7-7/16" x 1-5/8" Rectangular, surface-mount load ramp light with 4 LEDs produces a bright white beam to illuminate a wide area. Powder coated black aluminum housing resists impact and corrosion. ... Features: Rectangular, LED light emits a powerful white light so you can easily see your ramp while loading Aluminum construction and built-in heat sink protect against overheating Black powder coat resists corrosion LEDs are energy efficient, long-lasting, and vibration resistant Surface mount unit installs with 2 screws (not included) Hardwires to your application 12V compatible Specs: Overall dimensions: 7-7/16" wide x 1-5/8" tall x 1-3/4" thick Light output: 2,000 lumens Diodes: 4 Input voltage: 9V - 30V Power draw at 12V: 1.3 amps - 1.9 amps Wire length: 9" IP rated: 68 Limited lifetime warranty
This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing. Resistor has right-angle male PL-3 plug on one end and female PL-3 plug on the other end.Hyperflashing (or rapid blinking) of turn signals can occur when you switch from incandescent lights to LED lights. LEDs draw less power than incandescent bulbs, which often causes your vehicle to think that the bulb is burned out or about to burn out.
This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing. Resistor has right-angle male PL-3 plug on one end and a pigtail connection on the other end.Hyperflashing (or rapid blinking) of turn signals can occur when you switch from incandescent lights to LED lights. LEDs draw less power than incandescent bulbs, which often causes your vehicle to think that the bulb is burned out or about to burn out.
An over 80" ID bar and white loadlight built into one housing. Keep wide trailers properly marked on the road or switch on bright white light for backing into tight spots, loading equipment, or setting up at camp after dark.Over 80" ID Bar And Load Lamp: Red/white combo keeps wide trailers marked and lights up the work area. Add 500 Lumens Of Work Light: White LEDs provide usable light for backing, loading, and campsite tasks.
Unit flashes the lights on your single- or tandem-axle trailer while also activating its brakes if it disconnects from your vehicle. This way, not only will your trailer stop, but the flashing lights will also alert others on the road to the danger.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Boosts safety by also flashing your trailer's signal lights if disconnect occurs ICU system activates when breakaway cable detaches Automatically charges battery with built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case provides easy access to battery Self-tapping screws are sold separately Breakaway switch installs on your trailer's frame with self-tapping screws Protects the battery from rain and debris with durable, plastic case Rubber O-ring around lid helps keep water out of the box Wiring diagram is printed on the battery box lid Keeps wires neat with included wire loom Includes breakaway switch, charger, battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric brakes Breakaway cable length: 48" Charger amperage: 0.5 amps Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Push-to-test button lets you check the battery's state of charge LED lights indicate current battery status Green = fully charged Yellow = charging Red = recharge needed Top-loading case is easy to access from above Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Wire loom neatly contains and protects wires Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on box Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 4-3/4" long x 6" wide x 4-7/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Guard against LED-related turn signal problems with these load-resistors. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.Features: Fixes hyperflashing or burned-out bulb indicators on turn signals with LED lights Fits tight applications with compact design Installs quickly and easily Works with most import and domestic vehicles Constructed of durable aluminum Includes 2 load resistors - 1 for each turn signal Specs: 6 Ohms 50 Watts Lifetime warranty Because LED bulbs have little resistance on their own, they can create a "hyperflash" situation when used in turn signals.
Guard against LED-related turn signal problems with this load-resistor kit. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.Features: Fixes hyperflashing or burned-out bulb indicators on turn signals with LED lights Has compact design for tight applications Installs quickly and easily Works with most import and domestic vehicles Constructed of aluminum Specs: 6 Ohms 50 Watts 1-Year warranty Please Note: One kit is required for each LED bulb used in turn signal applications.
Guard against LED-related turn signal problems with this load-resistor kit. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.Features: Fixes hyperflashing or burned-out bulb indicators on turn signals with LED lights Has compact design for tight applications Installs quickly and easily Works with most import and domestic vehicles Constructed of ceramic Specs: 6 Ohms 25 Watts 1-Year warranty Note: One kit is required for each LED bulb used in turn signal applications.
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status. If it's green, it means the battery is fully charged. Yellow shows it's currently charging, and red indicates a low battery.
LED tester lets you easily check the battery's charge. The built-in charger in this kit keeps your battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a stop should it become disconnected from your vehicle.At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status. If it's green, it means the battery is fully charged. Yellow shows it's currently charging, and red indicates a low battery.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status. If it's green, it means the battery is fully charged. Yellow shows it's currently charging, and red indicates a low battery.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status. If it's green, it means the battery is fully charged. Yellow shows it's currently charging, and red indicates a low battery.
17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Dark outdoor areas stay unevenly lit, leaving shadows that hide obstacles and limit what you can see. This telescoping 2,000-lumen LED raises light up to 10 feet for wide overhead coverage, so you can clearly see and work across a large area.Adjustable Height for Open Areas Low lanterns and handheld lights often shine at the wrong angle across tents, tables, and gear. The telescoping pole extends from approximately 3' to 10' tall, lifting the light above your setup.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Mounts Fast: Strong magnetic bases stick securely to any trailer or towed vehicle. All Signal Functions: Stop, turn, and tail lights provide everything you need for towing. Great for Temporary Use: Ideal for flat towing or when trailer lights aren't working.
Dark campsites leave large areas unevenly lit, with shadows hiding obstacles and work surfaces. This telescoping LED lantern lifts a 4,000 lumen light up to 10 feet for wide overhead coverage, so you can see clearly and work across the entire area.Highlights Lights Up Large Campsites and Work Areas: 4,000 lumens and overhead placement cover an area up to approximately 100' in diameter. Raises Light Over the Whole Setup: Telescoping pole extends from approximately 3' to 10' to cast light down from above.
Dark campsites leave large areas unevenly lit, with shadows hiding obstacles and work surfaces. This telescoping LED lantern lifts a 1,200 lumen light up to 9 feet for wide overhead coverage, so you can see clearly and work across the entire area.Features to know about Overhead Light Covers More Ground Ground-level lights leave shadows across camp setups and work areas, especially when you are moving around after dark.
Plug this adapter into your existing 7-way when towing a trailer equipped with LED lights so that your vehicle's computer will recognize the trailer's signals. Designed for use on vehicles with Trailer Lamp-Out sensors.Features: Plugs into an existing 7-way socket to provide a new 7-way socket that is able to recognize LED trailer lights Built-in resistors enable LED signals from your trailer to be read by your vehicle's computer No cutting or splicing required Great for use on vehicles with Trailer Lamp-Out sensors, such as Audi, Mercedes-Benz, and Volkswagen vehicles with the factory tow package Spring-loaded dust cover protects terminals from moisture and debris when connector is not in use 1-Year limited warranty
Use integrated switch or wire to a light switch to turn this double dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. ... Or perhaps you need to upgrade the dim, old lights in your enclosed car hauler? This dome light has warm white LEDs that give you brighter light underneath a kitchen cabinet, in a walkway, above a shower stall, or inside a small hunting cabin.
Use integrated switch or wire to a light switch to turn this double dome light on and off. Included 2 incandescent bulbs are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim, old lights in your enclosed trailer? This incandescent dome light gives you warm, yellow light underneath a kitchen cabinet, in a walkway, or inside your pop-up camper.
Use integrated switch or wire to a light switch to turn this single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. ... Or perhaps you need to upgrade the dim, old lights in your enclosed car hauler? This dome light has warm white LEDs that give you brighter light underneath a kitchen cabinet, in a walkway, above a shower stall, or inside a small hunting cabin.
Use integrated toggle switch or wire to a light switch to turn this double dome light on and off. Included 2 incandescent bulbs are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim, old lights in your enclosed trailer? This incandescent dome light gives you warm, yellow light underneath a kitchen cabinet, in a walkway, or inside your pop-up camper.
Use the integrated switch or wire to a light switch to turn the single dome light on and off. Included incandescent bulb and acrylic lens are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim old lights in your horse trailer? This dome light gives you bright yellow, incandescent light underneath a kitchen cabinet, in a walkway, by a workbench, or inside your enclosed trailer.
Filters
