Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheelstud for 8K to 12K disc brakes or idler hubs with 5/8" studs.Features: Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheelstud for disc brakes or idler hubs Made in the USA
Replace a damaged or stripped stud on your 8K or 12K DeeMaxx hub with this heavy-duty 5/8"-18 press-fit stud. Measures 3.06" long overall. ... Features: Replacementwheelstud for DeeMaxx 8K and 12K trailer hub and hub-rotor assemblies 5/8"-18 Thread size handles heavy loads and high torque requirements Press-fit design installs securely - no threading or modification required Durable steel construction resists wear from torque cycles and road stress Ideal for replacing damaged or worn-out studs to maintain safe wheel retention Specs: Application: DeeMaxx 8K and 12K hubs and hub-rotor assemblies Thread size: 5/8"-18 Overall length: 3.06" Knurl diameter: 0.687" (verify hub fitment before installation) Quantity: 1 replacementstud
Replaces (1) 4-3/4" x 1-1/2"-22 Dexter press-in wheelstud for your trailer hub and drum assembly (008-401-72).Features: Replaces (1) 4-3/4" x 1-1/2"-22 Dexter press-in wheelstud for your trailer hub and drum assembly (008-401-72). Fits: Model number: 008-401-72 , Dexter trailer hub and drum assembly
Replaces a screw-in wheelstud for your trailer hub. 1/2"-20 Sized bolt.Features: Replaces a screw-in wheelstud for your trailer hub 1/2"-20 Bolt size Grade 5 bolt Overall length: 2" Thread Diameter (A) Overall Length (B) Lug Nut End Length (C) Hub End Length (D) 1/2" 2" 1-1/16" Fine 13/16" Fine
Replaces 1 drive-in wheelstud for your trailer hub. Bolt dimensions: 5/8"-18 x 2-3/4" long.Features: Replaces a drive-in wheelstud for your trailer hub Quantity: 1 wheelstud A B C D E 5/8"-18 2-3/4" 0.31" 1.03" 0.69"
Grade 8 wheelstud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 1/2"-20 thread size will fit other hub assemblies just as well.Features: Replaces 1 drive-in wheelstud for your trailer's hub assembly Fits 13" DeeMaxx hub-and-rotor assemblies Resists corrosion thanks to zinc finish Performs well even in the most demanding environments Grade 8 bolt is fit for automotive applications Ultra-high tensile strength Specs: Stud length: 2" Thread size: 1/2"-20 Knurl grade: 0.545"
Stud cleaning tool allows you to quickly clean the rusted and corroded 1/2" wheelstuds on your car or trailer. Stainless steel brush efficiently cleans studs to ensure proper wheel mounting. ... Features: Stud cleaning tool allows you to quickly clean rusted and corroded 1/2" wheelstuds Clean studs allow for proper wheel mounting Includes stud cleaning tool, stainless steel brush cartridge, and 1/2" drive adapter Requires handheld drill (not included) or Counteract air driver (CA39FR - sold separately)
Fully assembled 10" brake drum and hub unit for 3,500 lb axles. Includes preinstalled bearings, seal, and 1/2" studs with a 5 on 4-1/2" pattern for a clean, reliable replacement.Features: One complete 10" hub-and-drum assembly for 3,500 lb trailer axles Pre-greased inner and outer bearings simplify installation Provides the braking surface for 10" electric or hydraulic drum brakes Races and zinc-plated 1/2" wheelstuds come pre-installed Durable cast-iron construction for long-term performance Includes: Brake hub assembly Pre-greased inner (L68149) and outer (L44649) bearings Seal (10-19) Dust cap with plug 1-3/4" Cotter pin 1" 6-Slot castle nut (1"-14 threads, 1-1/2" hex, 9/16" tall) Spindle washer (1.03" ID, 1.68" OD) (5) 60-Degree cone lug nuts (fit 1/2"-20 studs) Specs: Axle rating: 3,500 lb Bolt pattern: 5 on 4-1/2" Brake size: 10" Stud size: 1/2" Wheel size compatibility: 12" to 15" Bearings: inner L68149, outer L44649 Seal: 10-19 Material: Cast iron Quantity: 1 assembly Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
This kit includes everything you need to upgrade your triple-axle boat trailer or camper to disc brakes for improved performance and greater stopping power. The Maxx coating is even better than Dacromet for superior corrosion protection.This convenient time saver means you'll always have the guidance you need on hand when the time comes for maintenance. All-in-one Brake Replacement DeeMaxx's integral brake kits combine the brake hub and rotor into a single cast iron piece. Unlike a slip-on assembly, the one-piece setup makes installation easier since the hub and the rotor are combined .
Replaces a pressed-in mounting stud for Dexter 10" hydraulic hub and drum assembly with a 5 on 4-1/2 bolt pattern. 1/2"-20 x 1-5/8".Features: Replaces a pressed-in mounting stud for Dexter 10" hydraulic hub and drum assembly with a 5 on 4-1/2 bolt pattern (T1543900CB042) Specs: Knurl diameter: 0.542" Length under head of bolt: 1.69" Bolt size: 1/2"-20 x 1-5/8" Quantity: 1 mounting stud
Grade 8 wheelstud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 9/16"-18 thread size will fit other hub assemblies just as well.Features: Replaces 1 drive-in wheelstud for your trailer's hub assembly Fits 13" DeeMaxx hub-and-rotor assemblies Resists corrosion thanks to zinc finish Performs well even in the most demanding environments Grade 8 bolt is fit for automotive applications Ultra-high tensile strength Specs: Stud length: 2-1/2" Thread size: 9/16"-18 Knurl grade: 0.689"
Grade 8 wheelstud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 1/2-20" thread size will fit other hub assemblies just as well. ... Features: Replaces 1 drive-in wheelstud for your trailer's hub assembly Fits 13" DeeMaxx hub-and-rotor assemblies Resists corrosion thanks to zinc finish Performs well even in the most demanding environments Grade 8 bolt is fit for automotive applications Ultra-high tensile strength Specs: Stud length: 2-1/2" Thread size: 1/2"-20 Knurl grade: 0.545"
Grade 8 wheelstud fits DeeMaxx 10" and 12" hub-and-rotor assemblies, but its standard 1/2"-20 thread size will work on other hub assemblies just as well.Features: Replaces 1 drive-in wheelstud for your trailer's hub assembly Fits DeeMaxx 10" and 12" integral hub-and-rotor assemblies Resists corrosion thanks to zinc finish Performs well even in the most demanding environments Grade 8 bolt is fit for automotive applications Ultra-high tensile strength Specs: Stud length: 1-11/16" Thread size: 1/2"-20 Thread length: 1" Knurl dimensions: 0.545" diameter x 11/16" long
Filters
