Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…
view full answer...Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!
view full answer...I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…
view full answer...Hi David; nope, the leaf springs don't need to be changed if going to the AllTrek 4000 equalizers. You just need to choose the right one based on your wheelbase (measured center-to-center of your wheels): - 33" Wheelbase: MORryde AllTrek…
view full answer...Choosing the MORryde AllTrek 4000 #MR89DR comes with more requirements than simply matching up the size. At about 5-1/2" you should stick with the Equa-Flex #LC279687 from before or the Dexter #K71-652-00 which you can see installed on my…
view full answer...Hey Chad this is a great question. So the MORryde ALLTREK part #MR89DR does offer additional vertical suspension but it does sit a little taller than the equalizers it replaces so you wouldn't have to worry about your tires hitting fenders or…
view full answer...Hi Bobby, Yep, you got it right; to replace the 3-1/8" shackle straps you currently have, use the MORryde kit with the same 3-1/8" shackle size: - MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps…
view full answer...The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…
view full answer...I will be happy to help you out. The separate brake light circuit is going to have to be combined with the turn signals in order to use a light kit with a 4-Pole connector. There is a special converter for this, #RM-732. On the input side you will…
view full answer...To determine the correct replacement equalizers, bushing, wet bolts, shackles straps, etc. you'll need to do a bit of measuring first. The manufacturer designed the suspension to sit in a specific way so that it can roll back and forth so…
view full answer...Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
view full answer...The Dexter D35 axle is a 3,500 lb trailer axle so for a bearing kit you would want the part #BK2-100 that you referenced.
view full answer...Filter Your Search
Contact and Help