Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, the Kodiak Disc Brake Kit item #K2HR35DS. Those are 10" Hub/Rotor with a 5 on 4-1/2 bolt pattern that will fit 14"-15" wheels. The hubs are corrosion resistant with a dacromet plating. They are sold in pairs so you will need to…
view full answer...The 46304 calipers are used on axle capacities between 3,500 and 6,000 lbs so that's not quite enough info to determine what seal you'd need. If you have a 3,500 lb axle you'd need the seal kit part #RG06-050. Now if you have a 5,200-6k…
view full answer...We have received reviews that the DeeMaxx Disc Brake Caliper #DE86VR worked as a replacement for the brake calipers on a Tiedown disc brake setup. Do understand we have not tested them for fitment or can guarantee fitment for every Tiedown disc brake…
view full answer...If your trailer axle doesn't currently have brake mounting flanges you have a couple of options, one of which is to simply weld on flanges like you mentioned. A brake mounting flange needs to be welded perfectly square and concentric, which…
view full answer...The difference between all of these different actuators in the amount of pressure that it sends to the brakes, since different braking setups require different pressures to engage them. Since disc brakes require 1600-psi of pressure to activate the…
view full answer...Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…
view full answer...I did some checking and your 7K Lippert axles use inner bearing 25580 and outer bearing 14125. We have 7K brake kit options that use these same bearings and have the same 8 on 6-1/2 bolt pattern as your existing hubs. The most basic kit is #K2HR712.…
view full answer...The Kodiak Disc Brake Kit part #K2R526D is compatible with pretty much any idler hub with a 6 on 5-1/2" bolt pattern therefore you won't have any issues with the CE Smith Trailer Idler Hub Assembly part #CE13711. I have attached an install…
view full answer...The 4 bolt brake mounting flanges are used on axles up to 3,500 lbs. If the axle is any larger then it will likely use a 5 bolt flange. There is one exception to this which is select 4,400 lb axles. That said, you cannot use 4 bolt brakes with 5 bolt…
view full answer...The best option to replace your Tie Down Engineering Model LP80 actuator is the Dexter DX7.5 Drop-N-Go Brake Actuator item #099-175-20 you were looking at. This actuator has a 7,500 lbs capacity and is rated for disc brakes. It fits a 2" hitch…
view full answer...The Tie Down Engineering (TDE) Brake Actuator 48980 also known as the 80LP/85LP is a 8,000 lb or 8,500 lb disc brake actuator with 2" coupler. In order to replace this, the best option we have is the Demco Hydraulic Brake Actuator part…
view full answer...Hey Travis, While we haven't tested DeeMax's compatibility to TDE we have been receiving reviews from people that have tried and found them to be a fit. One review states that they successfully replaced their TDE 46304 calipers with the…
view full answer...Filters
- 1826 results
Related Searches