You plug in your trailer and the connection holds steady, no flickering lights, no loose fit. It replaces worn or damaged sockets so your wiring stays consistent every time you hook up.Highlights 7 Way Blade Socket: Standard vehicle-side connector for trailer wiring. Integrated Mounting Bracket: Secures socket to a fixed mounting point. Plastic Protective Cover: Helps prevent debris and moisture buildup.
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. ... Once you've installed the mounting bracket, take the dust cap off the connector. Slide the connector into the mounting bracket until you feel it click into place. Pop the dust cap back on, and you're good to go.
This kit provides a 7-pole, RV-style trailer connector, wiring harness and mounting bracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.Features: Replacement 7-pole, sealed socket, RV-style trailer connector with pigtail and mounting bracket High-impact nylon construction Resists corrosion 4' Long wiring harness Hard-wires into vehicle wiring system Has 1/2" convoluted tubing Forms weathertight seal on back of socket Keeps out moisture Prevents corrosion Includes color-coded, 7-wire leads that meet RVI standards Right-angle mounting bracket Convenient mount under rear bumper of truck or SUV Zinc-plated construction Black, epoxy coating Protects against rust and corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents leaks when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 12 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty
This 7- and 4-pole connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system with Chrysler/Dodge OEM plug adapter and bracket.Features: 7- and 4-Pole trailer connector with mounting bracket Has high-impact, ABS plastic construction Stainless steel spring for easy cover operation Rubber gasket provides weather-resistant design Mounting bracket for easy, snap-in socket installation Black, epoxy-coated steel construction Specs: Application: Replaces factory 7-way connector on trucks and SUVs Can be used to add a connector to 2003 and newer Chrysler and Dodge pickups and SUVs Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year limited warranty
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.Once installation is complete, the connectors will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket is included to keep the connectors secure. It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 7-pole and 4-pole connectors - to help prevent corrosion.
Mount your EZ Connector socket or standard 7-way vehicle-end connector with this mounting bracket. Heavy-duty aluminum is durable. Includes mounting screws.Features: Electrical bracket lets you mount your trailer connector on your vehicle quickly and easily Compatible with EZ Connector socket or standard 7-way connector Heavy-duty aluminum construction 4 Stainless steel mounting screws included Made in the USA Specs: Overall dimensions: 3-3/8" wide x 4-1/4" tall x 1-5/8" deep Diameter of mounting hole: 2-1/8"
This heavy-duty bracket allows you to mount a trailer connector socket to your tow vehicle in three separate ways. Bracket fits under your hitch ball or under the hitch tongue, or it can be attached directly to the vehicle frame.Features: Connectorbracket for mounting trailer connector socket Typical mounting options Under the hitch ball In 2-hole frame mount Under the hitch tongue Heavy-gauge construction with black zinc coating Protects against rust and corrosion Specs: Fits Pollak socket models: PK12720 and PK11609 Overall dimensions: 5-3/4" wide x 2-5/16" tall x 1-3/4" deep Diameter of largest mounting hole: 1-15/16" 1-Year limited warranty
Attach your trailer connector mounting bracket to your vehicle without having to drill. Just affix this sturdy steel bracket to your trailer hitch with the included hose clamp, and then quickly and easily bolt on your connectorbracket.Features: Attaches to trailer hitch to provide mounting point for 6-pole round or 7-pole round trailer connectorbracket (sold separately) Provides space necessary to mount large trailer connector Offers a no-drill solution for mounting your trailer connectorbracket Installs with included hose clamp Wrap strap around trailer hitch and through attachment bracket Tighten down for sturdy mounting Constructed of durable steel Resists corrosion with black powder coat Includes hardware for affixing trailer connectorbracket Measures 3" wide x 6-1/2" long Limited lifetime warranty Specs: Overall dimensions: 3" wide x 6-5/8" tall x 7/8" deep Diameter of mounting hole: 1" x 1-5/8" Strap length: 14" This will fit around a hitch tube up to 3-1/2" in diameter
Attach your trailer connector mounting bracket to your vehicle without having to drill. Just affix this sturdy steel bracket to your trailer hitch with the included hose clamp, and then quickly and easily bolt on your connectorbracket.Features: Attaches to your trailer hitch to provide mounting point for a 4-, 5- or 6-way trailer connectorbracket (sold separately) Offers a no-drill solution for mounting your trailer connectorbracket Installs with included hose clamp Wrap strap around trailer hitch and through attachment bracket Tighten down for sturdy mounting Constructed of durable steel Resists corrosion with black powder coat Specs: Dimensions: 3" wide x 3-7/8" long 1-Year limited warranty
This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.Features: Adapts 4-way flat to both 7-way RV and 4-way flat 4-Way flat output connects tail lights, brake lights, and turn signals 7-Way connects tail, brake, reverse, turn signals, and auxiliary power Dust covers keep connectors clean when not in use Split loom keeps wires contained and well protected Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way Included hardware and metal mounting bracket secures wiring to the vehicle or trailer hitch 1-Year limited warranty Specs: Distance between bracket mounting holes center to center: 2-1/4" Harness length: 17" Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground
This vehicle-end connector converts any 4-way flat, vehicle-end plug to a 7-blade RV connector outlet.Includes mounting bracket and hardware 1-Year limited warranty
Easily connect either a 7-way or 4-way trailer-end connector with this dual-outlet socket. Simply plug this into your vehicle's OEM USCAR wiring system and mount it with the included bracket.Features: Provides a 4-way and 7-way socket for your trailer connector Fits USCAR-equipped vehicles with factory tow plugs 4-Way flat output connects tail lights, brake lights and turn signals 7-Way RV blade socket adds reverse lights, electric brakes and auxiliary power Rubber gasket keeps moisture and debris out Spring-loaded dust covers keep connectors clean when not in use Pre-greased terminals offer a reliable connection Mounting bracket lets you attach socket to your hitch or bumper High-strength steel has durable, gloss black powder coat Mounting screws included 1-Year limited warranty
You switch between trailers and want less hassle. One connector at the vehicle keeps hookups quick so you can plug in and go without hunting for parts.Highlights Dual Sockets: 7 Blade and 4 Flat in one connector. Vehicle-End Connector: Plugs available at the vehicle side. Full Signal Support: Brake, turn, tail, electric brake, auxiliary, reverse, ground.
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom harness. Connector plugs directly into existing tow connector on your truck - limited cutting, splicing, and tapping required.The included zip-ties and protective loom help you route the wiring cleanly along factory lines, keeping it out of sight and out of trouble from snags or heat. Mount It Where You Need It: Optional Bracket Available Separately Want a cleaner, more secure install? You can pair this harness with Curt mounting bracket C58000 (sold separately) to keep the connector fixed in place on your hitch or bumper.
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals. O-ring on lid makes a watertight seal.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Designed for use with an existing factory tow package Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring on lid creates a watertight seal when lid is closed to keep out moisture and debris Marine-grade wiring resists water damage Spring-loaded, self-closing lid automatically covers connectorConnector fits into factory socket mounting location on most newer vehicles Adapter brackets or standard mounting bracket (sold separately) also available Made in the USA Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.Features: Trailer connectors install at the back of your vehicle and at the front of your trailer to power your trailer's signal lights Powerful magnet in socket joins with magnet in plug to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Double silicon O-ring on plug creates watertight seal with socket to keep out moisture and debris Water-block powder in cable keeps moisture away from wiring Plug holder and dummy plug keep terminals from becoming exposed when connectors are not in use Simple installation Hardwires to existing vehicle and trailer with included connectors Thumb notch on plug allows for easy alignment Twist plug until tabs line up and connector snaps into place Vehicle-end connector fits into factory socket mounting location on most newer vehicles Standard mounting bracket included Adapter brackets (sold separately) also available Made in the USA Specs: Trailer-end cable length: 4' Vehicle-end wiring harness length: 2' Wiring configuration: White: ground Red: left turn Brown: right turn Black: auxiliary power Green: tail lights Yellow: reverse lights Blue: brakes Wire gauges: 14 Gauge: red, brown, green, and yellow 12 Gauge: blue 10 Gauge: white and black Limited lifetime warranty These connectors give you the functionality of a 7-way connection, but without any pins or blades to bend or break.
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring in socket creates a watertight seal when connected to keep out moisture and debris Marine-grade wiring resists water damage Dummy plug inserts into socket when connector is not in use to protect contacts from dirt and debris Quick and easy installation - no cutting or splicing Locate connection points behind rear bumper Plug in connector Standard mounting bracket included Adapter bracket (sold separately) also available Made in the USA Specs: Wiring harness length: 2' Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.Features: Trailer connectors install at the back of your vehicle and at the front of your trailer to power your trailer's signal lights Powerful magnet in socket joins with magnet in plug to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Double silicon O-ring on plug creates watertight seal with socket to keep out moisture and debris Water-block powder in cable keeps moisture away from wiring Plug holder and dummy plug keep terminals from becoming exposed when connectors are not in use Quick and easy installation Plug wiring harness into vehicle - no cutting or splicing of wires Hardwire trailer-end plug to existing trailer wiring Vehicle-end connector fits into factory socket mounting location on most newer vehicles Standard mounting bracket included Adapter brackets (sold separately) also available Made in the USA Specs: Trailer-end cable length: 4' Vehicle-end wiring harness length: 2' Wiring configuration: White: ground Red: left turn Brown: right turn Black: auxiliary power Green: tail lights Yellow: reverse lights Blue: brakes Wire gauges: 14 Gauge: red, brown, green, and yellow 12 Gauge: blue 10 Gauge: white and black Limited lifetime warranty These connectors give you the functionality of a 7-way connection, but without any pins or blades to bend or break.
Quickly and easily install a 6-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.Once installation is complete, the connectors will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket is included to keep the connectors secure. It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 6-pole and 4-pole connectors - to help prevent corrosion.
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring in socket creates a watertight seal when connected to keep out moisture and debris Marine-grade wiring resists water damage Dummy plug inserts into socket when connector is not in use to protect contacts from dirt and debris Quick and easy installation - no cutting or splicing Locate connection points behind rear bumper Plug in connector Standard mounting bracket included Adapter bracket (sold separately) also available Made in the USA Specs: Wiring harness length: 2' Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.Features: Trailer connectors install at the back of your vehicle and at the front of your trailer to power your trailer's signal lights Powerful magnet in socket joins with magnet in plug to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Double silicon O-ring on plug creates watertight seal with socket to keep out moisture and debris Water-block powder in cable keeps moisture away from wiring Plug holder and dummy plug keep terminals from becoming exposed when connectors are not in use Quick and easy installation Plug wiring harness into vehicle - no cutting or splicing of wires Hardwire trailer-end plug to existing trailer wiring Standard mounting bracket included Adapter brackets (sold separately) also available Made in the USA Specs: Trailer-end cable length: 4' Vehicle-end wiring harness length: 2' Wiring configuration: White: ground Red: left turn Brown: right turn Black: auxiliary power Green: tail lights Yellow: reverse lights Blue: brakes Wire gauges: 14 Gauge: red, brown, green, and yellow 12 Gauge: blue 10 Gauge: white and black Limited lifetime warranty These connectors give you the functionality of a 7-way connection, but without any pins or blades to bend or break.
Features: Mounts your 7-way RV blade connector socket securely against your hitch frame Flexible mounting options High-strength steel construction Durable gloss black finish resists rust and corrosion Dimensions: 3-3/4" tall x 2-3/4" wide Limited lifetime warranty Specs: Overall dimensions: 2-3/4" wide x 3-11/16" tall x 1-3/8" deep Diameter of mounting hole: 2-1/8"
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. ... Features: Electrical bracket lets you mount your trailer connectors to your hitch quickly and easily Holds (1) 6-way or 7-way round connector and (1) 4-way or 5-way flat connector Fits 2" x 2" trailer hitch receivers Sturdy steel construction is long-lasting Black powder coat finish resists corrosion Notched design allows for access to pin and clip or hitch lock Fast, simple, no-drill installation Fit bracket over hitch receiver opening and secure around lip with included hardware Dimensions: 10" long x 3-1/4" tall Edge is 1-5/32" at widest point Specs: Overall dimensions: 10-1/2" wide x 3-1/4" tall x 1-1/8" deep Diameter of mounting hole: 2-1/16"
Mounting bracket for 4- and 7-way standard connectors. Includes screws.Features: Mount your 4-way flat and 7-way RV blade connector socket securely against your hitch frame Works with Curt dual trailer connector (C42JR) and most OE-style 4- and 7-way connectors Flexible mounting options High-strength steel construction Durable gloss black finish resists rust and corrosion Limited lifetime warranty
Filters
