These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. Includes SnapJack feet for improved stability and grip on uneven terrain.Features: Scissor jacks help level and stabilize your 5th-wheel, travel, horse, or cargo trailer Large metal feet come with pre-installed SnapPads Thicker and stronger than standard bow-tie feet Improved stability and grip on uneven terrain Added height on the SnapJack feet prevents the stabilizers from being over-extended 8-Hole top plates allow for greater adjustability during installation Includes manual crank handle and hardware to install SnapJack feet to stabilizers Added height on the SnapJack feet prevents the stabilizers from being over-extended Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Support capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks SnapJack Quantity: 2 Dimensions: 8-1/8" wide x 2-3/4" tall Weight: 3.8 lbs each Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
These leveling scissor jacks with a 10,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie bases steady the jacks on soft surfaces. Handle included.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 10,000 lbs 2,500 lbs per jack Quantity: 4 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 4 jacks Limited lifetime warranty
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. Black powder coat finish resists corrosion. Includes 2 jacks and 1 handle.
This compact, user-friendly scissor jack is a must-have to keep your RV level and stable on every journey. It adjusts from 5" to 29". Bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces 6-Hole top plate allows for adjustability when mounting Bearing set on crank side extends jack life Black e-coated finish is corrosion resistant Handle (e46VV) sold separately Specs: Lift: 24" Support capacity: 2,500 lbs Quantity: 1 jack Limited lifetime warranty
This leveling scissor jack with a 2,500-lb capacity will keep your RV level and stable. It adjusts from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces 8-Hole top plate allows for adjustability when mounting Bearing set on crank side extends jack life Black powder coated finish resists corrosion Handle (TJSC-24-HD) sold separately Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10-1/4" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" Support capacity: 2,500 lbs Quantity: 1 jack 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Take the effort out of lifting your trailer with this electric jack from Stromberg Carlson. The sleek black jack features an LED light for nighttime use, as well as water-resistant switches and a vacuum-formed cover for protection from the elements.Features: Powered jack eliminates the need for hand cranking, making jacking up your trailer a sweat-free job Water-resistant switches provide easy operation LED illuminates the area for simple nighttime setup Built-in device lets you easily see if your trailer is level Break-through handle allows you to manually operate jack if needed Easily bolts onto your trailer's A-frame - hardware included Rust-resistant, powder coated steel parts are strong and durable Jack cover is made of vacuum-formed plastic for extra protection from severe weather Zinc-plated steel footplate included Specs: Bracket height: 9" Retracted 27" Extended Lift: 18" Lift capacity: 2,500 lbs Outer tube diameter: 2" Inner tube diameter: 1-3/4" Footplate diameter: 4-1/2" Motor draws 24-25 amps under load Power wire: 10 gauge 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
... Jack swings up for storage. Black powder coat finish resists corrosion. Handle (SJ-100-HD) sold separately.Features: Stabilizing jack helps keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jack up for travel, down for use Drop leg extends so you can adjust the height Spring-loaded lever releases drop leg for use Steel handle (SJ-100-HD - sold separately) lets you easily fine-tune height adjustment Large foot provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Mounting hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Drop leg travel: 6-1/2" Lift capacity: 650 lbs Maximum load the jack can lift Support capacity: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 1 jack 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Drop-leg jack stabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the drop leg, and pin in place. Sturdy steel construction is durable.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
This socket is designed to fit into a pre-existing cutout on 2007-2013 GM 1500 trucks and 2007-2014 GM 2500/3500 trucks. Twist-in connector also serves as a replacement for OEM sockets on GM trucks 1999-2013 that came with factory tow packages.Features: Twist-in, replacement 7-pole, sealed socket, RV-style trailer connector Convenient, twist-in installation to existing socket hole on Chevy and GMC trucks High-impact nylon construction Resists corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents intrusion of moisture when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Application: fits 2007 - 2013 Chevrolet/GMC 1500 trucks and 2007 - 2014 Chevrolet/GMC 2500/3500 trucks Serves as exact replacement for 1999 to 2013 Chevy and GMC trucks with factory tow packages Current rating: 30 amps Volt rating: 12 volts 1-Year limited warranty
This jack's footplate is more stable than that caster wheel and block you're using. Premium zinc finish has a 500-hour salt spray rating - great for trailers near saltwater. Total lift includes a 13-1/2" drop leg. Made in the USA.Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting hardware Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 10-1/4" Extended: 25-1/4" Total lift: 28-1/2" Screw travel : 15" Drop leg travel : 13-1/2" Overall height (when retracted): 25-1/4" Footplate dimensions: 7" long x 4" wide 1-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
Early mornings and late nights come with the job. Whether you need long-distance visibility on the road or wide lighting for fieldwork, these hybrid LED flood/spotlights ensure clear vision wherever work takes you.Highlights Hybrid Flood/Spot Beam: Combines wide-area lighting with long-range visibility for versatile use. Bright LED Spotlights: Dual 2,500-lumen lights provide focused illumination. Durable & Weatherproof: IP67-rated aluminum housing with a shatter-resistant polycarbonate lens. 12V Compatibility: Works with trailers, trucks, tractors, and off-road vehicles.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the foot plate helps keep you steady on soft soil or gravel so you can settle in and relax.For example, if your trailer (plus gear) weighs 20,000 lbs, your tongue weight will be 2,000 - 2,500 lbs. Just make sure your jack's rated for at least that much. It's fine to go bigger as a higher-capacity jack often makes lifting easier.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces. Includes handle.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. Sidewind handle allows for an additional 15-1/2" of screw travel.Features: Utility jack lets you raise and lower your trailer 7 Height settings allow for fast, easy positioning - no blocks or drop leg needed Lower the jack from the mounting bracket to get up to 12" of lift Manually crank the jack to achieve up to an additional 15-1/2" of travel Jack retracts to be flush with bottom of trailer frame Eliminates risk of damaging hang-ups or snags while traveling Can also be entirely removed from mount to provide clearance above frame for easy access to vehicle's rear hatch Low-friction ball screw minimizes resistance to reduce wear, noise, and heat Ball bearings roll smoothly through threads of jack screw - no direct, friction-inducing contact Steel construction is durable Zinc finish resists corrosion Sidewind handle allows for simple cranking Mounting bracket can be welded or bolted on Wheel included Specs: Application: 3" x 3" or 3" x 4" trailer framers Height: Extended: 43-1/2" Retracted: 28" Total lift: 27-1/2" Travel by cranking the handle: 15-1/2" Drop tube: 12" - adjusts in increments of 2" Inner tubing diameter: 2" Outer tubing diameter: 2-1/4" Wheel diameter: 5-3/4" Lift capacity: 1,500 lbs Static capacity: 2,500 lbs 1-Year limited warranty
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Electric motor is an upgrade from manual methods Allows the lead and follow legs to work together at a faster rate Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Toggle switch will be right at home with your "current" electrical setup Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish Bolt-on installation - uses your existing mounting brackets Weld stops are located on the side facing toward your trailer frame - outside mount Hardware and additional mounting brackets are included if you need them Specs: Weight capacity: Single motor: 2,500-lbs per leg Dual motor: 5,000-lbs per leg Total lift: 34-3/4" Screw travel : 19-3/4" Drop leg travel : 15" Overall outer tube length: 33-1/2" Outer tube width: 2-1/2" Distance between weldstops: Inside to inside: 19-1/2" Outside to outside: 21-1/2" Rate of travel: 2-1/2" per minute Extendable cross shaft: Minimum: 41" Maximum: 72-3/4" 360 Watt DC motor Volts: 12 Amps: 30 Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
Features: Allows US sockets (HM40975 and PK11893) to function on Dodge Applications Fits: 1995-2010 Dodge Dakota 1995-2008 Dodge Ram 1500 1995-2009 Dodge Ram 2500/3500
2-1/2" Diameter round. Waterproof LED light functions as both a clearance light and a side marker light when properly mounted. Durable polycarbonate housing and lens. Multiple mounting options. Accepts 2-prong PL-10 plug. PC rated.
2-1/2" Diameter round. Waterproof LED light functions as both a clearance light and a side marker light when properly mounted. Durable polycarbonate housing and lens. Multiple mounting options. Accepts 2-prong PL-10 plug. PC rated.
2-1/2" Diameter round. Waterproof, incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflex reflector. Recessed mount with grommet (sold separately). Accepts standard 2-prong plug. P2 rated.
2-1/2" Diameter round. Waterproof, incandescent trailer light functions as a clearance and side marker light when properly mounted. Durable polycarbonate housing and lens. Multiple mounting options. Accepts standard 2-prong plug. PC rated.
Filters
