... Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Replaces the side-loading battery box that came with your Curt Soft Trac I trailer breakaway kit. The lockable lid screws down and has built-in rubber gaskets that help to keep water out. ... Features: Replaces the battery case that came with your Curt Soft Trac I breakaway kit (C52040 or C52041) Side-loading case is easy to access from the side Lockable lid deters theft Fastens using (4) 1/2" x 2-1/2" screws (not included) Locks using a padlock (sold separately) Weather-resistant polyethylene construction protects your battery from moisture and debris Rubber gaskets inside the lid keep water out Bolt-on installation Specs: Dimensions: 5" long x 3-3/4" wide x 3-3/8" tall 1-Year limited warranty
Replaces the battery box on your Dexter gel cell breakaway kit for BrakeRite systems (T4822100). Includes 1 battery box.Features: Replaces the battery box on your Dexter gel cell breakaway kit for BrakeRite systems (T4822100) Includes 1 battery box Specs: Outside dimensions: 6" long x 3-1/2" wide x 5-7/8" tall Mounting holes: Center to center vertically: 2-1/2" Center to center horizontally: 6-5/8" Inside dimensions: 5-1/16" deep x 5-5/8" long x 3-1/16" wide
Replaces the top-loading battery box that came with your Curt Soft Trac II trailer breakaway kit. The built-in mounting bracket allows for a no-drill installation on your trailer's frame or jack post. ... Features: Replaces the battery case that came with your Curt Soft Trac II trailer breakaway kit (C52028 or C52026) Top-loading case is easy to access from above Built-in mounting bracket offers easy installation - no drilling required Clamps onto your trailer frame or around your jack post May also be welded to the trailer frame Lockable with a padlock (sold separately) Weather-resistant polyethylene construction protects your battery from moisture and debris Specs: Dimensions: 5" long x 3-7/8" wide x 3-1/4" tall 1-Year limited warranty
This complete breakaway kit brings your trailer to a safe stop by activating the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges the included battery while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Battery box can be mounted on your trailer frame so you can open it from either above or the side Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on the box Kit includes breakaway switch, 0.5-amp charger, 5-amp-hour battery, battery box, and wiring Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 0.5 amps Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 5-1/4" long x 5" wide x 3-1/2" tall 1-Year limited warranty
Mount this system to your trailer jack with included U-bolts. Breakaway system brings your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. Includes sealed, lead-acid battery, and side-loading case.Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Mounts to the outside of your trailer's frame or to your jack post Side-loading case provides easy access to battery Mounts to jack post with included U-bolts or to trailer frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Rubber O-ring helps keep water out of the box Includes breakaway switch, battery box, wiring, and a 5-amp hour, lead-acid battery Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 14-1/2" Battery box dimensions: 5" long x 3-3/4" wide x 3-3/8" tall Battery box mounting hole spacing: From center to center vertically: 2-7/8" From center to center horizontally: 4-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Bring your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. Includes a charger that maintains battery so you're always ready for an emergency and U-bolts so you can mount it to your trailer jack.A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Unit flashes the lights on your single- or tandem-axle trailer while also activating its brakes if it disconnects from your vehicle. This way, not only will your trailer stop, but the flashing lights will also alert others on the road to the danger.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Boosts safety by also flashing your trailer's signal lights if disconnect occurs ICU system activates when breakaway cable detaches Automatically charges battery with built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case provides easy access to battery Self-tapping screws are sold separately Breakaway switch installs on your trailer's frame with self-tapping screws Protects the battery from rain and debris with durable, plastic case Rubber O-ring around lid helps keep water out of the box Wiring diagram is printed on the battery box lid Keeps wires neat with included wire loom Includes breakaway switch, charger, battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric brakes Breakaway cable length: 48" Charger amperage: 0.5 amps Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Push-to-test button lets you check the battery's state of charge LED lights indicate current battery status Green = fully charged Yellow = charging Red = recharge needed Top-loading case is easy to access from above Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Wire loom neatly contains and protects wires Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on box Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 4-3/4" long x 6" wide x 4-7/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
LED tester lets you easily check the battery's charge. The built-in charger in this kit keeps your battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a stop should it become disconnected from your vehicle.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Lets you test battery status with the push of a button Mounts on the inside of your trailer's frame Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects the battery from rain and debris with durable, plastic case Rubber O-ring in the lid helps keep water out of the box Drain holes in the bottom of the box help with venting and letting condensation drain Wiring diagram printed on the case's lid Includes breakaway switch, 2-amp charger, 10-amp-hour battery, battery box, and wiring Specs: Application: single-axle, tandem-axle, or triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 10 amp-hours Charger: Amperage: 2 amps Lead wire length: 38" Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 47" Battery box: Dimensions: 5" long x 8-7/8" wide x 5" tall Mounting hole spacing: From center to center vertically: 1-1/4" From center to center horizontally: 8-1/4" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
You're wiring a trailer with electric brakes and safety isn't optional. This breakaway kit gives the trailer with a backup plan. If it comes loose, the battery triggers the brakes. It's got everything you need to stay in control.Weather-Resistant Housing: Helps shield battery and wiring from road spray. Features to know about Breakaway Kit with Everything Included This TowSmart ProClass kit gives you the full setup for trailer breakaway protection. It includes the battery, box, switch, charger, and mounting hardware.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Before you tow, press the test button to confirm the breakaway battery is ready. The built-in charger keeps it charged while connected to the tow vehicle, so the kit is ready if separation happens.Specs Breakaway Kit: Kit type: side-load breakaway kit Breakaway cable length: 4' Charger amperage: 1 amp Included components: breakaway switch, charger, battery, battery box, wiring, wire loom Battery: Voltage: 12V Type: lead-acid Capacity: 5 amp-hours Battery Box: Dimensions: 3-3/4" long x 6" wide x 5" tall Material: plastic Lid seal: rubber O-ring Drainage: bottom drain holes Lock compatibility: padlock compatible, padlock sold separately TowTether Safety Cable: Quantity: 1 cable Material: braided stainless steel Working load limit: 150 lbs Length: 19" Thickness: 3/32" Brake system compatibility: electric or hydraulic Compliance: FMCSA 393.43 compliant for trailer breakaway systems
Use with your Dexter electric-over-hydraulic brake actuator to bring your single- or tandem-axle trailer to a stop should it become disconnected from your tow vehicle. System includes charger that maintains battery.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Designed for use with Dexter electric-over-hydraulic brake actuators (K71-650 and K71-651) Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge the battery Mounts to the inside of your trailer's frame or camper compartment Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, charger, battery box, breakaway switch, wiring, and breakaway cable Department of Transportation (DOT) compliant Made in the USA Specs: Application: single- and tandem-axle trailers Battery: Voltage: 12V Type: sealed lead acid Capacity: 9 amp-hours Breakaway cable length: 46" Breakaway switch dimensions: 3" long x 1-1/2" wide Breakaway switch lead wire length: 45" Charger lead wire length: 14" Battery box dimensions: 6-5/16" long x 3-3/4" wide x 5-3/4" tall Battery box mounting hole spacing: From center-to-center vertically: 3" From center-to-center horizontally: 7" Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
If your trailer breaks away from your tow vehicle, your brakes won't work unless they have power. This kit adds a battery and switch to keep the brakes working, and it's required by law on most trailers with EOH disc brakes.There's an LED tester on the lid that shows if the battery's charged. You can also test the full system by pulling the breakaway pin to make sure the actuator fires immediately. It's a simple way to confirm everything's ready before you tow. Specs Application: single-, tandem-, and triple-axle trailers Compatibility: Deutsche Hydrapro Alpha G1000 and G1600 Required by DOT for most trailers with EOH systems Battery: Type: 12V sealed AGM deep-cycle battery Capacity: 10 amp-hours Recharge method: 12V tow vehicle circuit Breakaway Switch: 2-wire normally open circuit Activates actuator when pin is pulled Construction: Battery case: injection-molded plastic Switch housing: molded polymer with stainless steel hardware Leads: 16-gauge color-coded wiring Kit Contents: 10 Ah AGM battery Breakaway switch with pin 2-amp charging circuit LED battery tester Installation Notes: Mount the battery box on the trailer frame and connect the yellow wire to the actuator's breakaway circuit.
This breakaway kit brings your trailer to a safe stop by applying the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges battery (sold separately) while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Cable detaches from switch to apply the brakes Requires 12V, 5-amp-hour battery (3801250 - sold separately) Built-in charger automatically charges battery while connected to tow vehicle Battery box attaches to trailer in either a side-load or top-load configuration Includes convenient wiring diagram Durable, plastic case protects the battery (sold separately) from the elements Rubber O-ring seal keeps out moisture Switch and battery box install on trailer frame - drilling required Hardware not included Kit includes breakaway switch, 0.5-amp charger, battery box, and wiring Specs: Application: one-axle or two-axle trailers with electric braking systems Charger amperage: 0.5 amps Breakaway cable: 4' long
Before you tow, press the test button to confirm the breakaway battery is ready. The built-in charger keeps it charged while connected to the tow vehicle, so the kit is ready if separation happens.Specs Breakaway Kit: Kit type: top-load breakaway kit Breakaway cable length: 4' Charger amperage: 1 amp Included components: breakaway switch, charger, battery, battery box, wiring, wire loom Battery: Voltage: 12V Type: lead-acid Capacity: 5 amp-hours Battery Box: Dimensions: 3-3/4" long x 6" wide x 5" tall Material: plastic Lid seal: rubber O-ring Drainage: bottom drain holes Lock compatibility: padlock compatible, padlock sold separately TowTether Safety Cable: Quantity: 1 cable Material: braided stainless steel Working load limit: 150 lbs Length: 19" Thickness: 3/32" Brake system compatibility: electric or hydraulic Compliance: FMCSA 393.43 compliant for trailer breakaway systems
Use this trailer breakaway kit with your Dexter BrakeRite EHB or BrakeRite II electric-over-hydraulic actuator to bring your trailer to a stop should it become disconnected from your tow vehicle. ... A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
The battery case in this breakaway kit clamps onto your trailer's frame or jack post and includes a trickle charger. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected from your tow vehicle.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Clamps around your trailer's frame or jack post Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, charger, battery box, breakaway switch, wiring, installation hardware, and breakaway cable Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 46-1/2" Charger lead wire length: 17" Battery box dimensions: 5" long x 4" wide x 3-1/4" tall Trailer jack mounting hole diameter: 2-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
The battery case in this breakaway kit can clamp around your trailer frame or jack post. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Clamps around your trailer's frame or jack post Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, battery box, breakaway switch, wiring, installation hardware, and breakaway cable Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 44" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 16-1/2" Battery box dimensions: 5" long x 3-1/4" wide x 3-7/8" tall Trailer jack mounting hold diameter: 3" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
If you can't find a spot to mount your battery box on your trailer, this weld-on plate can give you one. Includes hardware that's spaced for your Hopkins Engager top-load breakaway kit. ... Features: Lets you easily install your Hopkins Engager top-load breakaway kit (20400) on your trailer frame or jack Gives you a surface to mount your battery box to when you don't have room otherwise Welds on so you don't have to drill into your trailer's frame Includes hardware perfectly spaced for your box - no stressing over lining up mounting holes Specs: Dimensions: 9-3/8" long x 5" wide x 1/16" thick Mounting bolt spacing: 7" From center of hole to center of hole horizontally 1-1/2" From center of hole to center of hole vertically Limited 90-day warranty
If you can't find a spot to mount your battery box on your trailer, this weld-on plate can give you one. Includes hardware that's spaced for your Hopkins Engager side-loading breakaway kit. the kit installs easily once the plate is welded on.Features: Lets you easily install your Hopkins Engager side-load breakaway kit (20099) on your trailer frame or jack Gives you a surface to mount your battery to when you don't have room otherwise Welds on so you don't have to drill into your trailer's frame Includes hardware perfectly spaced for your box - no stressing over lining up mounting holes Specs: Dimensions: 7" long x 4-1/2" wide x 1/16" thick Mounting bolt spacing: 1-1/2" From center of hole to center of hole horizontally 7/8" From center of hole to center of hole vertically Limited 90-day warranty Breakaway kits are a safety system to protect your trailer in the event it becomes disconnected.
Filters
