Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.
Installation Notes:
No drilling required for installation
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.
Installation Notes:
No drilling required for installation
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling required for installation
Designed for use on Cutaway models only
Check vertical clearance above spring pack before purchase. Product only fits vehicles with floor pan that is higher than top of frame
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling required for installation
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling required for installation
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling required for installation
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling required for installation
Designed for vehicles with a Boxed Frame and a GVWR greater than 7,300 lbs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling required for installation
Designed for vehicles with a C-channel frame
More Information >Vehicle Suspension Specs:
Features:
4,600-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for those who often tow or haul heavy loads.
Installation Notes:
No drilling required for installation
Designed for use on Cutaway models only
Check vertical clearance above spring pack before purchase. Product only fits vehicles with floor pan that is higher than top of frame
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling required for installation
Designed for vehicles with a C-channel frame
More Information >Vehicle Suspension Specs:
Features:
4,070-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Increases ride height by 1-3/4".
Installation Notes:
No drilling required for installation
Designed for vehicles with Diesel Engine only
Product will add approximately 1.75" of lift to suspension
More Information >Vehicle Suspension Specs:
Features:
4,070-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Increases ride height by 1-3/4".
Installation Notes:
No drilling required for installation
Designed for vehicles with Diesel Engine only
Product will add approximately 1.75" of lift to suspension
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling required for installation
Product is designed for use on Cutaway models only
Product is designed for vehicles with approximately 2-1/2 inch wide springs
More Information >Videos
for Vehicle Suspension
Help Articles
for Vehicle Suspension
Expert Answers
for Vehicle Suspension
Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will…
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight…
view full answer...We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x…
view full answer...A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will…
view full answer...