Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Designed for models with dual rear wheels only
More Information >Vehicle Suspension Specs:
Features:
7,500-lb Capacity. 7" Diameter LoadLifter 7500 XL Ultimate air springs upgrade your rear suspension with full-time load support. They level your vehicle, improve braking and ride comfort, and reduce the strain on your factory suspension.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Designed for models with dual rear wheels only
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Designed for models with dual rear wheels only
More Information >Vehicle Suspension Specs:
Features:
7,500-lb Capacity. Heavy duty air springs support rear suspension for safety and stability when hauling your heaviest loads. Springs reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Tech Tip:
Product is compatible with select FX4 models: measure from top of rear axle to top of jounce bumper stop; must equal 40, 70 or 80mm for this application to fit.
More Information >Vehicle Suspension Specs:
Features:
7,500-lb Capacity. 7" Diameter LoadLifter 7500 XL Ultimate air springs upgrade your rear suspension with full-time load support. They level your vehicle, improve braking and ride comfort, and reduce the strain on your factory suspension.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Does not fit models with dual rear wheels
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Does not fit models with dual rear wheels
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Tech Tip:
Product is compatible with select FX4 models: measure from top of rear axle to top of jounce bumper stop; must equal 40, 70 or 80mm for this application to fit.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling required for installation
Compatible with in-bed hitch
Does not fit models with dual rear wheels
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling required for installation
This product installs to the frame in the same location as most fifth wheel and gooseneck brackets and may not be compatible with in-bed hitch. Refer to instructions for location of installation.
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 7-1/2"
More Information >Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your front suspension when you are pushing a plow. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling required for installation
More Information >Videos
for Vehicle Suspension
Help Articles
for Vehicle Suspension
Expert Answers
for Vehicle Suspension
Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will…
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your…
view full answer...We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…
view full answer...Filter Products (20)
Contact and Help
What our customers are saying:
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA