This bearing and race kit has everything to replace the bearings on 1 wheel of your trailer axle rated for 3,500 lbs. Works with Lippert, Dexter, or AL-KO 3,500-lb axles with #84 spindle.
The EZ Jack is an easy-to-use, safe and reliable device that functions as a jack for changing tires on dual-axle trailers. It also serves as a wheel chock or a level. It supports up to 20,000 lbs yet weighs just 11 lbs for easy handling and storage.Set the unit in front of the tire, with the narrow lip under the tire, and drive your RV forward until the motor home is level. EZ-100EZ Jack by Blaylock Industries
This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle. Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer.
Trailer axle measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.
Trailer axle measures 95" from hub-face-to-hub-face and 80" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.
The WirelessAIR kit lets you adjust any brand of push to connect air helper springs from inside or outside your cab with the hand-held controller or your smart phone. Dual-path system inflates 2 air springs to different pressures. Includes EZ Mount.Features: Air tank and compressor system includes everything you need to run and adjust 2 air springs independently with remote control or smart phone Level your vehicle front-to-back Get side-to-side leveling of off-center loads by inflating each spring with a different amount of air Automatically maintains the air pressure that you set Adjusts air pressure to stay within 3 psi of your pre-set level Senses when air pressure falls below a safe level and instantly acts to restore pressure Uses wireless control to adjust air pressure and run diagnostics from inside your cab Bluetooth compatibility and mobile app turn your smart phone into a system controller Wireless remote provides traditional control Provides 3 programmable pressure settings for frequently hauled loads Delivers advanced diagnostic reports, ensuring vehicle safety Notifies you of leaks or compressor failure Allows you to monitor each spring with built-in, digital air pressure gauges Black powder coated auxiliary air tank holds 2 gallons of compressed air to feed your air springs Compressor includes thermal overload protection EZ Mount comes pre-assembled with 3 key features Black powder coated steel mounting bracket Heavy-duty compressor Integrated manifold No need to run lines or wires to the cab Drill-free U-bolt allows for vertical or horizontal mount to the frame rail Kit includes air tank, compressor, weather-resistant manifold, wireless remote, mobile app, wiring harness, mounting bracket, and air lines Works with all brands of push to connect air helper springs Factory tested to be leak free Specs: Compressor: PSI: 200 Flow rate: 1.76 CFM Power: 13.8 V Duty cycle: At 72 F and 100 PSI: 100% At 72 F and 200 PSI: 50% 60-Day money-back guarantee Limited lifetime warranty
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 7,000 lb trailer axle (commonly 6,000 lb axles). Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer.
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.
The WirelessONE kit lets you adjust any brand of push to connect air helper springs with the hand-held controller or your smart phone. Single-path system inflates 1 pair of air springs to equal pressure. Includes EZ Mount.Features: Air tank and compressor system includes everything you need to run and adjust 1 pair of air springs with remote control or smart phone Maintains equal air pressure in both springs for front-to-back leveling Automatically maintains the air pressure that you set Adjusts air pressure to stay within 3 psi of your pre-set level Senses when air pressure falls below a safe level and instantly acts to restore pressure Uses wireless control to adjust air pressure and run diagnostics from inside your cab Bluetooth compatibility and mobile app turn your smart phone into a system controller Wireless remote provides traditional control Provides 3 programmable pressure settings for frequently hauled loads Delivers advanced diagnostic reports, ensuring vehicle safety Notifies you of leaks or compressor failure Black powder coated auxiliary air tank holds 2 gallons of compressed air to feed your air springs EZ Mount comes pre-assembled with 3 key features Black powder coated steel mounting bracket Heavy-duty compressor Integrated manifold No need to run lines or wires to the cab Drill-free U-bolt allows for vertical or horizontal mount to the frame rail Kit includes air tank, compressor with thermal overload protection, weather-resistant manifold, wireless remote, mobile app, wiring harness, mounting bracket, and air lines Works with all brands of push to connect air helper springs Factory tested to be leak free Specs: Compressor: Max PSI: 200 Duty cycle at 72 F and 100 PSI: 100 percent Combined flow rate at 0 PSI and 13.8 volts: 3.53 CFM 2-Year limited warranty
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter EZ-Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Hub is designed for use on trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Trailer axle measures 95" from hub-face-to-hub-face and 80" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and nuts included.
Hub is designed for use on trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.
Galvanized idler hub assembly is great for marine use. Fits 2,200-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and galvanized lug nuts included.This 500-hour salt spray rating indicates that a product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater. E-Z Lube-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 6,000 lb axles. Includes inner and outer bearings and races, double-lip grease seal, cotter pin, and EZ lube spindle washer.
Replacement #84 E-Z Lube spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Grease zerk makes greasing easy. Flange lets you attach a brake assembly. Castle nut, washer, and cotter pin included.Features: Tapered spindle replaces a worn or damaged #84 E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Mounting flange lets you bolt on a brake assembly Weld-on installation Sturdy steel construction Castle nut, tang washer, and D-washer included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 1-3/4" diameter x 4-1/4" long Overall spindle length: 9" Brake flange configuration: 4 bolt Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU74FR 1,750 lbs 1.75" 1.719" 1.378" 1.063" 1.00" 4.25" Round - E-Z Lube and Brake Flange
Ideal for saltwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 5/8" bolts.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. Zinc plating typically begins to deteriorate after about 100 hours. Dacromet usually lasts for around 300 to 400 hours. DeeMaxx's Maxx coating lasts for more than 1,000 hours in the salt spray test.
When you're parked on full hookups for weeks, black tank dumping gets tiresome. This bypass valve switches between tank and direct-to-sewer modes for upper-level RV bathrooms, so you can use a residential-style toilet with less tank maintenance.
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 7,000 lb trailer axle. Includes inner and outer bearings and races, seal, cotter pin, and washer for EZ lube spindle.
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.Features: Roof vent has a fan that pushes stale air out of your RV, camper, or enclosed trailer Vent allows air to circulate while your RV remains locked and secure 12V DC, 8-blade, single-speed fan On/off switch is mounted to vent Fan rotates counterclockwise Easy-to-use handle lets you quickly open and close the vent from inside your RV Spring-loaded handle locks into 10 different positions No gears - opens vent faster than a standard crank handle or hand knob Ergonomic T-shape is easy to grip Aerodynamic, wedge-shaped dome (or lid) is made of durable smoke-colored polypropylene Translucent dome allows some light through Polar white screen snaps out for easy cleaning Vinyl weather seal helps keep water out when vent is closed Manual lift design White, 1/4" thick mounting flange is built in UV-resistant, long-lasting specialty polymer plastic construction Smooth edges won't cut you during installation Works well with all roofing materials 2-Wire design Black wire is power White wire is ground Interior trim piece (or garnish) and installation kit sold separately 4 Mounting points on flange allow for installation of a vent cover (sold separately) Made in the USA Specs: Rough opening size: 14-1/4" wide x 14-1/4" long Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long Vent extends above roof: 4" When closed 9-1/2" When fully open Overall fan diameter: 5" Fan shaft diameter: 0.091" Fan capacity: 100 CFM Power draw: 1.2 amps Limited 2-year warranty Note: Not for use above tubs, showers, or range cooking surfaces. Spring-Loaded Handle on Ventline E-Z Lift Ventadome The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV.
Perfect for large RVs, these dual-fuel, 4,500-watt inverter generators combine to start and run (2) 15,000 Btu ACs and more using gas or propane. Portable, dual setup is great for power outages or RV parks without hookups. Electric-start operation.The LED power meter on the right displays the power output in percent (%) with 100% at the top. Built-in Safety Features 1. Low Oil Shut-Off Sensor: If the oil level is too low for safe use, the indicator will flash letting you know there is an issue with the oil level.
Filters
