Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Scissor jacks on trailers can be used as levelers or stabilizers. They are just not meant to lift up the weight of the trailer so that would limit the amount of leveling they can do. I recommend also using leveling blocks #UF48-979051, or the ones…
view full answer...We have a couple tandem trailer fenders that are 10-3/4 inches wide like with the part #HP84VR and the #HP74VR which are both 72 inches in length but at the 68 inch length of the #HP64VR
view full answer...When using the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part #e27SR with the Single-Axle Trailer Hanger Kit for Double-Eye Springs part #APS4 you will need to space the leaf spring hangers 25-3/4" apart.
view full answer...I attached the chart you referenced and it states that when you use a #e54SR spring with a hanger kit part #APS3 the hanger distance should be 24-7/8 inches. The length of a spring when new and not installed on a trailer will be slightly shorter than…
view full answer...The Jeep-style trailer fender you referenced, Redline Single Axle Steel Trailer Fender #J10821, does fit 10-inch wheels and is a weld-on application. Your tire size, 20.5 x 8 - 10, has a modern metric size equivalent of 205/65-10 and this size fits a…
view full answer...Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…
view full answer...Your statement (I have heard others say that you should never mix marine grease with general purpose grease, but mixing different brands of marine grease wont hurt.) sums up the way I have used grease all of my life. Being raised around all kinds of…
view full answer...The reverse lockout solenoid wiring of your #DM62VR is not polarity specific. This means that you can use either as the power wire or the ground from your reverse light circuit. As long as one has power and the other ground you are good.
view full answer...I looked on Demco's website and was able to pull some information and diagrams on how you would mount the Demco Hydraulic Brake Actuator item #DM8609101. I have attached them below. I was not able to find any pictures of this Actuator installed.…
view full answer...Thanks for the pictures! The Titan Zinc-Plated Brake Actuator item #T43397007K fits a 3" wide channel, can fit 2 inch or 1-7/8 inch hitch balls, and has a 7,000 lbs capacity. It is by far the best option to replace your old Titan Brake actuator.…
view full answer...We have the mounting brackets you will be needing to mount the CE Smith Single Axle Trailer Fender, #CE17937G. The CE Smith Brackets for Trailer Fenders, #CE26098G-2, will allow you to connect the CE Smith fenders to your trailer. The brackets, like…
view full answer...Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…
view full answer...Filters
3030 results