bike Rack item #TH99XE. This is our highest…