Replaces a damaged bracket for your Trailer Valet swivel jack and trailer mover, or allows you to use your Trailer Valet swivel jack on a second trailer.Features: Replaces a damaged bracket for your Trailer Valet swivel jack and trailer mover (STC-V211) Can also be used on a second trailer to allow you to use your Trailer Valet swivel jack on an additional trailer Quantity: 1 replacement or additional bracket
This weld-on bracket provides a solid, secure mounting point for your Atlas jack on almost any trailer frame. Whether upgrading or starting fresh, it's versatile design fits a variety of setups, ensuring a strong, permanent install.Once it's welded to your trailer frame, installation is as easy as bolting on the jack. It's a smart pick for upgrades or new builds. Universal Bracket Compatibility The bracket is designed for use with Atlas jacks that include a universal mountingbracket.
Replaces the mountingbracket on your etrailer or Ram snap-ring swivel jack. Bracket welds onto your trailer and uses a 1/2" pull pin. Designed for TJB Series jacks.Features: Provides attachment point for your etrailer or Ram snap-ring swivel jack Designed for use with TJB Series jacks Weld-on design Works with 1/2" pull pin Diameter of snap ring mount: 2-1/2"
Use your Trailer Valet side-mount dolly or drill-powered jack on your large trailer too. This bracket lets you mount your 5X or JXS Series on a trailer frame up to 5" wide x 8" tall.Features: Mount your Trailer Valet dolly or jack on a trailer frame up to 5" wide x 8" tall Works with Trailer Valet 5X and JX5-S Series, side-mount units Includes the elbow joint to turn your XL, MV Pro, or RVR Series dolly into a side-mount model Get ultimate protection with durable, rust-resistant wrinkle black powder coat finish Easily install on your frame with the included hardware Specs: Bracket dimensions: 8" tall x 9-3/8" wide Bolt holes spaced 7-1/2" apart on center horizontally Bolt type: M10 x 150-mm carriage bolt
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Zinc finish resists rust - and looks good! Stabilizing footplate. Keeps jack from sinking into soft ground Built-in grease zerk. Super easy to grease Corrosion-resistant finishes. Keeps your jacks in good working condition Outer tube has black powder coat Inner tube and footplate has clear zinc finish Mounting plates have matte black powder finish and e-coat Here's what else you need to know: Bracket height (from bottom of foot to center of pipe mount): 10-1/4" Retracted 20-1/4" Extended Travel: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Capacity: Lift capacity: 3,000 lbs Support capacity: 5,000 lbs Mounting plates: 3,500 lbs Mounting dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Fits frames with a cross section depth of 3" or less Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Warranty: Jacks: 1-Year warranty Mounting plates: limited lifetime warranty
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Zinc finish resists rust - and looks good! Stabilizing footplate. Keeps jack from sinking into soft ground Built-in grease zerk. Super easy to grease Corrosion-resistant finishes. Keeps your jacks in good working condition Outer tube has black powder coat Inner tube and footplate has clear zinc finish Mounting plates have matte black powder finish and e-coat Here's what else you need to know: Bracket height (from bottom of foot to center of pipe mount): 15-5/8" Retracted 31-1/8" Extended Overall height: 22-1/4" Retracted 36-1/4" Extended Travel: 15-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/4" Handle radius: 8" Capacity: Lift capacity: Per jack: 3,000 lbs As a pair: 6,000 lbs Support capacity: Per jack 5,000 lbs As a pair: 10,000 lbs Mounting plates: 3,500 lbs Mounting dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Fits frames with a cross section depth of 3" or less Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Warranty: Jacks: 1-Year warranty Mounting plates: limited lifetime warranty
We designed this pair so that you can get a swivel jack on your trailer without having to weld it on. The mounting plate bolts on, giving you a lot of freedom to put the jack where you want it.Features: Raises and lowers your trailer Pivots down for use, up for storage, and pins in place Pin tethered to jack so it won't get lost Extends with sidewind handle Zinc finish resists rust - and looks good! Stabilizes with footplate to keep it from sinking in soft ground Maintains easily with built-in grease zerk Bolts on with mounting plate Resists corrosion with quality finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Mounting plate with matte black powder and e-coat Specs: Bracket height (from bottom of foot to center of pipe mount): 15-5/8" Retracted 31-1/8" Extended Travel: 15-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8" Capacity: Lift: 3,000 lbs Support: 5,000 lbs Mounting plate: 3,500 lbs Mount dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Fits trailer frames with a cross section depth of 3" or less Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Warranty: Jack: 1-Year warranty Mounting plate: limited lifetime warranty
We designed this pair so that you can get a swivel jack on your trailer without having to weld it on. The mounting plate bolts on, giving you a lot of freedom to put the jack where you want it.Features: Raises and lowers your trailer Pivots down for use, up for storage, and pins in place Pin tethered to jack so it won't get lost Extends with sidewind handle Zinc finish resists rust - and looks good! Stabilizes with footplate to keep it from sinking in soft ground Maintains easily with built-in grease zerk Bolts on with mounting plate Resists corrosion with quality finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Mounting plate with matte black powder and e-coat Specs: Bracket height (from bottom of foot to center of pipe mount): 10-1/4" Retracted 20-1/4" Extended Travel: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Capacity: Lift: 3,000 lbs Support: 5,000 lbs Mounting plate: 3,500 lbs Mount dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Fits trailer frames with a cross section depth of 3" or less Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Warranty: Jack: 1-Year warranty Mounting plate: limited lifetime warranty
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. ... Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mountingbracket and hardware Specs: Application: trailer frames up to 5" tall x 3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mountingbracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mountjack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when drop leg is released Drop leg helps bridge the gap to the ground Works as a powered jack when used with an 18V or 24V, cordless, non-impact drill (not included) Included drill adapter attaches to jack in place of handle and eliminates need to manually crank Resists rust and corrosion, even in areas with salt Wrinkled black powder coat finish has a 700-hour salt spray rating Zinc-nickel inner and outer tubes Won't shake, rattle, or overheat during operation Durable, precision-machined tubing limits rattle Composite gears dissipate heat Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Can be used as manual jack with included, sidewind handle Offers a comfortable rubber grip Easily removes for storage so you can use the drill adapter Lasts for years thanks to durable steel construction Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around the trailer frame Includes mounting hardware Specs: Application: trailer frames up to 6" tall x 6" wide Installation requires 5" of clearance along the trailer frame Lift capacity: Manual: 1,800 lbs With drill: 900 Support capacity: 7,000 lbs Bracket height (from center of top bracket hole to the ground): Retracted: 13-5/8" Extended: 40-15/16" Total lift: 26-5/8" Screw travel : 13-5/8" Drop leg travel : 13" Adjustment hole spacing on drop leg: 3-7/16" from center of hole to center of hole Clearance: 16-1/2" from mountingbracket to top of jack Inner tube dimensions: 2" x 2" Outer tube dimensions: 2-1/4" x 2-1/4" Gear ratio: 3:4 1-Year limited warranty Drill Powered Operation When you're hitching up before a long day of work, or putting away your trailer before turning in for the night, you want to be able to do it with as little effort as possible.
You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.Highlights Weld-On Pipe Mount: Male pipe bracket welds to trailer; jack slides off for security or storage. Drill or Manual Operation: Includes hand crank and Trailer Valet drill attachment.
Fixed leg jack with heavy-duty footplate base and swivel mount offers superior side-load strength in a compact package. Jack has 11-3/8" retracted height and measure 4-1/4" from mountingbracket to top, excluding handle. ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side loading Compact design is perfect for tight applications Tubular swivel design lets you swing jack up for travel, down for use Included pull pin holds jack in place Durable, long-lasting construction Weather-resistant coating on outer tube and zinc inner tube Screw-nut stop prevents damage to screw and/or nut when jack is fully extended Topwind handle has smooth, ergonomic design for easy cranking Includes bushing in top cap and "eagle claw" grip Round, tubular mount and heavy-duty footplate included ASABE compliant Specs: Bracket height: 11-3/8" Retracted 21-3/8" Extended Lift: 10" Clearance: 4-1/4" from mountingbracket to top of jack Tubing width: 2-1/2" Handle radius: 9" Lift capacity: 5,000 lbs Static capacity: 8,000 lbs Limited 5-year warranty
This might be just what you need if you have clearance issues along your trailer frame that won't let you swing a jack up. Wheel swivels 360 degrees. Premium zinc finish with a 500-hour salt spray rating is ideal for boat trailers. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mountingbracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Capacity: 1,000 lbs Bracket height: Retracted: 10" Extended: 25" Screw travel : 15" Inner tube diameter: 1-3/4" Outer tube diameter: 2" Wheel diameter: 6" 3-Year limited warranty Built for Setups that Make a Swivel Jack Impractical to Use Most boat trailer jacks are designed so that you can stow them parallel to your tongue when you're towing.
Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 14-3/4" retracted height and measures 10" from mountingbracket to top, excluding handle.Features: Utility jack is perfect for agricultural and commercial applications Tubular swivel design lets you swing jack up for travel, down for use Included pull pin holds jack in place Topwind handle has smooth, ergonomic design for easy cranking Outer tube has black paint finish Inner tube is zinc plated Weld-on pipe mount and standard footplate included Specs: Bracket height: 14-3/4" Retracted 29-3/4" Extended Lift: 15" Clearance: 10" from mountingbracket to top of jack Inner tube diameter: 2" Outer tube diameter: 2-1/4" Pull pin diameter: 9/16" Lift capacity: 5,000 lbs Limited 1-year warranty
Great for construction and agricultural trailers, this jack includes a heavy-duty, versatile mount that lets you easily install it and also keeps the jack up and out of the way when it's not in use.Features: Heavy-Duty Use: Built for trailers that tow construction equipment, agricultural machinery, and other heavy cargo Strong, Durable Mount: Innovative, heavy-duty bracket gives excellent support for a side-mountjackBracket also makes it easy to remove the jack and remount it out of the way for travel Extended Lift: Drop leg pairs with the already substantial travel to get your trailer raised Strudy and Dependable: Solid steel construction Made in the USA and designed by US Military Veteran Specs: Height (from bottom of foot to top of jack): 24-3/4" Retracted 40-1/8" Extended Total lift: 28" Screw travel: 15" Drop leg travel: 13" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Limited lifetime warranty
With twice the lift of other jacks in its class, this one is ideal for trailers that sit high off the ground. Footplate stabilizes better than a caster wheel. Marine-grade, zinc finish is perfect for boat trailers. ... Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 8-3/16" Extended: 38-3/16" Total lift: 30" Screw travel : 15" Drop leg travel : 15" Adjustment hole spacing on drop leg: 4-7/16" center on center Clearance: 17" from mountingbracket to top of jack Handle swing radius: 6-1/8" Inner tube diameter: 2" Outer tube diameter: 2-1/4" 2-Year limited warranty Designed for Trailers that Sit High Off the Ground Unlike most boat trailer jacks out there, this Dutton-Lainson jack has a drop leg that will make using it faster.
Fixed-leg, compact jack with heavy-duty footplate base welds directly onto your application and offers superior side-load strength in a tight-fitting package. ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side loading Compact design is perfect for tight applications Durable, long-lasting construction Weather-resistant coating on outer tube and zinc inner tube Screw-nut stop prevents damage to screw and/or nut when jack is fully extended Sidewind handle has smooth, ergonomic design for easy cranking Fixed-leg jack welds directly to application Heavy-duty footplate included ASABE compliant Specs: Bracket height: 17-13/16" Retracted 27-13/16" Extended Lift: 10" Tubing width: 2-1/2" Handle radius: 8-1/2" Lift capacity: 5,000 lbs Static capacity: 8,000 lbs Limited 5-year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 15-5/8" Retracted 31-1/8" Extended Travel: 15-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-7/8" long x 5-7/8" wide Pipe mount diameter: Male mount welded on jack: Inner: 2" Outer: 2-1/2" Female mount to weld on to trailer: Inner: 2-1/2" Outer: 3" Handle radius: 8-1/8" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 15-1/4" Retracted 30-1/8" Extended Travel: 14-7/8" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 6-1/2" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 10-1/4" Retracted 20-1/4" Extended Travel: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 11-1/2" Retracted 21-1/2" Extended Travel: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 10-3/8" Retracted 20-5/8" Extended Travel: 10-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
This swivel jack pivots up for travel and down for use. Retracted height is 16". Extended height is 31-1/4". Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 16" Retracted 31-1/4" Extended Travel: 15-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-3/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 15-5/8" Retracted 31-1/8" Extended Travel: 15-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/4" Handle radius: 8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Filters
