Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
This universal wiring kit lets you install an electric brake controller (sold separately) in your vehicle and a 7-way connector for your trailer lights at the same time. Plugs into the existing 4-way on your vehicle.Extra-long vehicles: If you drive a crew cab, extended cab with long bed, cargo van, or extended-length SUV, extra wire (ETBCXW - sold separately) will make installation much easier. Wiring Diagram for Trailer Brake Controller Installation
If your bolt-on Dexter Fortress cap has been damaged but the gasket and install bolts are in good condition, this is what you need. It is the complete cap without the gasket or install bolts. Save yourself some money and just replace what you need.Get Your Hub Sealed Again: Replacement bolt-on cap restores the damaged outer cap when the rest of the setup is still usable. Know What You Need for Install: Replacement includes the cap only; gasket and mounting screws are not included. Black Finish Matches Existing Caps: Blends with your existing Dexter Fortress caps for a consistent look.
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. ... Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems Connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Color-coded wires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Installation To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions.
Hey William, we've got you covered! Excellent choice to improve ride quality, my favorite thing about the Firestone Ride-Rite Air Bags #F79XV is the wireless control lets you adjust everything right from your phone. The link will take you to our…
Hello Leah, thanks for reaching out. Yep, it sure will! The etrailer Trailer Hitch Receiver #e98903 actually fits all models of the 2023 Pacifica. That includes the hybrid and non-hybrid models. What will you be using the hitch for? Are you towing a…
You'd need a front hitch installed on your 2017 Ford F-250 first for a bike rack to install. For that the Draw Tite hitch part #65076 is a confirmed fit and would work well. I really like the Saris Freedom Superclamp part #SA4025F. This is a…
Hey Ryan, welcome back! A brake controller will cover anything with brakes and then you will also need a ball mount. The #C57DR you were looking at will work, but you don't really need all of that. The sway bar would be a permanent addition to a…
I have a great solution for transporting your 50-pound electric bike. If you have the Kuat Transfer V2 #KU24FR (3-bike version) or the #KU74FR (2-bike version), it is important to adhere to the per-bike weight capacity of 40 pounds no matter how many…
I have a solution for you. Here at etrailer, we highly discourage the use of wheel-mount style bike racks when transporting bikes with fenders. With that being said, even if the front wheel of your Macwheel did safely attach to the Kuat Transfer V2…
Thanks for all the details Jason! To get a Blue Ox tow bar to fit with the shackles on your 2021 Jeep Wrangler Sport you'll need either the 7/8" #BX88357 or 1" #BX88358 Adapters, but just be sure to check with the manufacturer of your…
Hi Terry, What exactly isn't working for you with the Draw-Tite QSP Trailer Hitch Silencer #63080? Is the latch not closing on it when you have it on the receiver tube? This just has a channel to slide over the lip of the receiver tube and a…
Hey Dan! The etrailer Electric Trailer Jack #e55ZV weighs 26 lbs so you can expect it to add that much to the tongue of your trailer. If you need anything else feel free to reach out in the comments below.
Hello Denny, My apologies for the delay, getting this battery added to our site took a little more time that expected. You will want the Replacement 12V Sealed LeadAcid Battery for Lite-it Wireless Lights #CU24BR to replace your battery in your…
Hi Mary, The Draw-Tite Max-Frame Trailer Hitch Receiver #DT28GR has a class III rating and is confirmed to fit your 2024 Toyota Corolla Cross Hybrid. It has a 300lb tongue weight capacity so you'd have to stay under that with anything you'd…
Hello Pat. Yes, the Draw-Tite Hitch #DT28GR will indeed fit the 2024 Toyota Corolla Cross Hybrid XSE. I double checked with the manufacturer, and they confirmed that this hitch will fit all models of the 2024 Corolla Cross, so that includes the…
This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.Features: Adapts 4-way flat to both 7-way RV and 4-way flat 4-Way flat output connects tail lights, brake lights, and turn signals 7-Way connects tail, brake, reverse, turn signals, and auxiliary power Dust covers keep connectors clean when not in use Split loom keeps wires contained and well protected Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way Included hardware and metal mounting bracket secures wiring to the vehicle or trailer hitch 1-Year limited warranty Specs: Distance between bracket mounting holes center to center: 2-1/4" Harness length: 17" Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Receiver sits beneath your bumper so it's out of the way when accessing cargo. Powder coated steel is sturdy and corrosion resistant.Features: Custom fit is designed specifically for your vehicle Fully welded carbon steel construction ensures strength and durability Bolt-on installation - no welding required Complete hardware kit and installation instructions included Lifetime technical support from the experts at etrailer.com Matte black powder coat finish offers superior rust resistance Ball mount, pin and clip sold separately Specs: Receiver opening: 2" x 2" Rating: Class III Maximum gross trailer weight : 4,000 lbs Maximum GTW when used with weight distribution: 5,000 lbs Maximum tongue weight : 400 lbs Maximum TW when used with weight distribution: 500 lbs Limited lifetime warranty
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Textured black powder coat over e-coat shields against rust and corrosion.We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Durable matte finish resists rust and creates a rugged look.We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Leaf-spring mounting kit includes 3-3/4" tall front hangers, 3-3/8" tall center hangers, 5-1/6" tall rear hangers, and necessary hardware. Equalizers are 12" long. Components for mounting axle to springs sold separately.
This completely hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Rustproof stainless steel receiver easily removes when not in use.We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. ... We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals. O-ring on lid makes a watertight seal.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Designed for use with an existing factory tow package Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring on lid creates a watertight seal when lid is closed to keep out moisture and debris Marine-grade wiring resists water damage Spring-loaded, self-closing lid automatically covers connector Connector fits into factory socket mounting location on most newer vehicles Adapter brackets or standard mounting bracket (sold separately) also available Made in the USA Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
Add these 2 heavy-duty shock absorbers to your Roadmaster Comfort Ride kit for tandem-axle trailers (RM-2450) to upgrade the suspension on your triple-axle trailer. Mounting brackets and hardware are included. Fits 2-3/8" axles.Features: Add-on shock kit adapts your Roadmaster Comfort Ride system (RM-2450) for use with a triple-axle trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Limited Lifetime Warranty Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 2-3/8" diameter (typical 3,500-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 2 shocks 1-Year warranty
Trailer connector splices into your vehicle's existing wiring. Built-in magnet creates tight connection with an EZ Connector trailer-end plug (sold separately). O-ring makes a watertight seal. Face-to-face contacts mean no broken terminals.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring on lid creates a watertight seal when lid is closed to keep out moisture and debris Marine-grade wiring resists water damage Spring-loaded, self-closing lid automatically covers connector Simple installation Hardwires to existing wiring with included connectors Mounting bracket sold separately Made in the USA Specs: Wiring harness length: 4" Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Leaf-spring mounting kit includes 5-1/4" tall front hangers, 4-1/2" tall center hangers, 4-1/2" tall rear hangers and hardware. Equalizers are 24-5/8" long. Designed for use with 10,000-lb, general-duty Dexter axles.
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.Features: 7- and 4-Pole trailer connector with mounting bracket Has high-impact, ABS plastic construction Stainless steel spring for easy cover operation Rubber gasket provides weather-resistant design Includes mounting bracket for easy, snap-in socket installation Black, epoxy-coated steel construction Mounts to bumper with included screws Specs: Application: Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs Can be used to add a connector to 2003 and newer GM pickups and SUVs Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year limited warranty Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Quickly and easily install wheel bearing races and seals without destruction to race or axle housing. This set includes six discs that fit common bearing sizes.Features: Installs wheel bearing races and seals Set includes six discs to fit common bearing sizes Sizes include: 1.565", 1.75", 1.965", 2.325", 2.47", and 2.555"
Replace the Vault installation tool that came with your Dexter Vault hybrid lubrication system (K71-030-00). Helps you to re-install the Vault Trailer Buddy assembly on your hubs when doing maintenance or replacing any components.Features: Replace the Vault installation tool that came with your Dexter Vault hybrid lubrication system (K71-030-00) Helps you to re-install the Vault Trailer Buddy assembly on your hubs when doing maintenance or replacing any components Fits: Dexter Vault hybrid lubrication system: K71-030-00
Filters
