7-15/16" Waterproof, LED light displays brake, tail, and turn signals on the passenger side of your trailer, and also provides a side marker light. It mounts on the surface of your trailer with the included bolts and hardwires to the trailer.Features: Rectangular brake, tail, turn signal, and side marker light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Potted circuitry protects against moisture, corrosion, and vibration Surface mount with included bolts Hardwires with pigtail harness DOT compliant Specs: Application: passenger side Driver side: PE27RV (sold separately) Overall dimensions: 7-15/16" wide x 2-7/8" tall x 2-7/8" thick Compatible with 12V DC systems Diodes: 10 Power draw at 12V: Stop/turn: 0.15 amps Tail: 0.5 amps Limited lifetime warranty
Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. ... Features: Pre-wired LED light assembly mounts on fender to mark widest point of trailer Amber LED light points toward front of trailer to act as front clearance light Red LED light faces rearward to act as rear clearance light Long-lasting LEDs are great replacements for incandescent lights No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power draw Sealed, polycarbonate lenses are waterproof Easy installation with durable, ABS plastic mounting bracket and housing Mounting screws not included 2-Wire design - includes ground wire and lead wire for power Department of Transportation compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Application: trailers over 80" wide Installs on right fender (passenger's side) of trailer Housing dimensions: 1-5/8" wide x 4-3/4" long x 1-1/4" tall Width including lights: 2-1/8" Diodes: 2 Power draw: 0.047 amps at 12.8 volts Lifetime warranty on LEDs 3-Year warranty on housing and wiring
Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. ... Features: Pre-wired LED light assembly mounts on fender to mark widest point of trailer Amber LED light points toward front of trailer to act as front clearance light Red LED light faces rearward to act as rear clearance light Long-lasting LEDs are great replacements for incandescent lights No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power draw Sealed, polycarbonate lenses are waterproof Easy installation with durable, ABS plastic mounting bracket and housing Mounting screws not included 2-Wire design - includes ground wire and lead wire for power Department of Transportation compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Application: trailers over 80" wide Installs on left fender (driver's side) of trailer Housing dimensions: 1-5/8" wide x 4-3/4" long x 1-1/4" tall Diodes: 2 Power draw: 0.047 amps at 12.8 volts Lifetime warranty on LEDs 3-Year warranty on housing and wiring
Replace your old trailer fender with this corrosion-proof, impact- and heat-resistant plastic fender. Black, molded-in color won't show scratches. Built-in side steps.Features: Replaces your old single-axle fender Resists corrosion and impacts - made of high-density polyethylene material Built-in fender skirt Black color is molded in - scratches will be hard to see Made in the USA Specs: Application: single-axle trailers with 13" diameter wheels Dimensions: 9" wide x 32" " long x 7-1/2" tall
Replace your old trailer fender with this corrosion-proof, impact- and heat-resistant plastic fender. Black, molded-in color won't show scratches. Built-in top and side steps.Features: Provides 3 steps - top, front, and rear Resists corrosion and impacts - made of high-density polyethylene material Built-in fender skirt Scratches will be hard to see thanks to the molded-in black color Includes mounting slots for easy installation Made in the USA Specs: Application: single-axle trailers with 12" diameter wheels Dimensions: 7-1/2" wide x 33-1/2" long x 6-3/4" tall
Need a complete lighting setup for your trailer? This kit includes everything required for trailers under 80" wide, making it easy to get fully equipped and compliant. It installs easily and covers all your essential lighting needs.Features: Trailer light kit designed to provide complete lighting for trailers under 80" wide Includes tail lights, side marker lights, wiring harness, and license bracket Provides all required lighting and reflectors for DOT compliance 20&' Trailer harness allows full trailer connection License bracket made of corrosion-free black plastic that flexes on impact Mounting hardware and installation instructions included Easy installation for complete setup Includes 1 complete trailer light kit Specs: Application: Trailers under 80" wide Tail light dimensions: 4-3/4" x 4-1/2" Harness length: 20' Light colors: Red, white, amber
Dim or dead amber lights make your trailer harder to see from the front and sides. This LED upgrade replaces older incandescent fixtures and helps keep your rig visible, compliant, and ready for the next trip without constant bulb swaps.Highlights Stay Visible Up Front: Amber LED handles front, rear, or side marker and clearance duties. PC Rated Dual Function: Mount on a 45 corner to serve as both marker and clearance light. Bright Output, Lower Draw: 16-diode design uses less power than incandescent lamps.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.Features: Rectangular combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted Stop, tail, turn, side marker, side reflex, rear clearance, and rear reflex Built-in license plate light on driver's-side light illuminates license plate Sealed, waterproof construction is submersible Designed for marine trailer applications Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red acrylic lens screws on and can be easily replaced Molded plastic housing Mounts on surface of trailer - hardware included 3-Wire pigtail DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting P2 rated Specs: Configuration: driver side (STL17RB) Passenger side (STL16RB) Dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Total diodes: 40 Driver's-side light: 22 diodes Passenger's-side light: 18 diodes Power draw at 12.8 volts: Stop/turn signal light: 0.259 amps Tail light: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of these lights make them ideal for use on trailers that may be submerged, like a boat trailer.
... This LED replacement mounts in place of old incandescent units and keeps the rear or side of your trailer clearly marked.Highlights Stay Legal And Visible: Red LED handles rear or side marker and clearance duties. PC Rated Dual Function: Mount on a 45 degree corner to serve as both marker and clearance light. Bright Output, Lower Draw: 16-diode design uses less power than incandescent lamps.
7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 5 functions: brake, tail, turn, rear reflex, and side marker. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plugFeatures: LED trailer combination tail light serves 5 functions Stop, tail, turn, reflector, and side marker ONE Series provides bright light using fewer diodes than other LED lights Sonically sealed, waterproof housing and lens unit is submersible Built-in rear reflex reflector removes the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red screw-on lens over white LED Surface mount on trailer - hardware included Molded 3-prong plug provides a watertight connection DOT compliant Specs: Configuration: passenger side Driver side: STL0067RPG (sold separately) Dimensions: 7-3/4" long x 3-1/8" tall x 2-7/8" deep Total diodes: 3 Tail: 1 Turn signal: 2 Power draw at 12.8V: Stop: 0.154 amps Tail/turn: 0.060 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 6 functions: brake, tail, turn, reflex, side marker, and license plate light. Durable polycarbonate lens and housing. ... Features: LED trailer tail light serves 6 functions Stop, tail, turn, reflector, and side marker License plate light illuminates your trailers license plate for easy identification ONE Series provides bright light using fewer diodes than other LED lights Sonically sealed, waterproof housing and lens unit is submersible Built-in reflex reflector removes the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red screw-on lens over white LED Surface mount on trailer - hardware included Molded 3-prong plug provides a watertight connection DOT compliant Specs: Configuration: driver side Passenger side: STL0066RBG (sold separately) Dimensions: 7-3/4" long x 3-1/8" tall x 2-7/8" deep Total diodes: 6 Tail: 1 Turn signal: 2 License light: 3 Power draw at 12.8V: Stop: 0.154 amps Tail/turn: 0.060 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... These fenders are made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirts help contain road debris.Features: Round fenders cover 2 tires on your single-axle trailer Act as splash guards to keep road debris from hitting other vehicles and to help protect your trailer's cargo 3 Steps per fender - 2 on each side and 1 on top - let you easily climb into and out of your trailer Molded-in treads offer secure footing Built-in skirts provide extra protection Durable polypropylene is corrosion-proof Black color is molded into the plastic so it won't scratch or wear off Bolt-on installation Fenders attach to your trailer's existing brackets - requires drilling Mounting hardware sold separately Made in the USA Specs: Application: single-axle trailers with 14" diameter wheels Dimensions: 43-1/8" long x 11" wide x 12-1/2" tall Skirt height: 11-1/2" Step dimensions: Side steps: 6-1/2" long x 10-1/2" wide Top step: 6-1/2" long x 9" wide Weight capacity: 300 lbs per fender Weight: 5.75 lbs per fender Quantity: 2 fenders Durable Polypropylene Construction Polypropylene trailer fenders are durable and lightweight alternatives to steel and aluminum fenders.
... These fenders are made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirts help contain road debris.Features: Round fenders cover 2 tires on your single-axle trailer Act as splash guards to keep road debris from hitting other vehicles and to help protect your trailer's cargo 3 Steps per fender - 2 on each side and 1 on top - let you easily climb into and out of your trailer Molded-in treads offer secure footing Built-in skirts provide extra protection Durable polypropylene is corrosion-proof Black color is molded into the plastic so it won't scratch or wear off Bolt-on installation Fenders attach to your trailer's existing brackets - requires drilling Made in the USA Specs: Application: single-axle trailers with 13" diameter wheels Dimensions: 40-1/4" long x 10" wide x 11-1/4" tall Skirt height: 10-3/8" Step dimensions: Side steps: 6" long x 9-1/2" wide Top step: 6" long x 8" wide Weight capacity: 300 lbs per fender Weight: 4.36 lbs per fender Quantity: 2 fenders Durable Polypropylene Construction Polypropylene trailer fenders are durable and lightweight alternatives to steel and aluminum fenders.
6-1/16" x 3-5/8" Rectangle. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. Mounts on surface of trailer - hardware included. 3-Wire pigtail.Features: Rectangular trailer tail light serves 7 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear reflex reflector, and license plate light Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Plastic housing Red and clear acrylic lenses Mounts on surface of trailer Hardware slides along rear channels so that you can adjust the position of the light Stainless steel hardware included 3-Wire pigtail White wire is for ground Brown wire is for the tail lights Yellow wire is for the stop and turn lights DOT compliant Specs: Configuration: driver's side (left-hand side) Passenger's-side light (STL56RB) sold separately Dimensions: 6-1/16" long x 3-5/8" tall x 2-1/4" deep Mounting hole dimensions (center to center): 2" Hardware size: 1/4-20 x 1" long Diodes: 23 Power draw at 12.8 volts: Stop/turn signal light: 0.268 amps Side marker light: 0.059 amps Quantity: 1 Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.Features: Rectangular combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted Stop, tail, turn, side marker, side reflex, rear clearance, and rear reflex Built-in license plate light on driver's-side light illuminates license plate Sealed, waterproof construction is submersible Designed for marine trailer applications Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red acrylic lens screws on and can be easily replaced Molded plastic housing Mounts on surface of trailer - stainless steel hardware included Includes license plate bracket for mounting driver's side light 3-Wire pigtail 25-Ft Wiring harness for making connections DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting P2PC rated Specs: Configuration: driver side (STL17RB) Passenger side (STL16RB) Dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Diodes: 40 Driver's-side light: 22 diodes Passenger's-side light: 18 diodes Power draw at 12.8 volts: Stop/turn signal light: 0.259 amps Tail light: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of these lights make them ideal for use on trailers that may be submerged, like a boat trailer.
... This fender is made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirt helps contain road debris.Features: Round fender covers 1 tire on your single-axle trailer Acts as a splash guard to keep road debris from hitting other vehicles and to help protect your trailer's cargo 3 Steps - 2 on each side and 1 on top - let you easily climb into and out of your trailer Molded-in treads offer secure footing Built-in skirt provides extra protection Durable polypropylene is corrosion-proof Black color is molded into the plastic so it won't scratch or wear off Bolt-on installation Fender attaches to your trailer's existing brackets - requires drilling Made in the USA Specs: Application: single-axle trailers with 14" diameter wheels Dimensions: 43-1/8" long x 11" wide x 12-1/2" tall Skirt height: 11-1/2" Step dimensions: Side steps: 6-1/2" long x 10-1/2" wide Top step: 6-1/2" long x 9" wide Weight capacity: 300 lbs Weight: 5.75 lbs Quantity: 1 fender Note: If ordering more than one fender, order part CE19504-2 to save on shipping costs.
8" x 2-7/8" Rectangle. Low-profile trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Durable plastic housing and acrylic lens. 12 LEDs. ... Features: Low-profile trailer tail light serves 6 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, and rear reflex reflector Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable plastic housing Red lens over white LEDs Mounts on surface of trailer - hardware included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: passenger's side (right-hand side) Driver's-side light (STL15RB) sold separately Dimensions: 8" long x 2-7/8" tall x 2-13/16" deep Diodes: 12 Power draw at 12.8 volts: Stop/turn signal light: 0.252 amps Tail light: 0.135 amps Quantity: 1 Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4" x 2" Rectangle. Trailer light serves as either a clearance or side marker light. Built-in reflex reflector. Durable black ABS plastic base. Surface mount to trailer - hardware not included. 2-Wire pigtail. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
4-1/2" x 5" Square. Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, side reflex, and license plate light. SMD LEDs for enhanced performance. ... Features: Square LED combination trailer tail light serves 7 functions Stop light, turn signal, tail light, rear reflector, side marker, and side reflector License plate light illuminates your trailers license plate Built-in reflex reflector removes the need for a separate reflector Sealed, waterproof construction is submersible Durable SMD construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing with acrylic lens Red lens over white LEDs Compatible with 12V DC electrical systems Stud mount - hardware included 3-Wire design hardwires to trailer DOT compliant Specs: Configuration: driver side Passenger side: STL38RB (sold separately) Dimensions: 4-1/2" tall x 5" wide x 2-1/2" thick Distance between mounting studs (center on center): 2" Diodes: 10 Power draw at 12.8V Stop/turn: 0.19 amps Marker: 0.065 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
6-1/8" x 4-9/16" Square. Waterproof LED tail light acts as brake, tail, turn, side marker, side reflector, rear clearance, and rear reflector for trailers over 80" wide. Stud mount - includes hardware. 3-Wire design. 18 Diodes.Features: Square LED combination tail light serves 7 functions on trailers over 80" wide Stop, tail, turn, side marker, side reflector, rear clearance, and rear reflector Sonically sealed, waterproof housing and lens unit is submersible Built-in reflector removes the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable plastic housing Red acrylic screw-on lens Compatible with 12V DC systems Stud mounts to trailer with included studs 3-Wire design hardwires to trailer DOT compliant Specs: Configuration: passenger side Driver side: STL3RB (sold separately) Dimensions: 6-1/8" long x 4-9/16" tall x 2-7/8" thick Distance between mounting studs (center on center): 2" Diodes: 18 Power draw at 12.8V: Stop/turn: 0.268 amps Marker: 0.059 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... This fender is made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirt helps contain road debris.Features: Round fender covers 1 tire on your single-axle trailer Acts as a splash guard to keep road debris from hitting other vehicles and to help protect your trailer's cargo 3 Steps - 2 on each side and 1 on top - let you easily climb into and out of your trailer Molded-in treads offer secure footing Built-in skirt provides extra protection Durable polypropylene is corrosion-proof Black color is molded into the plastic so it won't scratch or wear off Bolt-on installation Fender attaches to your trailer's existing brackets - requires drilling Made in the USA Specs: Application: single-axle trailers with 13" diameter wheels Dimensions: 40-1/4" long x 10" wide x 11-1/4" tall Skirt height: 10-3/8" Step dimensions: Side steps: 6" long x 9-1/2" wide Top step: 6" long x 8" wide Weight capacity: 300 lbs Weight: 4.36 lbs Quantity: 1 fender Note: If ordering more than one fender, order part CE19503-2 to save on shipping costs.
4" x 2" Rectangle. Trailer light serves as either a clearance or side marker light. Built-in reflex reflector. Durable black ABS plastic base. Surface mount to trailer - hardware not included. 2-Wire pigtail. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
3-3/4" x 1-13/16" Oval. Low-profile trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount - hardware not included. 2-Wire design. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
8" x 2-7/8" Rectangle. Low-profile trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. Durable plastic housing and acrylic lens. ... Features: Low-profile trailer tail light serves 7 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear reflex reflector, and license plate light Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable plastic housing Red lens over white LEDs Mounts on surface of trailer - hardware included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: driver's side (left-hand side) Passenger's-side light (STL14RB) sold separately Dimensions: 8" long x 2-7/8" tall x 2-13/16" deep Diodes: 18 Power draw at 12.8 volts: Stop/turn signal light: 0.252 amps Tail light: 0.135 amps Quantity: 1 Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Filters
