Need a compact light with easy control and softer lighting? This LED puck light features a push button on and off switch and a frost lens for diffused illumination. It installs easily and works great for everyday lighting needs.Warm Interior Light: 3,200 K color temperature gives your RV a softer LED light tone. Surface-Mount Fit: 4-1/2" diameter works for added or replacement interior lighting. Specs Electrical: Voltage: 12V Wattage: 4.5 watts Light type: LED Light Output: Lumens: 396 Beam angle: 180 degrees Color temperature: 3,200 K Dimensions: Diameter: 4-1/2"
8-11/16" Low-profile, LED tail light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome, with a lens that snaps on so it's easy to replace the bulb. It wires to your RV.Features: Low-profile rectangular RV brake, turn, and tail light White LEDs with red lens More efficient and durable than incandescent bulbs Black ABS plastic base and snap-on lens Surfacemount Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger side Driver side: RVSTLB61 (sold separately) Light dimensions: 8-11/16" long x 3-3/16" tall x 2-1/8" thick Compatible with 12V DC systems Diodes: 9 Power draw at 12.8V: Stop/turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs
5-3/8" Waterproof light with built-in rear reflex reflector displays brake, tail, and turn signals on your trailer. Mounts on the surface of the trailer and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Built-in rear reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate base with acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail harness hardwires to the trailer White wire for ground Brown wire for tail lights Red wire for stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements Assembled in the USA Specs: Dimensions: 5-3/8" diameter x 5/8" thick Compatible with 12V DC systems Diodes: 20 Operating voltage: 9V-16V DC Wire length: 7" 1-Year limited warranty
... Designed for refrigerated trucks and trailers. Durable polycarbonate housing and lens. Surfacemount. 2-Wire pigtail. 10 DiodesFeatures: Low-profile dome light provides bright white light for refrigerated trucks and trailers Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens with white LEDs IP65 rated for dust and water resistance Compatible with 12V and 24V DC systems Surfacemount - hardware not included Included trim ring adds a finished look 2-Wire pigtail includes power lead and ground wire Specs: Quantity: 1 light Light output: Effective lumen output: 1,200 lumens Raw lumen output: 1,500 lumens Diodes: 10 Light type: daylight white Color temperature: 5,700 K Wire length: 18" Overall dimensions: 18-1/4" long x 5-3/4" tall x 1/2" thick Power draw at: 12V: 1 amp 24V: 0.6 amps Lifetime warranty on LEDs
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. Hardwires with the 3-wire pigtail.Features: Oval brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Surfacemount with built-in flange Hardware not included Optional snap-on reflector trim ring: A78RXB (sold separately) 3-Wire pigtail hardwires to trailer DOT compliant Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" thick Light dimensions: 6-1/2" tall x 2" wide Distance between mounting holes (center on center): Horizontal: 7" Vertical: 2-3/4" Compatible with 12V DC systems Diodes: 6 Power draw at 12 volts: Brake/turn: 0.161 amps Tail: 0.007 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout.
8-5/8" LED light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome and has a replaceable lens. It wires to your RV with the included pigtail harness.Features: Rectangular RV brake, turn, and tail light Glows for tail light Brightens for brake light Flashes for turn signal LED with red lens More efficient and durable than incandescent bulb ABS plastic base and replaceable acrylic lens Surfacemount with bracket (sold separately) Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger's side (right-hand side) Driver's-side light: RVSTLB0061 (sold separately) Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick Compatible with 12V DC systems Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Tail light: 0.01 amps Lifetime warranty on LEDs
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Warm white LEDs are more energy efficient, last longer, and burn brighter than incandescents. ... And because LEDs draw minimal power, the light won't drain your battery, overload your circuits, or produce too much heat. Surface-Mount, Bolt-On Installation is Easy This surface-mount puck light is incredibly easy to install as an upgrade or a direct replacement of your existing light.
11" Weatherproof light displays brake, tail, and turn signals on your trailer. Built-in reflector increases light output. Mounts on the surface of your trailer and hardwires with the included pigtail harness.Features: Rectangular brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal light Built-in reflective lens increases light output White LEDs with red lens More efficient and durable than incandescent bulbs Weatherproof polycarbonate lens and housing Surfacemount to trailer Hardware not included 6-Wire pigtail harness hardwires to trailer DOT and SAE compliant Specs: Dimensions: 11" long x 8" tall x 1-1/4" thick Diodes: 80 1-Year warranty
... Low profile LED light illuminates your RV or trailer's exterior with bright white light at a downward angle. Durable die-cast aluminum housing and polycarbonate lens. Surfacemount. 2-Wire pigtail.Features: Low-profile, exterior light provides bright white light for your RV or trailer's exterior Flood beam illuminates a wide area Light emits at 45-degree angle making it great for illuminating an outdoor area Sealed, waterproof housing and lens unit LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable die-cast aluminum housing and polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surfacemount - hardware included 2-Wire pigtail includes power lead and ground wire Specs: Overall dimensions: 4-5/16" long x 2" wide x 1-3/8" tall Distance between mounting holes (center to center): 3-11/16" Diodes: 6 Power draw at 12V: 0.82 amps Lifetime warranty on LEDs
Add a sleek and compliant red ID light to your trailer with this low-profile, surface-mount design. It installs with two screws and helps meet FMVSS 108 lighting standards.Features: Meets FMVSS 108 identification light requirements for vehicles over 80" wide Ultra-thin design (1/2" deep) minimizes protrusion for a sleek profile Clear lens with red LEDs creates bright, wide-angle illumination Vacuum-sealed and sonically-welded housing ensures lifetime protection Rugged polycarbonate lens resists impacts and UV damage TecSeal urethane potting and IP68 rating provide complete weatherproofing Durable design rated for over 100,000 hours of LED performance Flexible mounting can install horizontally, vertically, or at an angle Specs: Mounting: Surfacemount with (2) #8 screws (screw covers included) Wire lead: 9" pigtail (white ground, black +12 V power) Lens color: Clear with red LEDs Voltage: 9-14 V DC Current draw: 0.04-0.07 A Dimensions: 15-1/2" long x 1-5/16" tall x 1/2" deep Certifications: FMVSS 108, IP68 rated
18" Low-profile, LED tail light displays brake, tail, and turn signals on your RV that's over 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail harness.Features: Low-profile RV brake, turn, and tail light Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Mounts on surface of trailer Hardware not included Can be mounted in vertical or horizontal orientation 3-Wire pigtail White wire for ground Red wire for brake light Black wire for tail light DOT and SAE compliant Specs: For motorhomes that are over 80" wide Dimensions: 18" long x 1-1/2" tall x 3/4" thick Distance between mounting holes (center on center): 15-7/8" Diodes: 20 2-Year warranty
... The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts to the surface of the trailer with the built-in flange, and hardwires to trailer.Features: Halo tail light is bright and easy to see, day or night Outer band functions as tail light Center flashes for turn signal Both brightens for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires into trailer Black wire for tail light Red wire for brake and turn signal White wire for ground DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" out from trailer Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Brake/turn signal light: 0.59 amps Lifetime warranty on LEDs
12-3/4" Low-profile, LED tail light displays brake, tail, and turn signals on your RV that's under 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail harness.Features: Low-profile RV brake, turn, and tail light Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surfacemount Hardware not included Can be mounted in vertical or horizontal orientation 3-Wire pigtail White wire for ground Red wire for brake light Black wire for tail light DOT and SAE compliant Specs: For motorhomes that are under 80" wide Dimensions: 12-3/4" long x 1-1/2" tall x 3/4" thick Distance between mounting holes (center on center): 11-1/2" Diodes: 20 2-Year warranty
7-9/16" LED turn and parking light is waterproof, and mounts to the surface of your trailer with the built-in flange so you don't need to cut a hole in your trailer. Hardwires with the 3-wire pigtail.Features: Oval turn signal/parking light Brightens for parking light Flashes for turn signal Waterproof - great for boat trailers White LEDs with amber lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Overall dimensions: 7-9/16" wide x 3-5/16" tall x 3/4" thick Light dimensions: 6-1/2" tall x 2" wide Distance between mounting holes (center on center): Horizontal: 7" Vertical: 2-3/4" Compatible with 12V DC systems Diodes: 10 Power draw at 12.8 volts: Turn signal light: 0.243 amps Parking light: 0.046 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout.
Need a compact light for smaller spaces? This LED puck light provides bright, even illumination in a low-profile design. It installs easily and is a great option for adding focused lighting where you need it.Warm Interior Light: 3,200 K color temperature gives your RV a softer LED light tone. Surface-Mount Fit: Surface-mounted design works for added or replacement interior lighting. Easy Lens Access: Snap-on lens opens up the fixture for installation.
... Round, incandescent trailer light illuminates your license plate. Chrome-plated steel housing. Surfacemount with mounting ears. Single wire design grounds through the mounting hardware.Features: Light angles down to illuminate your trailer's license plate Incandescent bulb is replacable Durable, chrome-plated steel housing Clear polycarbonate lens Surfacemount to trailer Single-wire design grounds through mounting hardware Specs: Dimensions: 3-3/8" long x 2-3/8" wide x 2-3/16" deep Distance between mounting holes (center to center): 2-5/8" Required cutout diameter: 1-7/8" 3-Year warranty Note: 2 Lights are required for legal license plate illumination.
7-1/8" Incandescent transit light acts as a brake and tail light. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal against moisture.Features: Round stop/tail light Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surfacemount - hardware not included Power lead and ground wire connect to your vehicle Specs: Dimensions: 7-1/8" diameter x 2-3/16" thick Distance between mounting holes (center on center): 6-1/4" Compatible with 12V DC systems Bulb type: 1157 Power draw at 12.8 volts: Stop: 2.4 amps Tail: 0.5 amps 3-Year warranty
5-5/8" Waterproof LED light displays brake, tail, and turn signals on your trailer. It mounts to the surface of your trailer with the built-in flange that doubles as a reflector and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Built-in reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer FMVSS compliant for trailers under 80" wide Specs: Overall dimensions: 5-5/8" diameter x 3/4" thick Light face: 4" diameter Diodes: 7 Wire length: 6" Power draw at 12.8 volts: 0.033 amps Lifetime warranty on LEDs
... Toggle switch controls power. Durable polycarbonate lens and housing. Surfacemount - hardware not included. 2-Wire design.Features: Low-profile, rectangular dome light provides bright white light for your trailer's interior Built-in toggle switch controls on/off function Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution Cool white LEDs make great replacements for incandescent lights Lasts 50 times longer More efficient - provides brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lens with white LEDS Sonically sealed, waterproof housing and lens Compatible with 12V DC systems Surfacemount - hardware not included 2-Wire pigtail - includes power lead and ground wire Specs: Light output: Effective lumen output: 810 lumens Raw lumen output: 1,044 lumens Diodes: 18 Dimensions: 4-1/2" long x 2-7/8" tall x 1" thick Wiring length: 6" Power draw at 12.8V: 0.7 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-5/8" RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the motorhome and wires to the RV.Features: Rectangular RV brake, turn, and tail light White LED with red lens More efficient and durable than incandescent bulbs White ABS plastic base and acrylic lens Surfacemount Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger's side (right-hand side) Driver's-side light: RVSTL0061 (sold separately) Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Tail light: 0.01 amps Lifetime warranty on LEDs
From docking lights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 288 LEDs 144 Blue LEDs 144 White LEDs Frosted acrylic lens for even light distribution Black aluminum housing provides better heat dispersion Comes with 12" sheathed pigtail Parallel mounting clips sold separately Specs: Measurements: 48" long x 1-7/8"" tall x 5/16" deep LEDs: 288 LEDs Brightness: White / 4,720, Blue / 420 Color: White / Blue Voltage: 9 to 14 volts DC Mounting: surfacemount Wiring: 12" sheathed pigtail Lifetime warranty TecNiq packs 288 white and blue LEDs in the Slim Line surfacemount light, providing over 5,000 lumens and thousands of hours of light.
5-15/16" Low-profile RV light displays brake, tail, and turn signals on the passenger side. It mounts on the surface of your motorhome and hardwires to the RV with the 3-wire pigtail.Features: Low-profile brake, tail, and turn signal light for RVs Glows for tail light Brightens for brake light Flashes for turn signal White LEDs with red lens More efficient and durable than incandescent bulbs ABS plastic base with acrylic lens Surfacemount Hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: passenger side Driver side: RVSTL11 (sold separately) Light dimensions: 5-15/16" diameter x 1-5/16" thick Compatible with 12V DC systems Diodes: 6 Power draw at 12.8 volts: Stop/turn: 0.421 amps Tail: 0.114 amps Lifetime warranty on LEDs
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Yellow LEDs are more energy efficient, last longer, and burn brighter than incandescents. ... And because LEDs draw minimal power, the light won't drain your battery or overload your circuits. Surface-Mount, Bolt-On Installation is Easy This surface-mount puck light is incredibly easy to install as an upgrade or a direct replacement of your existing light.
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Warm white LEDs are more energy efficient, last longer, and burn brighter than incandescents. ... And because LEDs draw minimal power, the light won't drain your battery, overload your circuits, or produce too much heat. Surface-Mount, Bolt-On Installation is Easy This surface-mount puck light is incredibly easy to install as an upgrade or direct replacement of your existing light.
Filters
