... ring. Includes backingplate and mounting hardware. over the ring without interference Included backingplate provides greater support than mounting the anchor directly to wood Zinc-plated steel construction resists corrosion and retains its strength
... backingplates and hardware. WLL is 2,000 lbs per D-ring. recessed portion of the D-ring to sit inside Backingplates attach directly under D-ring anchors and on the opposite side of the mounting surface 16 Nuts, 16 lock washers, and (16) 5/16" x 2-1/4"
This sturdy D-ring serves as an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated ... rotate D-ring so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Backingplate
... backingplate and hardware. WLL is 400 lbs. design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Backingplate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel
... included backingplate and hardware. WLL is 265 lbs. gasket helps to create a seal against dirt and water when D-ring is surface mounted Also reduces corrosion and oxidation Backingplate reinforces the surface of your trailer where the tie-down is attached
Zinc-plated, corrosion-resistant steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. Built-in bolt allows for easy attachment to your ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords D-ring rotates 180 degrees so you can attach straps from multiple angles Included backingplate and
D-Ring
Trailer Tie-Down Anchors
Truck Tie-Down Anchors
Tie-Down Cleats and Rings
Surface Mount - Bolt-On
2000 lbs
Brophy
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
... included backingplate and hardware. WLL is 265 lbs., bolt-on installation on flat surface Backingplate attaches directly under D-ring anchor and on the opposite side of the mounting surface 2 Nuts, 2 lock washers, and (2) 1/4" x 2-1/4" bolts
Zinc-plated steel backingplate reinforces a Brophy recessed D-ring tie-down anchor (RR05). Plate bolts on underneath the floor of your trailer to reinforce the area under the anchor for maximum ... Features: Backingplate reinforces the area where a Brophy recessed D-ring tie-down anchor (RR05) is mounted More secure installation means that the anchor is well supported Helps ensure that anchor
Tie-down reinforcement plate for recessed swivel trailer tie-downs. The plate is is placed under the surface of the tie-down location to offer greater support than just the wood.
This zinc-plated steel backingplate reinforces the tie-down anchors of your cargo control system. The sheet bolts onto the surface of your trailer and sits under the anchor for maximum support.Features: Backingplate reinforces the area around where your tie-down anchor is mounted Sits under the anchor for maximum support (RR01-C, RR02, or SR10-C - sold separately) Zinc-plated steel
Backingplate lets you install your Brophy bolt-on D-ring tie-down anchor (DR01 - sold separately). Powder coated steel construction resists corrosion.Features: Backingplate provides mounting point for your Brophy D-ring tie-down anchor (DR01 - sold separately) D-ring bolts onto plate Black powder coated steel resists corrosion Made in the USA
This sturdy D-ring anchor bolts onto a backingplate (BP1D - sold separately) to create an attachment point for tie-down straps and bungee cords wherever you need cargo control. Zinc-plated steel ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords Requires backingplate (BP1D - sold separately) for installation D-ring rotates 180 degrees so you
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. Zinc plating provides ... with straps or bungee cords D-ring pivots 90 degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Zinc-plated steel construction
Sturdy D-ring provides a solid attachment point for tie-down straps and bungee cords wherever you need cargo control. Simply bolts onto any flat surface. No need to cut a mounting hole. Zinc-plated ... design No need to cut a hole in your trailer or truck bed D-ring rotates 180-degrees so you can attach straps from multiple angles Zinc-plated steel construction resists rust and corrosion Optional backing
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for ... backingplate provides greater support than if the anchor was mounted alone (sold separately - BP05) Specs: Maximum load (break strength): 5,000 lbs Working load limit: 1,600 lbs. Anchor: Bezel dimensions
This durable steel D-ring creates an attachment point for rope, tie-down straps, or bungee cords wherever you need cargo control. The corrosion-resistant zinc-platedring sits in a plastic bezel and ... sits recessed in a plastic bezel, allowing cargo to slide over it D-ring rotates so you can attach rope from multiple angles Zinc-plated steel resists corrosion and retains its strength through repeated
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more. holes (center to center): 2" Limited lifetime warranty Notes: It is recommended that you use a backingplate (sold separately) for trailers with thin walls. Use all mounting holes on this E Track for
48" Long. This handy E-track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E-track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more. lifetime warranty Notes: It is recommended that you use a backingplate (sold separately) for trailers with thin walls. Use all mounting holes on this E-track for optimal installation. This handy steel
94" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.; Limited lifetime warranty Notes: It is recommended that you use a backingplate (sold separately) for trailers with thin walls. Use all mounting holes on this E Track for optimal installation. This handy
5' E track rail lets you create anchor points on the wall or floor of your trailer or in your workshop. Multiple slots accommodate straps, tie-down anchors, hooks, and other E track accessories. 6,000 lbs Max load.; Limited lifetime warranty Notes: It is recommended that you use a backingplate (sold separately) for trailers with thin walls. Use all mounting holes on this E Track for optimal installation. This handy
60" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.; Limited lifetime warranty Notes: It is recommended that you use a backingplate (sold separately) for trailers with thin walls. Use all mounting holes on this E Track for optimal installation. This handy
36" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.; Limited lifetime warranty Notes: It is recommended that you use a backingplate (sold separately) for trailers with thin walls. Use all mounting holes on this E Track for optimal installation. This handy
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more. mounting holes (center to center): 2" Limited lifetime warranty Notes: It is recommended that you use a backingplate (sold separately) for trailers with thin walls. Use all mounting holes on this E
60" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.; Limited lifetime warranty Notes: It is recommended that you use a backingplate (sold separately) for trailers with thin walls. Use all mounting holes on this E Track for optimal installation. This handy
Filters
