Expert Review Video:
Vehicle Suspension Specs:
Features:
1,000-lb Capacity. Air Lift 1000 molded polyurethane air springs fit inside your vehicle's existing front coil suspension. They provide support for better handling, braking, and ride quality when using snowplows or other front-end accessories.
Installation Notes:
Drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Loading up your truck shouldn't make you dread the drive. These air bags keep you level and in control when packing for weekend adventures. It's a smart way to take the stress out of hauling and enjoy the drive again.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 6".
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Loading up your truck shouldn't make you dread the drive. These air bags keep you level and in control when packing for weekend adventures. It's a smart way to take the stress out of hauling and enjoy the drive again.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 6".
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles without rear air conditioning
Product is designed for vehicles with approximately 2-1/2 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles without rear air conditioning
Product is designed for vehicles with approximately 2-1/2 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your front suspension when you are pushing a plow. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles without rear air conditioning
Product is designed for vehicles with approximately 2-1/2 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles without rear air conditioning
Product is designed for vehicles with approximately 2-1/2 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles without rear air conditioning
Product is designed for vehicles with approximately 2-1/2 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles without rear air conditioning
Product is designed for vehicles with approximately 2-1/2 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).
Tech Tip:
Factory bumpstops, if present, must be removed for installation.
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).
Tech Tip:
Factory bumpstops, if present, must be removed for installation.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles without rear air conditioning
Product is designed for vehicles with approximately 3 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles without rear air conditioning
Product is designed for vehicles with approximately 3 inch wide springs
More Information >Vehicle Suspension Specs:
Features:
950-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).
Tech Tip:
Factory bumpstops, if present, must be removed for installation.
More Information >Vehicle Suspension Specs:
Features:
950-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).
Tech Tip:
Factory bumpstops, if present, must be removed for installation.
More Information >
Filters
