This kit provides a 7-pole, RV-style trailer connector, wiring harness and mountingbracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.Features: Replacement 7-pole, sealed socket, RV-style trailer connector with pigtail and mountingbracket High-impact nylon construction Resists corrosion 4' Long wiring harness Hard-wires into vehicle wiring system Has 1/2" convoluted tubing Forms weathertight seal on back of socket Keeps out moisture Prevents corrosion Includes color-coded, 7-wire leads that meet RVI standards Right-angle mountingbracket Convenient mount under rear bumper of truck or SUV Zinc-plated construction Black, epoxy coating Protects against rust and corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents leaks when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 12 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. ... Once you've installed the mountingbracket, take the dust cap off the connector. Slide the connector into the mountingbracket until you feel it click into place. Pop the dust cap back on, and you're good to go.
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.Features: 7- and 4-Pole trailer connector with mountingbracket Has high-impact, ABS plastic construction Stainless steel spring for easy cover operation Rubber gasket provides weather-resistant design Includes mountingbracket for easy, snap-in socket installation Black, epoxy-coated steel construction Mounts to bumper with included screws Specs: Application: Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs Can be used to add a connector to 2003 and newer GM pickups and SUVs Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year limited warranty Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Establish a secure connection between your trailer and semi or other tow vehicle with this heavy-duty, 7-pole RV blade-style socket and mountingbracket.Features: Heavy-duty, 7-pole, RV blade-style socket connects tow vehicle to trailer Zinc, die-cast housing for durability Maximum amperage: 35 Includes mountingbracket and hardware 12-704 Pollak RV 7-Blade Plug End Socket with Bracket
Attach your trailer connector mountingbracket to your vehicle without having to drill. Just affix this sturdy steel bracket to your trailer hitch with the included hose clamp, and then quickly and easily bolt on your connector bracket.Features: Attaches to trailer hitch to provide mounting point for 6-pole round or 7-pole round trailer connector bracket (sold separately) Provides space necessary to mount large trailer connector Offers a no-drill solution for mounting your trailer connector bracket Installs with included hose clamp Wrap strap around trailer hitch and through attachment bracket Tighten down for sturdy mounting Constructed of durable steel Resists corrosion with black powder coat Includes hardware for affixing trailer connector bracket Measures 3" wide x 6-1/2" long Limited lifetime warranty Specs: Overall dimensions: 3" wide x 6-5/8" tall x 7/8" deep Diameter of mounting hole: 1" x 1-5/8" Strap length: 14" This will fit around a hitch tube up to 3-1/2" in diameter
Attach your trailer connector mountingbracket to your vehicle without having to drill. Just affix this sturdy steel bracket to your trailer hitch with the included hose clamp, and then quickly and easily bolt on your connector bracket.Features: Attaches to your trailer hitch to provide mounting point for a 4-, 5- or 6-way trailer connector bracket (sold separately) Offers a no-drill solution for mounting your trailer connector bracket Installs with included hose clamp Wrap strap around trailer hitch and through attachment bracket Tighten down for sturdy mounting Constructed of durable steel Resists corrosion with black powder coat Specs: Dimensions: 3" wide x 3-7/8" long 1-Year limited warranty
This universal, right-angle bracket is designed for mounting the Pollak 7- and 9-pole trailer connectors to your towing vehicle. Black, zinc-plated bracketmounts under rear bumper of truck or SUV. ... Features: Right-angle mountingbracket Convenient mount under rear bumper of truck or SUV Zinc-plated construction Black, epoxy coating protects against rust and corrosion For a no-drill installation, additional mountingbrackets can be used that clamp to the trailer hitch and bolt to this bracket Includes hardware to mountbracket to vehicle and wiring harness to bracket Specs: Application: PK11893, PK12703, PK12707 or PK12907 Overall dimensions: 3" wide x 3-13/16" tall x 1-3/8" deep Diameter of mounting hole: 2-3/16" 1-Year limited warranty
Bracket for 4-way flat trailer connector mounts to your trailer hitch or vehicle bumper and provides a sturdy, fixed location to easily connect your trailer wiring.Features: Bracketmounts to your trailer hitch or bumper to provide a sturdy location to hold your 4-pole flat trailer wiring connector Hardware not included Black color Specs: Opening dimensions: 1-5/16" long x 1/2" tall Distance between mounting holes: 1-3/4"
Attach your trailer connector mountingbracket to your vehicle. Simply bolt this sturdy steel bracket to your trailer hitch, bumper, or vehicle's frame. ... Features: Attaches to trailer hitch to provide mounting point for 4-, 5-, or 6-pole round trailer connector Provides space necessary to mount large trailer connector Installs directly to your hitch, bumper, or vehicle's frame Works with no-drill mountingbrackets (18136 or 18140) for even easier, reversible installation Durable steel construction Black powder coat finish resists corrosion 1-Year limited warranty Specs: Overall dimensions: 3-1/2" wide x 2-3/8" tall x 1-1/4" deep Diameter of mounting hole: 1-1/4"
Mount your EZ Connector socket or standard 7-way vehicle-end connector with this mountingbracket. Heavy-duty aluminum is durable. Includes mounting screws.Features: Electrical bracket lets you mount your trailer connector on your vehicle quickly and easily Compatible with EZ Connector socket or standard 7-way connector Heavy-duty aluminum construction 4 Stainless steel mounting screws included Made in the USA Specs: Overall dimensions: 3-3/8" wide x 4-1/4" tall x 1-5/8" deep Diameter of mounting hole: 2-1/8"
Sturdy steel bracket lets you mount a 5-way flat trailer connector on your vehicle. Hardware included.Features: Securely mounts a 5-way flat trailer connector Allows for attachment to the vehicle or trailer hitch Constructed of sturdy steel Resists corrosion with durable black powder coat Includes mounting hardware 1-Year limited warranty Specs: Overall dimensions: 2-1/4" wide x 1-3/4" tall x 1-1/4" deep Diameter of mounting hole: 1-5/8"
This mountingbracket for 7-way connectors secures your trailer wiring up and out of the way. Made of plated steel.Plated steel construction: Provides rust resistance for long-term prrotection. Easy install: Just mount it with screws.
Replaces the mountingbracket for your Curt Discovery trailer brake controller (C51120). Spare bracket also allows use of the same controller in multiple vehicles.Features: Securely mounts Curt Discovery trailer brake controller (C51120 - sold separately) Controller can be mounted anywhere in the vehicle, at any angle Slotted screw holes allow for flexible mounting options Spare bracket allows use of the same controller in multiple vehicles Includes 4 mounting screws
Magnetic mountingbracket secures your 7-pole or 6-pole socket to your trailer hitch. Simple installation requires no drilling. Strong magnet keeps bracket tightly attached to your hitch. ... Features: Mountingbracket lets you secure your 7-pole or 6-pole connector (sold separately) to your vehicle's hitch Rare earth magnet keeps bracket firmly attached to your hitch Install bracket in seconds - no drilling required Remove or reconnect to your hitch without hassle Low-profile design - no unsightly mounting tabs hanging off your hitch Built-in slot makes it easy to mount pre-wired connectors Just slip the wires through the slot when you mount the connector High-impact aerospace aluminum construction resists damage Powder coat finish is durable and corrosion resistant Made in the USA Limited lifetime warranty Specs: Overall dimensions: 3-1/4" wide x 4-5/8" tall Diameter of mounting hole: 2"
Magnetic mountingbracket holds up your 4-pole flat trailer connector to prevent your plug from dragging on the ground. Strong magnet keeps bracket tightly attached to your hitch. ... Features: Mountingbracket lets you secure your 4-pole flat trailer connector (sold separately) to your vehicle's hitch Lifts plug up off the ground to prevent it from dragging while you're not towing Rare earth magnet keeps bracket firmly attached to your hitch Install bracket in seconds - no drilling required Remove or reconnect to your hitch without hassle Low-profile design - no unsightly mounting tabs hanging off your hitch Heavy-duty composite material is corrosion free Made in the USA Specs: Dimensions: 2-1/2" tall x 1-7/8" wide x 1/2" thick Limited lifetime warranty
This replacement mountingbracket is designed for use with your Curt Venturer trailer brake controller (C51110 - sold separately). Replace a damaged bracket or mount in a different vehicle to make it easy to move the controller. ... Features: Replaces damaged mountingbracket for your Curt Venturer trailer brake controller (C51110 - sold separately) Can also be installed in different tow vehicle so you can easily transfer controller Includes hardware
Attach your trailer connector mountingbracket to your vehicle. Simply bolt this sturdy steel bracket to your trailer hitch, bumper, or vehicle's frame. ... Features: Attaches to trailer hitch to provide mounting point for 4-Way flat trailer connector Provides space necessary to mount large trailer connector Installs directly to your hitch, bumper, or vehicle's frame Works with no-drill mountingbrackets (18136 or 18140) for even easier, reversible installation Installation hardware is not included Durable steel construction Black powder coat finish resists corrosion 1-Year limited warranty Specs: Overall dimensions: 2-1/4" wide x 1-3/4" tall x 1-1/4" deep Diameter of mounting hole: 1-5/16"
Easily connect either a 7-way or 4-way trailer-end connector with this dual-outlet socket. Simply plug this into your vehicle's OEM USCAR wiring system and mount it with the included bracket.Features: Provides a 4-way and 7-way socket for your trailer connector Fits USCAR-equipped vehicles with factory tow plugs 4-Way flat output connects tail lights, brake lights and turn signals 7-Way RV blade socket adds reverse lights, electric brakes and auxiliary power Rubber gasket keeps moisture and debris out Spring-loaded dust covers keep connectors clean when not in use Pre-greased terminals offer a reliable connection Mountingbracket lets you attach socket to your hitch or bumper High-strength steel has durable, gloss black powder coat Mounting screws included 1-Year limited warranty
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. ... Features: Electrical bracket lets you mount your trailer connectors to your hitch quickly and easily Holds (1) 6-way or 7-way round connector and (1) 4-way or 5-way flat connector Fits 2" x 2" trailer hitch receivers Sturdy steel construction is long-lasting Black powder coat finish resists corrosion Notched design allows for access to pin and clip or hitch lock Fast, simple, no-drill installation Fit bracket over hitch receiver opening and secure around lip with included hardware Dimensions: 10" long x 3-1/4" tall Edge is 1-5/32" at widest point Specs: Overall dimensions: 10-1/2" wide x 3-1/4" tall x 1-1/8" deep Diameter of mounting hole: 2-1/16"
Attach this electrical bracket to your 2-1/2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. ... Features: Electrical bracket lets you mount your trailer connectors to your hitch quickly and easily Holds (1) 6-way or 7-way round connector and (1) 4-way or 5-way flat connector Fits 2-1/2" x 2-1/2" trailer hitch receivers Sturdy steel construction is long-lasting Black powder coat finish resists corrosion Notched design allows for access to pin and clip or hitch lock Fast, simple, no-drill installation Fit bracket over hitch receiver opening and secure around lip with included hardware Specs: Overall dimensions: 10-5/8" wide x 3-3/4" tall x 1-1/8" deep Diameter of mounting hole: 2-1/16"
Attach this electrical bracket to your 1-1/4" trailer hitch to make mounting your trailer connector (sold separately) fast and easy. Use with either a 4-way or 5-way flat connector. ... Features: Electrical bracket lets you mount your trailer connector to your hitch quickly and easily Holds (1) 4-way or 5-way flat connector Fits 1-1/4" x 1-1/4" trailer hitch receivers Sturdy steel construction is long-lasting Black powder coat finish resists corrosion Notched design allows for access to pin and clip or hitch lock Fast, simple, no-drill installation Fit bracket over hitch receiver opening and secure around lip with included hardware Specs: Overall dimensions: 5-1/4" wide x 2-7/16" tall x 1" deep Diameter of mounting hole: 1-3/4"
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connector (sold separately) fast and easy. Use with either a 4-way or 5-way flat connector. ... Features: Electrical bracket lets you mount your trailer connector to your hitch quickly and easily Holds (1) 4-way or 5-way flat connector Fits 2" x 2" trailer hitch receivers Sturdy steel construction is long-lasting Black powder coat finish resists corrosion Notched design allows for access to pin and clip or hitch lock Fast, simple, no-drill installation Fit bracket over hitch receiver opening and secure around lip with included hardware Specs: Overall dimensions: 6-1/8" wide x 3-1/4" tall x 1-1/8" deep Diameter of mounting hole: 1-3/4"
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals. O-ring on lid makes a watertight seal.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Designed for use with an existing factory tow package Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring on lid creates a watertight seal when lid is closed to keep out moisture and debris Marine-grade wiring resists water damage Spring-loaded, self-closing lid automatically covers connector Connector fits into factory socket mounting location on most newer vehicles Adapter brackets or standard mountingbracket (sold separately) also available Made in the USA Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
... This bracket fixes that. Mount it once, snap the plug in, and it stays put.Durable Steel: Powder-coated to resist rust and corrosion. Standard Fit: Compatible with most 7-way trailer sockets. Features to know about Lock Down Your 7-Way Plug This TowSmart mountingbracket gives your 7-way trailer plug a permanent home near your hitch.
Filters
