... This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.And if you ever lose power, the backup crank lets you finish hooking up and move on. SnapPad Adds a Wider Footprint This kit includes a 7-3/4" octagonally-shaped SnapPad, with a 6" round inset, that permanently attaches to the jack's foot plate.
... This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.And if you ever lose power, the backup crank lets you finish hooking up and move on. SnapPad Adds a Wider Footprint This kit includes a 7-3/4" octagonally-shaped SnapPad, with a 6" round inset, that permanently attaches to the jack's foot plate.
Upgrade the strength and durability of your stabilizer jack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. Ideal for sloped or uneven surfaces.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. Includes SnapJack feet for improved stability and grip on uneven terrain.Features: Scissor jacks help level and stabilize your 5th-wheel, travel, horse, or cargo trailer Large metal feet come with pre-installed SnapPads Thicker and stronger than standard bow-tie feet Improved stability and grip on uneven terrain Added height on the SnapJack feet prevents the stabilizers from being over-extended 8-Hole top plates allow for greater adjustability during installation Includes manual crank handle and hardware to install SnapJack feet to stabilizers Added height on the SnapJack feet prevents the stabilizers from being over-extended Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Support capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks SnapJack Quantity: 2 Dimensions: 8-1/8" wide x 2-3/4" tall Weight: 3.8 lbs each Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.
Hey Judy, yes the MORryde telescoping handrail part #MR54BR that you referenced is correct fit for your 2020 Keystone Cougar 22RBS. This basically fits any RV that has fiberglass walls like what your Cougar has so it would work great.
Hey Gary, welcome back! It looks like your 2025 Forest River Flagstaff E-Pro 20FBS has the Lippert Quick Drop stabilizer jacks. You'll need the SnapPad SnapJack QD RV Stabilizer Jack Pads item #SN44VR. Your jack feet are going to be removed and…
We sure do Dustin! To add an offset gooseneck ball to the puck system on your 2024 Silverado 2500, you'll want the Gen-Y Hitch Gooseneck Trailer Hitch item #GY55XR. This 2-5/16" gooseneck ball has a 5" offset. It's going to attach…
Hey Randy! I can definitely set you up with air bags and a compressor. I recommend Firestone since they make the most durable and reliable air bags. For a complete kit with an air compressor you can choose from the following: -Firestone Ride-Rite Air…
We sure do Tyson! It's the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote item #MA00-07000K. The MaxxFan item #MA00-07000K is identical to the Smoke item #MA00-07500K you referenced. It's got a white lid that'll help deflect…
Hey Skip! You will have to measure your feet to see if the SnapPad Jack Pads #SP54FR2 are the right size for a replacement. We don't have a way of knowing what's on there now, and your motorhome isn't in the known list from SnapPad. All…
Hi Steve, great question! The bolt spread dimensions on scissor jacks aren’t universal, they can vary a bit depending on the brand and capacity. Most standard RV scissor jacks use a mounting plate that’s roughly 3-1/4" wide with bolt holes…
Hey Gary, congrats on the new trailer. For a 2" ball mount, I recommend the etrailer Adjustable 2-Ball Mount item #e66PR. This ball mount comes with both a 2" and 2-5/16" hitch ball with 7,500 lbs and 10,000 lbs capacity. It has an…
Hello Dan, thanks for reaching out. The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2706 do not have internal jounce bumpers like some of the Air Lift bags do. The #F2706 kit will fit the following vehicles: 2014 - 2025 Ram 2500 2…
Hey Ken, the Blue Ox TrackPro spring bars #BLU32FR that you referenced are 31 inches. Do you have a frame rail clearance issue where standard length bars won't fit?
Hey Ricardo, you don't have to stick with exact same style of 50 amp inlet and connector if you didn't want to. A lot of people really like the SmartPlug setup so for a 50 amp in that style we have the part #SM96FR. Due to the increased…
Yes, you should swap the weight distribution bars to the 1,000-lb Spring Bars for Blue Ox TrackPro #BLU52FR. These have a tongue weight capacity of 800-1000lbs. It is important to use the correct bars with the TrackPro since the sway control and…
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.
... This 2,000 lb swivel jack uses a drill adapter so the lift happens without the handle. It pivots up for clearance, and the SnapPad stays planted on soft ground.The jack uses a round removable foot plate for base support, and the SnapPad locks onto that foot to increase the contact area at the ground. With that added footprint in place, the jack stays planted on gravel, grass, or sand while the trailer remains supported during loading and while it sits unhitched.
... This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.The jack uses a round removable foot plate for base support, and the Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot locks onto that foot to increase the contact area at the ground. With that added footprint in place, the jack stays planted on gravel, grass, or sand while the trailer remains supported during loading and while it sits unhitched.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Corrosion-Resistant Finish: E-coat and matte black powder coat help fight rust. SnapPad Compatible Foot Plate: Works with the 6" Round SnapPad Foot (sold separately - MN6SP1). Features to know about Push-Button Lifting Power You remember all those mornings spent fighting with a manual jack, hands sore before you've even pulled out of the driveway?
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Corrosion-Resistant Finish: E-coat and black powder-coated steel help fight rust. SnapPad Compatible Foot Plate: Works with the 6" Round SnapPad Foot (sold separately - MN6SP1). Features to know about Push-Button Lifting Power You remember all those mornings spent fighting with a manual jack, hands sore before you've even pulled out of the driveway?
Your arm stalls mid-crank with a loaded tongue. Been there. This A-frame jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. You raise and lower smoothly without fighting the handle, and hitching doesn't drag on.Stable Footing on Uneven Ground: Set the jack on gravel, grass, or sand without sinking using the round removable foot plate. SnapPad Compatible Foot Plate: Works with the 6" round SnapPad (sold separately - MN6SP1) to increase ground contact. Features to know about Faster Hookups With Drill Operation Cranking a loaded trailer by hand gets old fast when you're hitching up in the driveway or at camp.
Your arm stalls mid-crank with a loaded tongue. Been there. This swivel bolt jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. It pivots up for clearance, and hitching doesn't drag on.Stable Footing on Uneven Ground: Set the jack on gravel, grass, and sand; works with a 6" SnapPad (sold separately). Features to know about Faster Hookups With Drill Operation Cranking a loaded trailer by hand gets old fast when you're hitching up in the driveway or at camp.
You pull in after a long drive, the ground looks fine, and you don't want to wonder if the jack will sink or a block will shift once everyone steps inside. This kit puts a wide drop leg and SnapPad under your jack, giving it a solid, steady base.With the drop leg and SnapPad already in place, the support you need is built into the jack, so there's nothing extra to carry, store, or line up when you arrive.
Upgrade the strength and durability of your tongue jack foot by adding this SnapPad foot. Increased surface area creates a more robust footprint compared to a standard foot. Ideal for sloped or uneven surfaces.Features: SnapPad foot improves the stability of your tongue jack (sold separately) Thicker and stronger than standard feet Omnidirectional articulation lets the foot pivot up to 10°, helping your jack stay stable on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Includes all hardware for installation Made in the USA Specs: Application: All electric, manual travel, and utility trailer tongue jacks with a 2" inner tube Dimensions: 7-3/4" diameter x 2-3/4" tall Weight: 5.4 lbs each
Perfect for Class A, B, and C motorhomes with Equalizer leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds stability on soft ground. Includes (4) pads.Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Upgrade the strength and durability of your scissor jack feet by adding this SnapJack foot. Increased surface area creates a more robust footprint compared to a standard bow-tie foot. Ideal for sloped or uneven surfaces.
Perfect for fifth wheels and motorhomes with Lippert leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Designed for travel trailers with Lippert Level Up jacks with 5-1/2" to 5-5/8" square feet.Sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Includes 4 padsRepeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Perfect for truck campers with HappiJac camper feet, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.
Designed for travel trailers with BAL leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes 4 pads.Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Perfect for motorhomes with Equalizer leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (4) pads.Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Perfect for motorhomes with Quadra BigFoot leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (4) pads.Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Filters
