Heavy-duty, 2-part vent will stand up to the elements for years. Exterior vent houses a baffle that directs any intruding rainwater toward corner drain openings. ... For walls up to 1/2" thick, use machine screw 29515 (sold separately) Sealant sold separately
Vent allows air to circulate in and out of your enclosed trailer. Easily open and close with the sliding lever to adjust the airflow. Aluminum construction is durable, lightweight, and corrosion resistant.Features: Vent allows air to circulate in and out of your enclosed trailer Easy to open - just slide the lever to open and close vent Louvres direct airflow up or down depending on how the vent is mounted (4) 2" Holes in rear of unit allow air in and out Durable, rustproof aluminum front and back plates Insert is constructed of corrosion-resistant zinc-plated steel Specs: Overall dimensions: 12-1/4" long x 10-1/2" wide 2-7/8" Between mounting holes on top (center to center) 3" Between mounting holes on sides (center to center) Ventilation hole diameter: 2" Mounting hole diameter: 7/32"
RV range vent made to withstand regular kitchen use and travel conditions you face on your adventures. With a low profile design and secure latching mechanism, this vent is often chosen as an upgrade for direct replacement. ... Features: Durable, low profile plastic vent with 1-1/2" flange depth for your RV range exhaust Damper door opens easily on reinforced hinges 2 push-lock latches secure the door when closed Vent cover has sleek shape and open bottom venting area Cover and latched door are designed to withstand high wind speeds during travel Plastic rated for heat and developed not to fade, crack, or become brittle Includes mounting screws Made in the USA Specs: Dimensions Cutout: 10-3/4" long x 4" tall Outside: 12-9/16" long x 5-7/8" tall Flange depth: 1-1/2" 1- Year warranty
This 2-piece vent provides an inexpensive yet attractive way to ventilate your enclosed trailer. Round interior vent and half-moon-shape exterior piece are both constructed of black, UV-resistant polypropylene plastic that holds up to sun exposure.Features: Affordable trailer vent provides continuous ventilation for your enclosed trailer To increase ventilation, you can install more than 1 vent 2-Piece design creates a low-profile vent that's attractive both inside and outside your trailer Half-moon piece with flat, slotted side attaches to trailer's exterior Slots are on one side only, allowing you to position the vent for best airflow and to help prevent water from getting in Drain holes at the corners let out any water that does get in Round, slotted interior piece installs inside your trailer You can easily trim vent tube to fit thin walls UV-resistant, polypropylene plastic construction stands up to the elements Black color 9 Screws and sealant (sold separately) required for installation Specs: Fits 3" diameter hole in enclosed trailer Exterior half-moon dimensions: 8" long x 6" tall x 1-1/4" thick Flange width: 1/2" Interior circular piece dimensions: Diameter at flange: 4-1/8" Vent tube outside diameter: 2-15/16" Tube depth: 1-1/2" Flange width: 5/8"
This 2-piece vent provides an inexpensive yet attractive way to ventilate your enclosed trailer. Round interior vent and half-moon-shape exterior piece are both constructed of white, UV-resistant polypropylene plastic that holds up to sun exposure.Features: Affordable trailer vent provides continuous ventilation for your enclosed trailer To increase ventilation, you can install more than 1 vent 2-Piece design creates a low-profile vent that's attractive both inside and outside your trailer Half-moon piece with flat, slotted side attaches to trailer's exterior Slots are on one side only, allowing you to position the vent for best airflow and to help prevent water from getting in Drain holes at the corners let out any water that does get in Round, slotted interior piece installs inside your trailer You can easily trim vent tube to fit thin walls UV-resistant, polypropylene plastic construction stands up to the elements White color 9 Screws and sealant (sold separately) required for installation Specs: Fits 3" diameter hole in enclosed trailer Exterior half-moon dimensions: 8" long x 6" tall x 1-1/4" thick Flange width: 1/2" Interior circular piece dimensions: Diameter at flange: 4-1/8" Vent tube outside diameter: 2-15/16" Tube depth: 1-1/2" Flange width: 1/2"
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch, included.(Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.) Apply sealant to bottom of flange. Be sure to surround each screw hole. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
We recommend this sturdy plastic vent because it helps keep water out of your camper' range hood exhaust, protecting your space from moisture damage. The 1-3/4" collar ensures a secure fit, and the lockable damper adds extra peace of mind.Cut rough opening in trailer sidewall according to appliance instructions. Apply sealant (sold separately) around vent flange and insert vent into opening, ensuring that the collar overlaps the outlet flange of the appliance. Install screws to hold vent to trailer wall.
Heavy-duty plastic vent attaches to outside wall of RV or enclosed trailer to keep water out of range hood exhaust outlet. Canopy blocks out water. Damper can be locked closed. ... Cut rough opening in trailer sidewall according to appliance instructions. Apply sealant (sold separately) around vent flange and insert vent into opening, ensuring that the collar overlaps the outlet flange of the appliance. Install screws to hold vent to trailer wall.
Heavy-duty plastic vent attaches to outside wall of RV or enclosed trailer to keep water out of range hood exhaust outlet. Canopy blocks out water. Damper can be locked closed. ... Cut rough opening in trailer sidewall according to appliance instructions. Apply sealant (sold separately) around vent flange and insert vent into opening, ensuring that the collar overlaps the outlet flange of the appliance. Install screws to hold vent to trailer wall.
We recommend this sturdy plastic vent because it helps keep water out of your camper's range hood exhaust, protecting your space from moisture damage. The 1" collar ensures a secure fit, and the lockable damper adds extra peace of mind.Cut rough opening in trailer sidewall according to appliance instructions. Apply sealant (sold separately) around vent flange and insert vent into opening, ensuring that the collar overlaps the outlet flange of the appliance. Install screws to hold vent to trailer wall.
Heavy-duty plastic vent attaches to outside wall of RV or enclosed trailer to keep water out of range hood exhaust outlet. Canopy blocks out water. Damper can be locked in closed position. ... Cut rough opening in trailer sidewall according to appliance instructions. Apply sealant (sold separately) around vent flange and insert vent into opening, ensuring that the collar overlaps the outlet flange of the appliance. Install screws to hold vent to trailer wall.
We recommend this sturdy plastic vent because it helps keep water out of your camper's range hood exhaust, protecting your space from moisture damage. The 1-3/4" collar ensures a secure fit, and the lockable damper adds extra peace of mind.Cut rough opening in trailer sidewall according to appliance instructions. Apply sealant (sold separately) around vent flange and insert vent into opening, ensuring that the collar overlaps the outlet flange of the appliance. Install screws to hold vent to trailer wall.
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch, included.(Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.) Apply sealant to bottom of flange. Be sure to surround each screw hole. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
Heat vent with a rotating grille and damper to keep your RV comfortable. Easily adjust warm or cool airflow in any location with minimal effort. ... Features: Rotating RV vent with damper fits your 4" ducting Vent base mounts into the floor, wall, or ceiling with screws Damper lets you control air volume Louvered grille snaps onto base, covers the screws, and rotates 360 degrees to direct air Durable plastic construction rated for heating, but can also be used as a cooling vent Mounting hardware included Made in the USA Specs: Cutout dimension: 4-1/8" Fits: 4" ducting 1- Year warranty
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.The MaxxFan roof vent has pre-drilled holes in the sidewall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the sidewall with stainless steel screws.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.The MaxxFan roof vent has pre-drilled holes in the sidewall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the sidewall with stainless steel screws.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.The MaxxFan roof vent has pre-drilled holes in the sidewall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the sidewall with stainless steel screws.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the sidewall that are hidden under plastic plugs.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the sidewall that are hidden under plastic plugs.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the sidewall that are hidden under plastic plugs.
Replaces the wall-mounted vent that connects to your 1-3/4" battery box hose and directs dangerous fumes and unwanted odors outside of your RV. ... Features: Replaces the vent for your RV battery box (not included) Directs fumes and odors outside Fits 1-3/4" battery box hoses Louvered vent cover (A10-3300) sold separately White color Specs: Overall dimensions: 4" long x 4" tall x 2" deep Mounting hole dimensions: 1-3/4" diameter x 2" deep Mounting holes: 3-1/4" x 3-1/4" center-to-center
Replaces the roof vent component for your RV's original model 00-04751KS MaxxAir MaxxFan Plus assembly. Works with your existing wall-mounted controller and garnish ring.Designed to replace the roof vent component for your original model 00-04751KS MaxxAir Maxxfan Plus assembly, this powered roof vent has the same great features and works with your existing wall-mounted controller and garnish ring.
This round vent forms the interior part of the Alliance 2-piece enclosed trailer vent. Constructed of UV-resistant polypropylene plastic that holds up to sun exposure. ... Features: Interior vent is the inside part of the Alliance 2-Piece Polypropylene Trailer Vent for 3" Diameter Hole Fits half-moon exterior trailer vent (HMAV2; sold separately) Round, slotted interior piece installs inside your trailer You can easily trim vent tube to fit thin walls UV-resistant, polypropylene plastic construction stands up to the elements Black color Specs: Fits 3" diameter hole in enclosed trailer Diameter at flange: 4-1/8" Vent tube outside diameter: 2-15/16" Tube depth: 1-1/2" Flange width: 5/8" 3 Screws (sold separately) required for installation Hole diameter: 3/16" (fits #8 screw) Sealant sold separately
... Ceiling fan mode circulates air when vent is closed.Like the remote control, the flush-mounted keypad on the vent allows you to operate the vent, the fan, and the thermostat. The rain sensor can only be activated or deactivated from the keypad.
Filters
