The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers ... with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailerbrakes Overall dimensions: 5" long x 3-1/2" wide x 1-3/8" tall LCD display dimensions
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough ... Outback, it can take anything, mate Specs: For trailers with up to 3 axles (6 brake assemblies) Compatible with electric or electric-over-hydraulic trailerbrakes Control knob dimensions: 1-7/8" long x
... installation with no wiring. Built-in reverse polarity and short circuit protection Weather-resistant - Sealed against moisture Specs: Application: trailers with 1 to 2 axles (4 brake assemblies) Compatible with electrictrailerbrakes
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics. between vehicles Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailerbrakes Dimensions: 5-1/8" long x 3-1/8" wide x
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate ... Vehicle-specific harness included Made in Australia - If it can take the Outback, it can take anything, mate Specs: Application: trailers with up to 2 axles (4 brake assemblies) Compatible with electric or
This proportional brake controller has simple controls and a digital display for diagnostic information. Includes 3 boost levels, a slide-bar manual override, built-in battery protection, automatic ... Mounting bracket and hardware included Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with electricbrakes only Dimensions: 5" long x 4-3/8" wide x 2-1/2" tall
Electric
Proportional Controller
Tekonsha
Under-Dash
Splice-In
Under-Dash Box
LED Display
Single Trailer Only
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate ... : trailers with up to 2 axles (4 brake assemblies) Compatible with electric or electric-over-hydraulic trailerbrakes Main unit dimensions: 4" long x 3-3/8" wide x 1-1/8" tall Control knob
The built-in charger in this kit keeps the battery charged and ready to bring your single-axle or tandem axle trailer to a complete stop should it become disconnected from your vehicle. LED tester ... durable, plastic case Includes breakaway switch, charger, battery, battery box, and wiring Specs: Application: single- and tandem-axle trailers with electricbrakes Battery: Voltage: 12V Type: lead acid
This universal wiring kit lets you install an electricbrake controller (sold separately) in your vehicle and a 7-way connector for your trailer lights at the same time. Plugs into the existing 4-way ... Features: Universal kit includes wiring and hardware required for installation of a trailerbrake controller (sold separately) Designed for use on a vehicle with an existing 4-way flat trailer
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road ... and gives you more control than hydraulic brakes Requires only an electricbrake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality
Replace the damaged 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs in beneath your dash and lets ... your vehicle's wiring matches that of your trailerWiring adapter eases installation of your electricbrake controller Custom connector end plugs into the built-in port near the dash of your vehicle
This breakaway kit brings your trailer to a safe stop by applying the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges battery (sold separately ... Hardware not included Kit includes breakaway switch, 0.5-amp charger, battery box, and wiring Specs: Application: one-axle or two-axle trailers with electricbraking systems Charger amperage: 0.5 amps
Each Wire is 12 Gauge Sold per foot Duplex BrakeWire is made with two plastic insulated primary wires laid parallel and covered with a high quality plastic jacket, protecting the insulated
This proportional brake controller is designed to keep towing simple. Includes an LED braking indicator, a slide-bar manual override, and a knob to adjust braking power. Mounts easily within a ... , vehicle-specific brake-control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electricbrakes
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a ... mounting hardware Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electricbrakes Battery capacity: Voltage:12V Type: sealed lead-acid
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged ... Features: Makes sure your trailer safely stops if it ever separates from your vehicle Activates your trailer's electricbrakes if the trailer disconnects from the tow vehicle Automatically
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electricbrakes only Dimensions: 4-1/4" long x 2-3/4" wide x 1-1/8" tall Mounting range: 360 degrees vertically Limited
This kit includes a junction box so you can quickly and easily connect the wires from the included trailer connector to your trailer's wiring.Features: Kit allows you to upgrade from a 4-way, 5-way, or 6-way connector to a 7-way connector Pre-wired, 7-way, blade-style, trailer-end connector lets you connect your trailer to your vehicle
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates. Fits 13", 14" ... and gives you more control than hydraulic brakes Requires only an electricbrake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer excellent braking
The built-in charger in this kit keeps your battery charged and ready to bring your single-axle or tandem-axle trailer to a complete stop should it become disconnected from your vehicle. LED tester ... , 5-amp-hour battery, battery box, and wiring Department of Transportation (DOT) compliant Specs: Application: single-axle and tandem-axle trailers with electricbrakes Battery: Voltage: 12V Type: lead acid
This combination of 2 heavy-duty 10-gauge wires, jacketed individually and then together, is perfect for installing a trailerbrake controller on a vehicle. Sold per foot. power back for the trailerbrakes, while the other is connected directly to the vehicle battery for an auxiliary power supply pin in the trailer connector. Having both wires in the same jacket makes
This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for ... : Application: trailers with up to 2 axles (4 brake assemblies) Compatible with electrictrailerbrakes only Dimensions: 5" long x 3" wide x 1-1/4" tall Limited 5-year warranty Easy-to-Access Brake
10-gauge wire Often used to run brake signal from brake controller to trailer connector on vehicle and from trailer connector to electricbrakes on trailer Standard Copper Primary Wire is widely used
Filters
