1980 Chevrolet Blazer Suspension Enhancement

Name: Timbren Suspension Enhancement System - Front Axle
Brand: Timbren
SKU: TGMFK10F
Price: 269.36 USD
Availability: InStock
Rating: 4.67166392092257 (6070 reviews)

Filter Results

Timbren Suspension Enhancement System - Front Axle 1980 Chevrolet Blazer
4 Wheel Drive Models

6070 reviews

Code: TGMFK10F

Our Price: $269.36

In Stock

Vehicle Suspension Specs:

Front Axle Suspension Enhancement
Jounce-Style Springs
Standard Duty

Features:

...Because each spring is making constant contact with the axle, it is always working to cushion and support your factory suspension. Timbren Suspension Enhancement Systems are designed to work progressively...

Installation Notes:

No drilling required for installation

More Information >

Firestone Coil-Rite Air Helper Springs - Front Axle 1980 Chevrolet Blazer
2 Wheel Drive Models

635 reviews

Code: F4100

Our Price: $124.01

In Stock

Vehicle Suspension Specs:

Front Axle Suspension Enhancement
Air Springs
Light Duty

Features:

...span>axle and reduces contact between your rear tires and the road, causing problems with braking, steering control and traction. By adding air springs to your front suspension, you can help to level your...

Installation Notes:

No drilling required for installation

More Information >

Air Lift 1000 Air Helper Springs for Coil Springs - Front 1980 Chevrolet Blazer
2 Wheel Drive Models

1118 reviews

Code: AL81560

Retail:$187.15

Our Price: $160.53

You Save: $26.62

In Stock

Vehicle Suspension Specs:

Front Axle Suspension Enhancement
Air Springs
Light Duty

Features:

...Provides 1,000 lbs of load-leveling support to improve safety and ride quality Supports your existing front coil spring suspension when you're using a winch, snowplow, grille g...

Installation Notes:

Drilling required for installation

More Information >

Timbren Front Suspension Enhancement System 1980 Chevrolet Blazer
2 Wheel Drive Models

6070 reviews

Code: TGMFC15

Retail:$316.90

Our Price: $269.36

You Save: $47.54

Vehicle Suspension Specs:

Front Axle Suspension Enhancement
Jounce-Style Springs
Light Duty

Features:

...factory suspension to keep your vehicle level and improve your driving experience. The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above your front axle. Hollow rubber...

Installation Notes:

No drilling required for installation

More Information >

Explore Expert Info

on Vehicle Suspension

Videos

for Vehicle Suspension

Help Articles

for Vehicle Suspension

Expert Answers

for Vehicle Suspension

Timbren Rear Suspension Enhancement System Review RU-18-TA-00302588

Air Lift LoadLifter 5000 Ultimate Rear Air Helper Springs with Internal Jounce Bumpers Review

Air Lift LoadLifter 5000 Air Helper Springs Review

Roadmaster Active Suspension Leaf Spring Kit Review

Choosing the Right Trailer Wiring

Air Lift LoadLifter 5000 Rear Axle Air Helper Springs Review

Air Lift LoadLifter Rear Air Helper Springs Review

Air Lift AirLift 1000 Air Helper Springs Review

Stability Plus Stabilizer Helper Springs Review

Timbren Front Suspension Enhancement System Review

Timbren Manufacturer Spotlight - Suspension Enhancement

Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500

Choosing the Right Suspension Kit for Your Truck and Trailer

Trailer Wiring Diagrams

Best Air Bag Suspension (2023)

Brake Controller 7- and 4-Way Installation Kit (ETBC7)

Stability Control for Heavy Duty Vehicles

RV Sway Control, Stabilization, and Suspension Enhancement

5 Things to Know About Weight Distribution Hitches

Determining Trailer Tongue Weight

Trailer Tire Sizing

How to Mount a Truck Bed Camper

How to Accurately Measure Trailer Leaf Springs

Performance Chips and Modules

Best Way to Prevent Sagging Suspension When Towing a Trailer

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…

view full answer...

What is the Estimated Installation Time for Firestone Ride-Rite Air Bags on a 2006 Ford F-250

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will…

view full answer...

Choosing Between Air Lift Load Lifter 5000 or 7500 For 2018 Ram 2500 Towing 5th Wheel

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression…

view full answer...

Hanger Spacing for 3500 LB. Tandem Axle Trailer

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…

view full answer...

10k Dexter Replacement Hub for a 8-415

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?

What…

view full answer...

Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles -…

view full answer...