Make your signals pop in traffic with a rugged 6-1/2" oval stop, tail, and turn light - bright all-red output, sealed against dust and water, and a quick grommet mount with Tri-Pole hookup for fast, reliable installs.
Replaces the red side marker lens for your Optronics ST16, STL16, ST17, or STL17 Series combination trailer tail lights. Works with ST16RB, STL16RB, ST17RB, STL17RB, TL16RK, TLL160RK, or TLL16RK. Constructed of durable acrylic.
You're hooking up at dusk and want a quick check. This adapter lights when your taillights come on and lets you plug from 7 Blade to 5 or 4 Flat with no rewiring.Plug-In Setup: No rewiring required. LED Indicator: Lights when taillights are on. Core Signals: Brake, turn, taillight, reverse, and ground. Quick Hookups: Fast connection for mixed trailer plugs.
You're lining up the trailer in the driveway when you realize the plug doesn't match. No time to rewire. You grab the adapter, plug it in, and the lights fire up. Quick fix, solid connection, and you're back on schedule.Plug-In Ready: No cutting or splicing needed. Lighting Functions: Connects taillights, brake lights, turn signals, and reverse lights. Weather-Resistant Housing: Helps protect against moisture and road grime. Compact Design: Easy to store when not in use.
Kelly you're spot on, thanks for reaching out! Since you mentioned you have “the bar that the Falcon 2 hooks to” that tells me your current setup on the Geo Metro is using a Roadmaster crossbar-style base plate. I checked fitment for both…
The exact LED replacements from Command Electronics were the following: - Driver Side 328-003-81LBM1 - Passenger Side 328-003-81BM1 But they have since been discontinued, so I recommend using the following from Optronics, although it does mean…
There is always a way to make it work. I can't recommend doing that as I have not tested it and I do not offer a product like that with the exception of the Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00. This will give you a…
On your 2014 Ford E350 Van with the factory towing package the brake controller port should be located behind the center of the dash above the stereo. You will need to remove the center panel above the stereo and to the left. Once it is removed there…
Hitches actually work great as jacking points generally as they are reinforced steel beams that attach directly to the vehicle frame. I wouldn't think twice about using a hitch installed on your 2018 Toyota RAV4 like the EcoHitch #306-X7219 you…
The big differences between a Class IV and a Class V hitch are the capacities and the opening size. Class IV is going to be a 2 inch hitch opening that has tongue weights typically up to 1,200 lbs and total trailer weight of 12,000 lbs. For a Class V…
Hey Tom. The highest capacity drum brake assemblies we have for a 4 bolt brake flange are the Dexter Electric Trailer Brakes item #23-105-106-09. These are a 6,000 lbs set that are mainly used with AL-KO/Hayes axles. Do you have any part numbers or…
Although the DOT numbers you gave me are codes for what testing was done on the lights, I do have a solution for you. For your 2-1/2" round clearance light we have the Peterson Piranha LED Light #162R with the wiring and grommet as part…
Hey Dan, Congrats on the brand new motorhome! For your 2023 Ford F-150, I’d start with the etrailer Invisible Base Plate Kit, part #e86YR. This is a really nice option because it keeps the front of your truck looking clean when you’re not towing. The…
It is perfectly acceptable to use the B&W Turnover ball Gooseneck hitch #BW77FR, and the #BWGNXA4085 offset ball be used with an Andersen Ultimate 5th wheel Connection. The Andersen hitch adapter provides about 8 inches of offset, plus the 4…
It looks like the closest we have to those measurements is the Replacement Support Arm Assembly for Solera Pitched RV Awnings LC260294 which measures 66 1/8" long. Just to be clear, you will need to measure the wall mount from the top to the…
I took a look at the Bargman Door Latch 10-30-051 that you referenced and it is indeed oversized. The best option we have to replace this would be the Global Link RV Entry Door Locking Latch Kit part #295-000019 which can install in an opening up to…
The trailer has been sitting all winter. On the first warm weekend, you go to hook up and the plug falls apart in your hand. You've got one shot to fix it before hitting the road. Splice in this 4-way, test the lights, and you're good to go.Specs Connector Type: Type: 4-way flat End: Trailer (plug and lead) Functionality: Lighting supported: taillights, brake lights, turn signals Construction: Material: Plastic Weather resistance: Yes Warranty: 1-Year limited
You're getting ready to tow a trailer with a 4-way flat plug, but your vehicle has a 7-way blade socket. Instead of rewiring, you grab this adapter, plug it in, test the lights, and you're ready to roll.Plug-In Ready: No cutting or splicing needed. Lighting Functions: Connects taillights, brake lights, turn signals, and reverse lights. Weather-Resistant Housing: Helps protect against moisture and road grime. Compact Design: Easy to store when not in use.
... This 4-way flat connector gives you what you need: solid connections for stop, turn, and taillights. No guesswork. Just splice, test, and tow.Highlights Quick-Connect Wiring: 4-way flat connector with 48" of bonded wire. Essential Lighting Functions: Supports stop, turn, and taillights. Plug-and-Go Setup: Includes LED tester and splice connectors. Weather-Resistant Housing: Helps protect against moisture and road grime.
The trailer lights are flickering again. You've replaced bulbs, checked grounds, and still no luck. Time to swap the plug. This 4-way flat connector comes with a built-in tester and 24 inches of bonded wire. Splice it in, test the lights, and go.Highlights 4-Way Flat Plug: Standard trailer-end connector. 24" Bonded Wire Lead: 18-gauge wire for stop, turn, and taillights. Built-In Wire Tester: Lets you verify light function during install. Protective Cover: Helps keep connector terminals clean when not in use.
You're rewiring an old trailer and want to do it right. This 25-foot Y-harness lays in smooth, splitting left and right so you don't need jumper wires. Splice it in, test it, and you are ready to go.Specs Connector Type: Type: 4-way flat End: trailer end connector Functionality: Supports: taillights, brake lights, turn signals Construction: Cable length: Turn signal and taillight wires: 25 feet Ground wire: 24 inches Housing material: Weather resistance: Sealed design helps block moisture and grime Warranty: 1-Year limited
Convert your vehicle's 4-way flat connection to a 7-way RV socket with this adapter harness. It supports lighting, trailer brakes, reverse lights, and auxiliary power, all in a compact 12" harness.Features: 4-Way flat to 7-way RV socket adapter harness designed for trailer wiring connections Supports taillights, brake lights, reverse lights, turn signals, trailer brakes, and auxiliary power 12" Harness length for convenient installation Spring-loaded dust cover helps protect connector from dust and corrosion Designed for reliable trailer electrical connections
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points in rear cargo area Plug in T-connector Run hot lead to car battery Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear cargo area. You will have to remove the taillights to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
You're rewiring a trailer from scratch or cleaning up a mess of splices. This 7-way gives you a fresh cable, sealed jacket, and built-in test lights. You wire it once, plug it in, and know its good. All that's left is to head out.Specs Connector Type: Type: 7-way RV-style blade (trailer end) Cable Lengths: Trailer lead: 72" long Functionality: Supports: taillights, brake lights, turn signals, electric brakes, reverse, battery charge, auxiliary power LEDs: light up to confirm active signals Construction: Wiring: jacketed 7-conductor cable Terminals: blunt-cut leads Housing: plastic with integrated LED test lights Warranty: 1-Year limited
You're set up with a 4-way, but your buddy's trailer has a 7-way plug. Instead of rewiring your rig, you snap this adapter into place and keep moving. It gives you both 4-flat and 7-way outputs, ready for whatever pulls into the driveway.Specs Adapter Type: Converts: 4-way flat vehicle wiring to 7-way blade and 4-way flat trailer connectors Functionality: Supports: taillights, brake lights, turn signals (additional circuits may require hardwiring) Construction: Material: Plastic housing Cover: Spring-loaded lid for 7-way socket Mounting: Bumper or bracket mount Warranty: 1-Year limited
You've got a 4-flat on the vehicle and a 7-way on the trailer. No time to rewire. You grab this adapter, plug it in, and the built-in lights confirm the signals are live. Now you just need to load up and hit the road.It's a plug-and-play solution for light-duty towing. The built-in LED tester confirms that brake lights, taillights, and turn signals are active. Molded grips make it easy to plug in and remove without tools. Specs Adapter Type: Converts: 4-way flat vehicle socket to 7-way RV-style blade trailer plug Functionality: Supports: basic lighting functions (brake, turn, tail) LEDs: show active signals when connected Construction: Grip: textured ergo design Housing: sealed plastic body Warranty: 1-Year limited
You're connecting a 6 Round trailer to your 7 Blade vehicle. This adapter clicks in and matches the center pin auxiliary layout so your lights and brakes work without rewiring.Plug-In Setup: No cutting or splicing required. Core Signals: Brake, turn, and taillights supported. Control and Power: Electric brake, auxiliary power, and ground.
Back up to the campsite and your signals pop - this slim 6" oval light mounts to standard holes and just works. Sealed, UV tough, and ready for rain, it keeps you visible so setup stays simple and safe.Features: Stop/Tail/Turn LED with smooth surface, low-profile face Surface-mount design fits industry-standard 6" oval applications Mount horizontal, vertical, or at any angle and remain DOT compliant Impact-resistant, UV-stable automotive-grade polycarbonate lens TecSeal urethane potting protects the circuit board IP68 hermetic seal - dustproof and waterproof Meets FMVSS 108 requirements for wide and narrow vehicles Rated for reliable performance over 100,000 hours Wiring pigtail included Fits standard mounting holes Specs: Dimensions (surface mount): 7-9/16" L x 3-5/16" W x 1-1/2" D LEDs: 6 Voltage: 9-14 VDC Current (red lens): 0.17 A to 0.28 A Connector: 9" wiring pigtail Wiring: White - Ground, Red - High/Turn, Black - Low/Dim Mounting orientation: horizontal, vertical, or any angle Ingress protection: IP68 Lens material: automotive exterior lighting grade polycarbonate with UV resistance Compliance: FMVSS 108 Service life: rated over 100,000 hours Mounting pattern: fits standard 6" oval holes (surface mount) TecNiq has introduced a line of 6" oval stop and turn taillights.
Your trailer plug is cracked and corroded from years of road grime, and you don't want to mess with flickering lights or weak connections. You wire in this 7-way RV-style plug and know it's solid. Lights fire up, and you're ready to tow.Specs Connector Type: Type: 7-way blade End: Trailer (plug only) Functionality: Lighting supported: taillights, brake lights, turn signals, reverse lights Construction: Material: Plastic Weather resistance: Yes Warranty: 1-Year limited
You're halfway through loading the trailer when your buddy shouts the lights aren't working. You check the plug. Wrong connector. No time to troubleshoot. You grab the harness, plug it in, and just like that, everything lights up.Specs Connector Type: Type: 4-way flat Ends: one trailer plug, one vehicle plug Cable Lengths: Trailer end: 12" long Vehicle end: 48" long Functionality: Supports: taillights, brake lights, turn signals Construction: Material: molded plastic housing Weather resistance: helps block moisture and grime Warranty: 1-Year limited
You're lining up the trailer in the driveway when you realize the plug doesn't match. No time to rewire. You grab the adapter, snap it into place, and the lights fire up. Quick fix, solid connection, and you're back on schedule.Specs Adapter Type: Converts: 7-way blade (vehicle) to 4-way flat (trailer) Functionality: Supports taillights, brake lights, and turn signals Construction: Material: Plastic housing Weather resistance: Sealed to block moisture and grime Warranty: 1-Year limited
Back up to the campsite and your signals pop - this slim 6" oval light mounts to standard holes and just works. Sealed, UV tough, and ready for rain, it keeps you visible so setup stays simple and safe.Features: Stop/Tail/Turn LED with smooth surface, low-profile face Surface-mount design fits industry-standard 6" oval applications Mount horizontal, vertical, or at any angle and remain DOT compliant Impact-resistant, UV-stable automotive-grade polycarbonate lens TecSeal urethane potting protects the circuit board IP68 hermetic seal - dustproof and waterproof Meets FMVSS 108 requirements for wide and narrow vehicles Rated for reliable performance over 100,000 hours Tri-Pole connector; fits standard mounting holes Specs: Dimensions (surface mount): 7-9/16" long x 3-5/16" wide x 1-1/2" deep LEDs: 6 Voltage: 9-14 VDC Current (red lens): 0.17 A to 0.28 A Connector: Tri-Pole Wiring: White - Ground, Red - High/Turn, Black - Low/Dim Mounting orientation: horizontal, vertical, or any angle Ingress protection: IP68 Lens material: automotive exterior lighting grade polycarbonate with UV resistance Compliance: FMVSS 108 Service life: rated over 100,000 hours Mounting pattern: fits standard 6" oval holes (surface mount) Lifetime warranty TecNiq has introduced a line of 6" oval stop and turn taillights that can be mounted at any angle for DOT compliance.
LED lighting redefined sleek, IP68 sealed, rugged, lifetime warrantied fixtures for work trucks, emergency vehicles, marine use, trailers and more.TecNiq has introduced a line of 6" oval stop and turn taillights. Features: Powered by 6 high efficiency LEDs Frosted acrylic lens for even light distribution Parallel mounting clips sold separately Specs: Measurements: 6-1/2" x 2/1/4" x1-1/2" LEDs: 6 Color: Red Lens Voltage: 9 to 14 volts DC Mounting: Fits standard mounting holes Wiring: Tripole
Filters
