Spare Tire Covers Specs:
Features:
Extend the life of your trailer's spare tire by protecting it from the sun, dirt, grime, and road salt with this weather-resistant vinyl cover. Elastic-trimmed rear opening gives a snug fit and the vented bottom lets moisture escape.
More Information >Spare Tire Covers Specs:
Features:
Extend the life of your trailer's spare tire by protecting it from the sun, dirt, grime, and road salt with this weather-resistant vinyl cover. Elastic-trimmed rear opening gives a snug fit and the vented bottom lets moisture escape.
More Information >Spare Tire Covers Specs:
Features:
Extend the life of your trailer's spare tire by protecting it from the sun, dirt, grime, and road salt with this weather-resistant vinyl cover. Elastic-trimmed rear opening gives a snug fit and the vented bottom lets moisture escape.
More Information >Videos
for Spare Tire Covers
Help Articles
for Spare Tire Covers
Expert Answers
for Spare Tire Covers
It sounds like the 2022 Chevy Silverado 3500 you are getting has the short bed. In that case, yes, you definitely want the sliding 5th wheel hitch for clearance. The good news is you will not need to purchase the entire B&W Companion…
view full answer...Your 265/70R17 size tire is around 31-1/2 inches in diameter. You want to make sure the tire cover you get is large enough and doesn't have to be stretched over the tire. I'd rather have one that's slightly loose than one that…
view full answer...Yes, you can replace your GE air conditoner with an Advent air conditioner like the Advent Air RV Air Conditioner #ACM150. Additionally, you will also need a thermostat. For that, you can use the Air Distribution Box w/ Built-In Thermostat for…
view full answer...Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but…
view full answer...To allow for full articulation so you don't have to worry about the tires bottoming out int he wheel wells, I'd recommend going with a 15° down torsion axle. If the original axle was a 0°, this would raise the…
view full answer...Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…
view full answer...The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…
view full answer...It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…
view full answer...Your ST235/80R16 spare tire when fully inflated does indeed have an overall diameter of about 31-inches so your measurement is right on. For reference the linked article includes a chart that shows the overall diameters of various trailer tire sizes.…
view full answer...John, the Camco Vinyl Spare Tire Cover #CAM45254 is designed to specifically fit a 31 1/4" tire so with your tire being 30.8" it's not going to work. Instead, you'd need to use something like the Universal Spare Tire Cover…
view full answer...Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with a…
view full answer...From your question it sounds to me like someone has cut off the tow package plug on your 2005 Ford F-150 and wired in a 4-way connector. In this case you could use the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole, #37185 which will give you a 4-way…
view full answer...Filter Products (6)
Contact and Help
What our customers are saying:
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA