Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Cody! The brake controller I recommend for your setup is the Redarc Tow-Pro Liberty Brake Controller #RED74CR. The Liberty is simple, reliable, and has a really clean look once installed. The main unit is hidden so the only thing you see is the…
view full answer...Hello Larry; are you sure the brackets are 18" across as seen in the picture below? Looking at the parts listed from Grand Design the Reflection 362TBS has the MaxxFan 4951. This will have the mounting tabs that allow you to mount the MaxxAir…
view full answer...The Classic Accessories Toy Hauler Screen part #052963799842 is adjustable so it will accommodate the narrower opening. However, the screen measures 90-1/2 inches tall so you may have a small gap at the bottom. This is the closest Toy Hauler Screen…
view full answer...Yes, the bayonet fitting of the part #CAM39863 that you referenced will fit the bayonet style fitting of the #CAM39761.
view full answer...You can store your travel trailer parked on an incline for storage, and it does not have to be perfectly level; you wouldn't want to use leveling blocks as the trailer would slide. On a big incline I highly recommend using heavy-duty rubber…
view full answer...We don't carry in wall RV refrigerators like your Dometic DM2652 RBX so the closest compatible refrigerator we carry would be the Everchill RV Refrigerator w/ Freezer #324-000119. The dimensions I found for your current refrigerator show it being…
view full answer...I'd be more than happy to help you out! You're going to need a complete setup like what you find on an RV for what you're needing to do. This is based off of a battery bank but the power will be provided by the various methods you…
view full answer...Those three regulators are all very similar and essentially do the same thing but they're used on different propane setups. Part #37207-30365 is a vertical regulator. Vertical regulators are commonly on propane systems on travel trailers or pop…
view full answer...Both the ProPride 3P part #PR57QR and the B and W Continuum part #BW78FR allow backing up and work extremely well but since there isn't a ProPride system that would be ideal for the tongue weight of your Winnebago Minnie FLX2306 I would go with…
view full answer...As long as you do not exceed the 15,000 lb gross trailer weight (GTW) and 1,500 lb tongue weight (TW) rating of the Curt Weight Distribution Shank part #C17122 then you should have no problems switching from a 9" long shank to a 14" long…
view full answer...The B&W Continuum Weight Distribution System part #BW78FR is not compatible with any other weight distribution system shank. The hole spacing on the shank for the head adjustment is 1-1/2" on center which is more than the 1-1/4"…
view full answer...The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…
view full answer...