... lens. Surfacemount. 2-Wire pigtail. bulbs to replace - no brittle filaments Durable die-cast aluminum housing and polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surfacemount - hardware included 2-Wire pigtail
7-1/8" Incandescent transit light acts as a brake and tail light. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal ... Features: Round stop/tail light Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surfacemount - hardware not included Power lead and
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts to the surface of the trailer ... White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires into
This GloLight transit tail light is bright, easy to see, and just looks cool. It seals out moisture with the weathertight gasket. Mounts on the surface of your vehicle with screws (not included ... creates weathertight seal Built-in reflex reflector White LEDs with red lens More efficient and durable than incandescent bulbs Durable polycarbonate housing and acrylic lens Surfacemount Hardware not
6-1/2" x 2-3/8" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. Surface ... power and ground. And the plug covers the unused third point on the connection to seal it against dirt and moisture. Surface-MountLightSurface-mount trailer lights install using a flange or bracket with
5-3/8" Waterproof light with built-in rear reflex reflector displays brake, tail, and turn signals on your trailer. Mounts on the surface of the trailer and hardwires with the 3-wire pigtail ... Polycarbonate base with acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail harness hardwires to the trailer White wire for ground Brown wire for tail lights Red wire for stop and
8-11/16" Low-profile, LED tail light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome, with a lens that snaps on so it's ... Features: Low-profile rectangular RV brake, turn, and tail light White LEDs with red lens More efficient and durable than incandescent bulbs Black ABS plastic base and snap-on lens Surfacemount
18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Designed for refrigerated trucks and trailers. Durable polycarbonate housing and lens. Surface ... Features: Low-profile dome light provides bright white light for refrigerated trucks and trailers Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. Hardwires ... Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout. Use the built-in flange with mounting holes to secure the light. You can
8-5/8" Incandescent RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the RV, with a lens that snaps on so it's easy to replace the bulb. It ... Features: Rectangular RV brake, turn, and tail light Incandescent bulb Red acrylic snap-on lens Easy to replace the bulb when needed Black ABS plastic base Surfacemount Hardware not included 3-Wire
2-5/16" x 2-5/16". LED security light illuminates your RV's exterior with what white light to deter unwanted guests. Surfacemount - hardware not included. 2-Wire pigtail. systems Mounts on surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire Specs: Dimensions: 2-5/16" long x 2-5/16" tall x 7/16" deep Light type: warm
8-5/8" LED light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome and has a replaceable lens. It wires to your RV with the ... plastic base and replaceable acrylic lens Surfacemount with bracket (sold separately) Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal
11" Weatherproof light displays brake, tail, and turn signals on your trailer. Built-in reflector increases light output. Mounts on the surface of your trailer and hardwires with the included ... red lens More efficient and durable than incandescent bulbs Weatherproof polycarbonate lens and housing Surfacemount to trailer Hardware not included 6-Wire pigtail harness hardwires to trailer DOT and
7-1/2" Waterproof light with a built-in reflex reflector displays brake, tail, and turn signals on you trailer. The reflector doubles as a flange for mounting. Wires to your trailer with the ... design is super efficient Polycarbonate base and acrylic lens Surfacemount with built-in flange Hardware not included Can be mounted horizontally or vertically 3-Wire pigtail White wire for ground Brown
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Warm white LEDs are more energy efficient, last longer, and burn brighter than incandescents. The light ... drain your battery, overload your circuits, or produce too much heat. Surface-Mount, Bolt-On Installation is Easy This surface-mount puck light is incredibly easy to install as an upgrade or direct
5-5/8" Waterproof LED light displays brake, tail, and turn signals on your trailer. It mounts to the surface of your trailer with the built-in flange that doubles as a reflector and hardwires ... with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer FMVSS
7-1/4" x 2-1/4" Oval. LED utility light illuminates your trailer or RV's exterior at a downward angle. Durable polycarbonate base and screw-on lens. Surfacemount - hardware not ... LEDs Compatible with 12V DC systems Mounts on surface of trailer - no cutouts required Hardware not included for lens mounting or light installation 2-Wire pigtail includes power lead and ground wire
18" Low-profile, LED tail light displays brake, tail, and turn signals on your RV that's over 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail ... Features: Low-profile RV brake, turn, and tail light Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Mounts on surface of
7-9/16" LED turn and parking light is waterproof, and mounts to the surface of your trailer with the built-in flange so you don't need to cut a hole in your trailer. Hardwires with the ... Diodes: 10 Power draw at 12.8 volts: Turn signal light: 0.243 amps Parking light: 0.046 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat
5-15/16" Low-profile RV light displays brake, tail, and turn signals on the passenger side. It mounts on the surface of your motorhome and hardwires to the RV with the 3-wire pigtail. incandescent bulbs ABS plastic base with acrylic lens Surfacemount Hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: passenger side Driver side: RVSTL11 (sold
8-5/8" Incandescent RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the RV, with a lens that snaps on so it's easy to replace the bulb. It ... Features: Rectangular RV brake, turn, and tail light Incandescent bulb Red acrylic snap-on lens Easy to replace the bulb when needed Polycarbonate housing with white ABS plastic base Surfacemount
Oval LED security light illuminates your RV's exterior with bright light to deter unwanted guests. Durable black polycarbonate base and polycarbonate lens. Surfacemount - hardware not included ... 1-1/2" deep Diodes: 39 Wire length: 5" 1-Year limited warranty Surface-Mount RV Dome LightSurface-mount RV dome lights install using pre-drilled mounting holes in the housing. These lights lay flat
8-5/8" RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the motorhome and wires to the RV.Features: Rectangular RV brake, turn, and tail light White LED with red lens More efficient and durable than incandescent bulbs White ABS plastic base and acrylic lens Surfacemount Hardware not
9-1/8" x 8" Oval. LED security light illuminates your RV's exterior with bright light to deter unwanted guests. Durable white metal base and polycarbonate lens. Surfacemount - hardware ... ; deep Light output: 1221 lumens Diodes: 39 Wire length: 5" 1-Year limited warranty Surface-MountLightSurface-mount RV lights install using pre-drilled mounting holes in the housing. These lights
Filters
