You've got the RV leveled and stabilizers down, but the coach still shakes once bikes are hanging off the back. This stabilizer mounts to most 2" bike rack shanks and uses ratchet tension to steady the RV while you move around camp.
Cross brace bars permanently attach to your fifth wheel's landing gear to reduce your trailer's movement while parked. After installation, the braces will extend and retract with your landing gear. Hand-tighten tubes to increase stability.
If every step rattles the dishes or settling into your chair rocks the camper, it's time for more stability. With the I-Beam Stabilizer, everything settles down and you get that firm, planted feeling, like your rig's anchored in place.
Hitch-mounted stabilizer system reduces movement of your 5th-wheel trailer, van, or RV while it's parked. Legs have 4 locking positions for 16" of adjustability. The system collapses for compact storage.
Cross brace bars permanently attach to your scissor jacks to reduce your RV's movement while parked. Once installed, the braces will extend and retract along with your scissor jacks. Tension handle lets you adjust the bars to increase stability.
Get a smoother towing experience by upgrading to these rubber equalizers that absorb road shock and reduce chucking. Up to 3" of suspension travel helps to compensate for different types of terrain. Fits trailers with double-eye leaf springs.
Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…
Hey Shane, Can you email me some pictures of your setup so I can see what you're working with? I'll send you a separate email to reply to. Update: Got your picture, unfortunately the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer…
Hey John! The Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY37ND is not Lippert approved yet. This is designed to replace a pin box with a Lippert Rhino bolt pattern, and is the same exact length as the factory pin box. Gen-Y does stand behind…
Hi Travis; those look pretty flat so I don't think 26" would do it either. The 25-1/4" long #EM86RB you ordered will be a better fit. Completely flat these would have a similar measurement at just over 26" which is in line with…
Hey Darrel, we actually have exactly what you are looking for with the part #TRU52FR which is for a 7k axle and is 25-1/4 inch from eye to eye. This is also a 6 leaf spring as well. The spring you referenced would be too short.
Hello Daniel, thanks for reaching out. The Timken Bearing Kit #TMK52VR uses the standard 3,500 lb bearing sizes so it SHOULD fit your 3.5K Terran axle. The only way to absolutely confirm this will be to pull a hub and check/measure the bearings. The…
It looks like you have the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR mounted in the highest position. You should be able to raise the pin box in the mounting arms to help lower the front of your trailer on your truck. If you…
Dometic purchased Atwood a number of years ago and has been slowly phasing out their line of water heaters so there is no longer any GC6AA-10E water heaters available. That being said the Dometic RV Water Heater #DMC74FR is basically the same thing,…
A good water heater to replace your Atwood GC6AA/10E 6-gallon heater is the Dometic RV Water Heater - Gas and Electric - Automatic Pilot #DMC74FR. Like your Atwood, this is a 6-gallon heater and requires a 12-3/4" tall x 12-3/4" wide x…
The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…
When using the Furrion RV Tankless Water Heater #FR93FR, there is not a door conversation kit. There are just 3 different door sizes to choose from. - Replacement Access Door for Furrion RV Tankless Water Heater #FR43FR (16" x 16") -…
Hey Pat, congrats on your new trailer. Since you're converting over to a 50 Amp SmartPlug RV Power Inlet like item #SM56FR, you can use the SmartPlug Marine Power Cord Adapter - 50 Amp Female to 30 Amp Male Twist Lock Connector item #SM43VR This…
Increase the lateral strength of your fifth wheel or travel trailer suspension with this steel crossmember. The crossmember easily adjusts to fit the width of your trailer's frame.
Filters
