This weld-on adaptor converts your existing A-frame trailer to accept vertical channel couplers. Vertical channel is 3-1/2" x 11-3/4" with 2" on-center bolt pattern. ... Features: Weld-on adaptor converts your existing 50 degree A-frame trailer to a channel mount A-frame Comes fully welded - ready for application Adaptor has standard jack hole 6 Adjustment holes accomodate most vertical channel couplers Welding required for installation Made in the USA Specs: Application: 50 degree A-frame trailer Gross towing weight: 20,000 lbs Tongue weight: 2,000 lbs Channel width: 3-1/2" Outer rear width: 11" Front-to-back length: 7-1/2" 1-Year warranty
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a direct place to connect, so you spend less time re-hooking and repositioning tie-downs.Weld-On Clip Lets You Build the Setup You Want The included weld-on clip gives you a dedicated mounting point for the D-ring once installed.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. The curved D-ring gives hooks and straps more room to seat, so you can cinch down hard without fighting a flat ring.Weld-On Clip Lets You Build the Setup You Want The included weld-on clip gives you a dedicated mounting point for the D-ring once installed.
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows effortless greasing.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 27-1/8" Retracted 41-7/8" Extended Total lift: 28-3/4" Screw travel: 15" Drop leg travel: 13-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows simple greasing. Sidewind crank included.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Lift capacity: 12,000 lbs Support capacity : 15,000 lbs Total travel: 28-3/4" Screw travel : 15" Drop leg travel : 13-3/4" Overall height: 27-1/8" Retracted 41-7/8" Extended Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" on center Jack screw diameter: 1" 1-Year warranty
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Weld-on jack has a retracted height of 24-3/4" and an extended height of 40-1/8". Square design provides superior side-load support. ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 24-3/4" Retracted 40-1/8" Extended Total lift: 28-7/8" Screw travel: 15-3/8" Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 6" wide Handle radius: 7-3/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty
Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has a claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black powder coated outer tube Zinc finished inner tube, footplate, and handle for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of handle mount): 24-1/4" Retracted 39-1/2" Extended Total lift: 29" Screw travel: 15-1/4" Drop leg travel: 13-3/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7-7/8" long x 5-7/8" wide Handle radius: 9-3/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between bottommost holes 1-Year warranty
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down hard without reworking tie-downs.Weld-On Clip Lets You Build the Setup You Want The included weld-on clip gives you a dedicated mounting point for the D-ring once installed.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down hard without shifting tie-downs.Weld-On Clip Lets You Build the Setup You Want The included weld-on clip gives you a dedicated mounting point for the D-ring once installed.
Included weld-on pipe mount lets you pivot jack up for travel and down for use. Retracted height is 14-1/2". Extended height is 29-7/8". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-7/8" Extended Total lift: 28-7/8" Screw travel: 15-3/8 Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 5-7/8" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
A-frame coupler features a wraparound yoke latch that catches to remain open while you position coupler over ball. Black powder coat finish provides strength and durability.Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Yoke latch makes it easy to clamp around ball Lift up and back on the latch to open Push forward and down to close Sturdy steel construction Black powder coat finish provides corrosion resistance Built-in jack-attachment point allows for quick, easy mounting of round utility jack SAE J684 certified Weld-on installation Specs: Ball size: 2" Jack hole diameter: 2-1/4" Overall dimensions: 13-3/4" long x 9-1/2" wide Pin hole diameter: 5/16" Minimum span needed for pin or pin lock: 1-1/4" Weight capacity: 8,000 lbs 1-Year warranty
A-frame coupler features a thumb latch for safe, easy hookup. Simply push latch down and slide forward or back to open or close ball socket. Black powder coat finish provides durability and rust resistance.Features: 50-Degree A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Thumb latch makes it easy to clamp around ball Push latch down and slide it back toward the trailer to open the ball socket Push latch down and slide it forward to close Sturdy steel construction Black powder coat finish provides corrosion resistance Built-in jack-attachment point allows for quick, easy mounting of round utility jack SAE J684 certified Weld-on installation Specs: Ball size: 2-5/16" Jack hole diameter: 2-1/4" Overall dimensions: 12-7/8" long x 10-7/8" wide Pin hole diameter: 5/16" Minimum span needed for pin or pin lock: 7/8" Weight capacity: 14,000 lbs 1-Year warranty
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down without reworking tie-downs.Weld-On Clip Lets You Build the Setup You Want The included weld-on clip gives you a dedicated mounting point for the D-ring once installed.
... Retracted height is 15-1/4". Extended height is 30-1/8". Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 15-1/4" Retracted 30-1/8" Extended Travel: 14-7/8" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 6-1/2" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
This swivel jack pivots up for travel and down for use. Retracted height is 16". Extended height is 31-1/4". Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 16" Retracted 31-1/4" Extended Travel: 15-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-3/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
Weld-on jack has a retracted height of 24-5/8" and an extended height of 39-7/8". The square design provides superior side-load support. ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black powder coated outer tube and zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 24-5/8" Retracted 39-7/8" Extended Total lift: 28-3/4" Screw travel: 15-1/4" Drop leg travel: 13-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Handle radius: 7-3/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty
... Retracted height is 10-1/4". Extended height is 20-7/8". Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 11-1/2" Retracted 21-1/2" Extended Travel: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Sidewind handle has zinc finish for attractive look and rust resistance Outer tube has corrosion-resistant black powder coat Inner tube and footplate have durable, rust-resistant, clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 15-1/2" Retracted 30" Extended Travel: 14-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-7/8" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 6-1/4" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has a claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black powder coated outer tube and zinc finished inner tube, footplate, and handle for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of handle mount): 24-1/4" Retracted 39-1/2" Extended Total lift: 28-3/4" Screw travel: 15-1/4" Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 6" wide Handle radius: 9-3/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
... Retracted height is 10-1/4". Extended height is 20-1/4". Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 10-1/4" Retracted 20-1/4" Extended Travel: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Filters
