Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling required for installation
Spacers are not able to be used with this kit because the center bolt is welded to the plate and cannot be replaced with a longer bolt
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Level your vehicle when you're hauling a heavy load with these Ride Control air springs. The adjustable springs improve overall stability and ride quality, eliminate rear sag, and reduce strain on your factory suspension.
Installation Notes:
Drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Level your vehicle when you're hauling a heavy load with these Ride Control air springs. The adjustable springs improve overall stability and ride quality, eliminate rear sag, and reduce strain on your factory suspension.
Installation Notes:
Drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
800-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
1,100-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Installation Notes:
No drilling required for installation
The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).
More Information >Vehicle Suspension Specs:
Features:
750-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Installation Notes:
No drilling required for installation
The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).
More Information >Vehicle Suspension Specs:
Features:
1,100-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling required for installation
More Information >Videos
for Vehicle Suspension
Help Articles
for Vehicle Suspension
Expert Answers
for Vehicle Suspension
For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...What…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression…
view full answer...Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure…
view full answer...Filter Products (24)
Contact and Help
What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN