This standard, RV-style, 7-pole connector provides a secure connection between your trailer and tow vehicle. Black plastic construction prevents rusting, enhances appearance and makes plug removal a snap.Features: Standard, 7-pole plug connects trailer to socket on tow vehicle Black plastic construction Eliminates rusting Enhances appearance Prevents difficulty in plug removal Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pin accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Dual grips Promote easy removal of plug from socket Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wire gauges: Red, brown, green, and yellow: 14 gauge Blue: 12 gauge White and black: 10 gauge Wiring configuration: Blue: electric brake Green: tail lights Red: left turn signal and brakes Brown: right turn signal and brakes Yellow: auxiliary and reverse lights Black: battery White: ground wire 1-Year warranty 12-706Pollak Black Plastic, 7-Way, RV-Style Trailer Connector - Trailer End Replaces 30305; 118021
Extend your trailer wiring with this 12" 4-way flat harness, built with a molded, weather-resistant plug for durability. Color-coded 18-gauge wires make installation easy, while the polarized connection ensures a secure, proper fit.Specs Electrical Current: 15 amps Wire gauge: 18 Dimensions Harness length: 12"
Establish a secure connection between your towing vehicle and trailer with this 7-pole, RV blade-style socket. Black plastic socket has non-corroding, shock-resistant interior design that eliminates shorting out and is color-coded to RVI standards.Features: Standard, 7-pole, RV blade-style socket connects tow vehicle to trailer Black plastic construction Eliminates rusting Enhances appearance Prevents difficulty in plug removal Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded lid with stainless steel spring and rubber gasket Prevents leaks when closed Drain slot has angled design for drainage Secures trailer-end connector in socket Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License, and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge Distance between mounting holes center to center: 2-1/4" wide x 1-1/2" tall 1-Year limited warranty
This adapter plugs into your vehicle's 7-way, round-pin receptacle to adapt it for use with a trailer-end, 7-way, RV-style plug. The 7-way flat receptacle includes a hinged cover to keep dirt and moisture out of the connection.Features: Adapter converts your 7-way, round-pin vehicle-end connector for use with a 7-way, RV-style trailer-end connector Lets you tow a trailer with a 7-way blade plug Works with any RV-style, 7-way plug Connects ground, left turn, right turn and stop circuits Round, floating, solid brass pins in plug Ensure minimum voltage drop Align easily for maximum contact Spring-loaded, hinged door on socket to protect the interior from dirt and moisture Collar with 4 mounting holes lets you mount the socket to your bumper Plug is constructed of glass-filled nylon Socket is constructed of high-impact, ABS thermoplastic Specs: Overall length: 14-1/2" Length between plug and socket: 7-1/2" Wire configuration: White: ground return Black: clearance, side marker and identification lights Yellow: left turn signal and hazard signal Red: stop lights and anti-lock devices Green: right turn signal and hazard lights Brown: tail light, rear clearance marker and license plate light Blue: auxiliary circuit/ABS power Wire gauge: White: 8 Red, blue: 10 Black, yellow, green, brown: 12 1-Year limited warranty Note: If your 7-round plug is wired separately (brake light and turn signals on different wires), this adapter won't work.
Establish a secure connection between your tow vehicle and trailer with this 9-pole, RV-style socket. Socket has spring-loaded contacts and floating pins to provide easy alignment, ensure minimum voltage drop and promote the most positive contact.Features: Heavy-duty, 9-pole plug connects tow vehicle to semi trailer Round, floating pins Ensure minimum voltage drop Terminals designed for (2) 8-gauge, (2) 12-gauge and (5) 14-gauge wires Promote easy alignment Provide the most positive contact Spring-loaded contacts Completely field serviceable for easy repairs Black plastic housing Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground Return - 8 gauge Blue - Electric Brakes - 12 gauge Green - Tail, License and Running Lights - 14 gauge Black - Battery Charge - 8 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Backup, Auxiliary Ground or Circuit - 14 gauge Gray - Auxiliary Circuit - 12 gauge Orange - Reefer (tag) or Stop - 14 gauge 1-Year limited warranty
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
Hello Douglas, Thanks for writing in, and thank you for your order! I am sorry to report that the manufacturer does not have a weld pattern or installation instructions available for the Sleeve-Lock A-Frame Trailer Coupler #CA-5296-B. I know that…
Hey Claude, there isn't a replacement grease cap made for the part #RG04-230 but there's also no reason you couldn't use this cap with a grease setup. It would work just fine for that application.
That number doesn't give me a cross-reference. To get a replacement you will need to pull the bearings out of the hub and on the face of both the inner and outer bearing there will be a number printed on the bearing face. If you can give me those…
No, there should only be one wire coming out of the Clear Utility Light, item #507-12. There is another wire inside that light, see photo at right, that is attached to the mounting hardware for grounding the light. This requires that the light be…
The Installation Instructions for the Convert-A-Ball Cushoined 5th-Wheel-to-Gooseneck Adapter #CAB-C5G says to tighten down the cap screws to approximately 100 ft. lbs. Keep in mind that you will need someone to help hold the adapter while someone…
According to my research the Transcom part 21334TC is an oil seal with a 2.125" inner diameter and a 3.372" outer diameter and the Transcom part 2133TB is a grease seal with a 2.125" inner diameter and a 3.376" outer diameter.…
There isn't a motor that can be added to the Pro Series Jacks part #PS1400960376. But if you are in the market for that style system, I recommend using #BD182804, and then add motor assembly #BD1824200100. You can also add #BDCS730300 and…
The weight of 1600 gallons of water, without the water tank's own weight factored in, is about 13,350-lbs. For such a high-weight application I suggest Bulldog Square Jacks #BD182804 and #BD182805 along with Connecting Rod #BDCS730300. Two jacks…
The yellow/brown and green/brown wires are the running light circuit on the trailer. The new 4-way that has a single brown wire can still be used but you will need to run both wires of the trailer to single brown wire on the 4-way. This is a very…
Establish a secure connection between your semi trailer and tow vehicle with this heavy-duty, 9-pole plug. Plug has round, floating pins to promote easy alignment, ensure minimum voltage drop and provide the most positive contact.Features: Heavy-duty, 9-pole plug connects semi trailer to socket on tow vehicle Round, floating pins Ensure minimum voltage drop Terminals designed for (2) 8-gauge, (2) 12-gauge and (5) 14-gauge wires Promote easy alignment Provide the most positive contact Spring-loaded contacts Completely field serviceable for easy repairs Black plastic housing Tapered design with jumbo, finger-pull grips Easy hand-position pull 2 Hang-up holes Specs: Wiring configuration: Color - circuit - recommended wire gauge: White (ground): 8-gauge Blue (electric brakes): 12-gauge Green (tail lights): 14-gauge Black (battery charge): 8-gauge Red (stop / left turn): 14-gauge Brown (stop / right turn): 14-gauge Yellow (auxiliary): 14-gauge Gray (auxiliary): 12-gauge Orange (reefer or stop): 14-gauge 1-Year limited warranty
Built tough with a die-cast metal housing, this 4-way round plug keeps your trailer connected and your wiring protected. The built-in cable guard fights chafing, while the stainless steel spring keeps things snug.User-friendly finger grips: Simplifies insertion/removal for quick towing connections. Versatile wiring setup: Interchangable design fits Pollak and other brands seamlessly. Wide wiring compatibility: Accepts up to 12-gauge wires for various trailer setups. Features to know about Durable and Reliable Connections: Heavy-Duty Metal Construction Tired of worrying about the durability of your trailer connectors?
This kit provides a 7-pole, RV-style trailer connector, wiring harness and mounting bracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.Features: Replacement 7-pole, sealed socket, RV-style trailer connector with pigtail and mounting bracket High-impact nylon construction Resists corrosion 4' Long wiring harness Hard-wires into vehicle wiring system Has 1/2" convoluted tubing Forms weathertight seal on back of socket Keeps out moisture Prevents corrosion Includes color-coded, 7-wire leads that meet RVI standards Right-angle mounting bracket Convenient mount under rear bumper of truck or SUV Zinc-plated construction Black, epoxy coating Protects against rust and corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents leaks when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 12 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty
Establish a secure electrical connection between your RV and towed vehicle with this 6-pole, round pin socket. Plastic socket has brass pins to ensure minimum voltage drop and a rubber boot to protect terminals from dust and moisture.Features: 6-Pole socket connects towed vehicle's lights to RV's Round, solid brass pins Minimum voltage drop is ensured Dielectric (non-conducting) grease coating Protects against corrosion and resistance Wire gauges up to #12 accepted Rubber boot covers terminals Seals wire connection from dust and moisture Spring-loaded cover Protects socket interior from the elements 2-Hole mounting style Corrosion-resistant, ABS plastic construction Interchangeable with other 6-pole, round pin connectors Specs: Mounting dimensions: 1-3/8"-diameter hole Mounting screw holes: 1/4" Wiring configuration: Color - circuit: White - Ground Return Brown - Tail Lights Yellow - Left Turn Red - Stop and/or Electric Brakes Green - Right Turn Blue - Auxiliary Circuit 1-Year limited warranty
Establish a secure connection between your trailer and semi or other tow vehicle with this 7-pole, solid pin, wire-insertion-style socket. Zinc die-cast socket is self-grounding and includes floating pins for easy alignment and maximum pin contact.Features: Zinc die-cast 7-pole socket connects trailer to towing vehicle Round, floating, solid brass pins Easy alignment and maximum contact Minimum voltage drop is ensured Dielectric (non-conducting) grease coating Protects against corrosion and resistance Wide range of wire gauges acceptable, from #16 wire to #8 ground wire Ground terminal accepts minimum #14 gauge - maximum #8 gauge All other terminals accept minimum #16 gauge - maximum #10 gauge Self-grounding to #1 Ground Terminal Slant-mounted with built-in drain slot on cover Rids housing interior of accumulated moisture Opens and closes with stainless steel spring Bottom lip extended for better plug support 2-Hole mounting style Highest quality - meets and exceeds all standards of SAE J560 Interchangeable with all competitive makes Specs: Mounting dimensions: 2" diameter hole Volt rating: 6 volts - 28 volts Current rating: 40 continuous-duty amps Wiring configuration: Color - circuit - recommended wire gauge: White - Ground Return - 10 gauge ( FMVSS -121 Anti-lock Gauge - 8) Black - Clearance, Side Marker, Identification - 12 gauge Yellow - Left Turn and Hazard Signal - 12 gauge Red - Stop Lamps and Anti-Lock Devices - 10 gauge (FMVSS-121 Anti-lock Gauge 10) Green - Right Turn and Hazard Signal - 12 gauge Brown - Tail, Rear Clearance, Marker and License-Plate Lamps - 12 gauge Blue - Auxiliary Circuit/ABS - 10 gauge 1-Year limited warranty 11-720 Pollak Heavy-Duty, 7-Way, Round Pin Trailer Wiring Socket - Vehicle End Replaces 52016
Establish a secure connection between your trailer and semi or other tow vehicle with this heavy-duty, 7-pole plug. Plug has round brass pins to ensure minimum voltage drop and pull grips for easy insertion and removal.Features: Heavy-duty, 7-pole plug connects trailer to socket on tow vehicle Round, floating, solid brass pins Minimum voltage drop is ensured Coated with dielectric (non-conducting) grease Prevents corrosion and resistance Easy alignment and maximum contact Solid brass terminal screws Zinc, die-cast housing for durability Tapered design with jumbo, finger-pull grips Easy hand-position pull 2 Hang-up holes Cable lock with plated steel retainer screw High-impact, ABS thermoplastic interior Includes extended lip for easy removal and replacement Accepts wide range of wire gauges - from #16 wires to #8 ground wire Highest quality - meets and exceeds all standards of SAE J560 Interchangeable with all competitive ATA (American Trucking Associations) types Specs: Volt rating: 6 volts - 28 volts Current rating: 40 continuous-duty amps Wiring configuration: Color - circuit - recommended wire gauge: White - Ground Return - 8 gauge Black - Clearance, Side Marker, Identification - 12 gauge Yellow - Left Turn and Hazard Signal - 12 gauge Red - Stop Lamps and Anti-Lock Devices - 10 gauge Green - Right Turn and Hazard Signal - 12 gauge Brown - Tail, Rear Clearance, Marker and License-Plate Lamps - 12 gauge Blue - Auxiliary Circuit/ABS - 10 gauge 1-Year limited warranty 11-700 Pollak Heavy-Duty, 7-Way, Round Pin, Trailer Wiring Connector - Trailer End Replaces 52024 Note: Does not fit Pollak Cable Guard (PK11763).
This adapter plugs into your 7-way, blade-style, vehicle-end connector to convert it for use with a 7-way, round-pin style, trailer-end connector.Features: Die-cast zinc construction Male 7-way, blade-style connector on adapter Joins with female 7-way, blade-style connector on vehicle Female 7-way, round pin-style connector on adapter Joins with male 7-way, round pin-style connector on trailer Specs: Voltage Rating: 12 Volts 1-Year limited warranty
This adapter plugs into your 7-way, blade-style, vehicle-end connector to convert it for use with a 7-way, round-pin style, trailer-end connector.Features: Nylon construction Male 7-way, blade-style connector on adapter Joins with female 7-way, blade-style connector on vehicle Female 7-way, round pin-style connector on adapter Joins with male 7-way, round pin-style connector on trailer Specs: Voltage Rating: 12 Volts 1-Year limited warranty
This standard, RV-style 7-pole connector provides a secure connection between your trailer and tow vehicle. Traditional metal construction provides maximum resistance to weather and corrosion.Features: Standard, 7-pole plug connects trailer to socket on tow vehicle Heavily plated, metal construction Resistant to weather and corrosion Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pin accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Jumbo, welded pistol grip Promotes easy removal of plug from socket Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge 1-Year limited warranty 12-702 Pollak Metal 7-Way, RV-Style Trailer Connector - Trailer End Replaces 30315
Establish a secure connection between your towing vehicle and trailer with this 7-pole, RV-style socket. Metal socket has non-corroding, shock-resistant interior design that eliminates shorting out and is color coded to RVI standards.Features: Standard, 7-pole, RV-style socket connects tow vehicle to trailer Heavily plated metal construction Resistant to weather and corrosion Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded cover with stainless steel spring Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge At its widest point, the diameter of the round portion 1-7/8" Mounting holes are 1-1/2" from center to center vertically and 2-3/16" from center to center horizontally 1-Year limited warranty 12-703 Pollak Metal 7-Pole, RV-Style Trailer Socket - Vehicle End Replaces 30310
Establish a secure connection between your trailer and semi or other tow vehicle with this heavy-duty, 7-pole RV blade-style socket and mounting bracket.Features: Heavy-duty, 7-pole, RV blade-style socket connects tow vehicle to trailer Zinc, die-cast housing for durability Maximum amperage: 35 Includes mounting bracket and hardware 12-704 Pollak RV 7-Blade Plug End Socket with Bracket
This complete kit allows you to add a 7-pole, RV-style socket to your truck bed for use with a fifth wheel or gooseneck. Kit includes socket, an adapter that plugs directly into your OEM wiring harness and a T-Connector to integrate the system.Features: 7-pole, sealed socket RV-style socket with T-Connector and Dodge/Chrysler adapter plug Provides 7-pole connector in the truck bed Plugs into Dodge/Chrysler OEM harness - no splicing Provides quick and easy installation of RV socket in truck bed High-impact nylon construction Resists corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents intrusion of moisture when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Application: Dodge trucks with factory plug Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 10 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty 11-893, 11-933, and 11-932 Pollak 7-Way Socket with T-Connector and Adapter for Chrysler Trucks pulling Fifth Wheels or Goosenecks Replaces 20111 Similar to V30137
Quickly and easily convert a 7-pole, RV-style connector to a 4-way, flat connector with this RV connector adapter. Adapter has a non-corrosive nylon shell.Features: 7-Pole RV connector to 4-way flat adapter Promotes quick and easy conversion of 7-pole, RV-style connector to 4-way flat connector Allows 1 vehicle to tow either campers or boat trailers without electrical brakes Connects Ground, Left Turn, Right Turn and Stop circuits Tethered cap for protection from sand, dirt and moisture Non-corrosive nylon shell and insert Specs: Application: Vehicles with 7-pole connectors 1-Year limited warranty This adapter will make the two trailer connectors pictured below work together. 7-Pole Connector Socket on vehicle 4-Way connector on trailer 12-716 Pollak 7-Way to 4-Way Connector Adapter Replaces 37358
Extend your trailer wiring with this 24" 4-way flat harness, built with a molded, weather-resistant plug for durability. Color-coded 18-gauge wires make installation easy, while the polarized connection ensures a secure, proper fit.
Establish a secure connection between your trailer and tow vehicle with this metal, 4-pole plug. Round brass pins ensure minimum voltage drop, and pull grips enable easy insertion and removal.Features: Heavy-duty, metal, 4-pole plug connects trailer to socket on tow vehicle Fits Pollak heavy-duty, 4-pole round pin wiring socket (PK11404) Does not fit Pollak heavy-duty, 4-pole, round pin socket, concealed terminals (PK11410) Round, solid brass terminal pins Minimum voltage drop is ensured Dielectric (non-conducting) grease Prevents corrosion and resistance Solid brass terminal screws Zinc, die-cast housing for durability Finger grips make insertion and removal easy Cable lock with plated steel retainer screw Prevents chafing Provides more support for cables Saves installation time High-impact, ABS thermoplastic interior Includes extended lip for easy removal and replacement Accepts up to #12 gauge wires Interchangeable with competitive brands Specs: Volt rating: 12 volts - 24 volts Current rating: 35 amps Wiring configuration: Color - circuit: White - Ground Return Green - Right Turn and Brake Lights Yellow/Red - Left Turn and Brake Lights Brown - Tail Lights 1-Year limited warranty
Establish a secure connection between your trailer and your towing vehicle with this 4-pole, round pin, wire-insertion style socket. Zinc die-cast socket has concealed terminals to provide easy assembly and durability .Features: Heavy-duty, metal, 4-pole socket connects trailer to towing vehicle Round brass pins Minimum voltage drop is ensured Dielectric (non-conducting) grease coating Protects against corrosion and resistance Wire gauges up to #12 gauge wire accepted Concealed terminals for durability Provide easy assembly Spring-loaded lid Keeps dust and moisture out of interior 2-Hole mounting style Specs: Fits Pollak Heavy-Duty, 4-Pole Round Pin Connector (PK11402) Does not fit Pollak Heavy-Duty, 4-Pole, Round Pin (PK11409) Mounting dimensions: 1-3/8" diameter hole Mounting screw holes: 1/4" Volt rating: 12 volts - 24 volts Current rating: 35 amps Wiring configuration: Color - circuit: White - Ground Return Green - Right Turn and Brake Lights Yellow/Red - Left Turn and Brake Lights Brown - Tail Lights 1-Year limited warranty 11-404 Pollak Heavy-Duty, 4-Way, Round Pin Trailer Wiring Socket, Concealed Terminals - Metal - Vehicle End
Built tough with a die-cast metal housing, this 6-way round plug keeps your trailer connected and your wiring protected. The built-in cable guard fights chafing, while the stainless steel spring keeps things snug.User-friendly finger grips: Simplifies insertion/removal for quick towing connections. Versatile wiring setup: Interchangable design fits Pollak and other brands seamlessly. Wide wiring compatibility: Accepts up to 12-gauge wires for various trailer setups. Features to know about Durable and Reliable Connections: Heavy-Duty Metal Construction Tired of worrying about the durability of your trailer connectors?
Filters
