Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Then mount the posts on the top or below the trailer frame, as close to the rear corners as possible. Adjust the posts so that the distance between each post and your boat is less than 1".
Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).Features: Bunk-board kit lets you create 2 guide-ons to support your boat and keep it centered while you're loading it onto your trailer 2x4 Lumber for bunk boards not included 90-Degree-angled tubes let you mount the bunks close to your boat Great for narrow boats Bolt-on installation - clamp onto top or bottom of your trailer's frame Pre-galvanized steel construction is sturdy and corrosion-resistant Marine-grade carpeting lines bunk boards to protect your boat's finish 2 Rolls included to cover 2 boards U-bolts, brackets, and mounting hardware included Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/2" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) are required to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Carpeting dimensions (per roll): 11" wide x 12' long Maximum 2x4 length for carpeting: 69" Pre-Galvanized Steel Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.
Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between them correctly matches the width of your boat.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Then mount the posts on the top or below the trailer frame, as close to the rear corners as possible. Adjust the posts so that the distance between each post and your boat is less than 1".
These guide-on posts make it easy to load your pontoon boat onto your trailer. They attach to the rear of your trailer and extend out of the water, providing a visual target to center the boat's pontoons around. ... The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They clamp to the rear of your I-beam trailer frame and extend out of the water, providing visual targets to center the boat between during loading.The PVC posts also provide a visual aid to help you back your boattrailer down the ramp when you're unloading and loading your boat. Installation The posts are simple to install.
Aluminum guide-on posts keep your trailer in view when reversing down a boat ramp. Posts also provide markers so you keep your boat centered when loading or unloading it. ... The PVC posts also provide a visual aid to help you back your boattrailer down the ramp when you're unloading your boat. Installation To install the guide-ons, slide the PVC posts over the aluminum support posts.
These guide-on posts help you confidently load your boat onto your trailer and back your trailer down the ramp, tilting up to 70 degrees to accomodate your boat's wider hull. ... Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Assists you in backing your trailer down the boat ramp 70-Degree tilt accomodates your boat's wider hull 16-Gauge, pre-galvanized steel posts are strong and durable White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC pipe diameter: 2-3/8" Bend angle: 70 degrees Quantity: 2 boat guide-ons
Guide-on posts keep your trailer in view when reversing down a boat ramp. Posts also provide markers on your trailer so you keep your boat centered when loading or unloading it. ... The PVC pipes also provide a visual aid to help you back your boattrailer down the ramp when you're unloading your boat. Installation The posts are simple to install. Slide the PVC pipes over the pre-galvanized steel support posts.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach with U-bolts to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.The PVC posts also provide a visual aid to help you back your boattrailer down the ramp when you're unloading and loading your boat. Installation The posts are simple to install.
These guide-on posts help you confidently load your boat onto your trailer and back your trailer down the ramp, tilting up to 70 degrees to accomodate your boat's wider hull. ... Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Assists you in backing your trailer down the boat ramp 70-Degree tilt accomodates your boat's wider hull 16-Gauge, pre-galvanized steel posts are strong and durable Black PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC pipe diameter: 2-3/8" Bend angle: 70 degrees Quantity: 2 boat guide-ons
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Then mount the posts on the top or below the trailer frame, as close to the rear corners as possible. Adjust the posts so that the distance between each post and your boat is less than 1".
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Then mount the posts on the top or below the trailer frame, as close to the rear corners as possible. Adjust the posts so that the distance between each post and your boat is less than 1".
Galvanized steel guide-on posts keep your trailer in view when reversing down a boat ramp. Posts also provide markers on your trailer so you keep your boat centered when loading or unloading it. ... The PVC posts also provide a visual aid to help you back your boattrailer down the ramp when you're unloading your boat. Installation The posts are simple to install.
Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between them correctly matches the width of your boat.
... Fits trailer frames up to 3" wide x 4-1/4" tall. Hardware included.The galvanized steel support posts mount on top of the crossmember on your pontoon boattrailer's frame. Just slide the posts into the mounting brackets and secure the posts so that the distance between each bunk and pontoon is approximately 2" to 3".
Easily load your pontoon boat with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with endcaps. They fit trailer frames up to 3" wide x 4-1/4" tall. ... The galvanized steel support posts mount on top of the crossmember on your pontoon boattrailer's frame. Just slide the posts into the mounting brackets and secure the posts so that the distance between each bunk and pontoon is approximately 2" to 3".
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. ... The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the rollers correctly matches the width of your boat.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
... Adjustable posts give you up to 37" of added height.Remove the bunk from your existing guide-on - the rest of the guide-on can remain on your boattrailer Slide the PVC pipe onto the top of the steel upright Slide the assembled post extension into the opening of the guide-on After you've slid the post into the opening, you'll need to choose how tall you want your guideposts.
This winch stand mounts to your boattrailer tongue and lets you adjust its position up to 48" for smooth loading and launching. The heavy-duty 3" x 4" post features a 45-degree angled design and a corrosion-resistant finish.Features: Adjustable winch stand assembly for mounting a winch Heavy-duty 3" x 4" upright post provides strong support Compatible with many 2,000 lb to 3,500 lb trailer winches, including DL2000A, DL2500A, DL3200A, T2605S, T2605, T2000S, T3205, WINCH 2500, and WINCH 3500 45-degree angled design helps align the winch with the bow stop and boat eye Adjustable height up to 48" for proper winch positioning Corrosion-resistant, hot-dipped galvanized finish for marine and utility trailer use Specs: Application: Boattrailer winch stand Post dimensions: 3" x 4" Maximum height: 48" Angle: 45 degrees Finish: Hot-dipped galvanized Quantity: 1 winch stand assembly
Zinc-plated steel U-bolt kit allows you to attach roller-, bunk-, or post-style guide-ons to your boattrailer with a frame up to 3" wide x 5-1/4" tall. Includes 2 sets of mounting U-bolts.Features: Extra-long U-bolts secures a bunk-style, roller-style or post-style guide-on to your boattrailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware is sold separately (8) 3/8"-16 Lock nuts (8) 3/8" Washers Includes 2 sets of mounting U-bolts Made in the USA Specs: Fits: trailer frames up to 3" wide x 5-1/4" tall Length: 6" Length of threads: 2-3/8" Bolt diameter: 3/8" Quantity: 2 sets (4 U-bolts)
Zinc-plated steel U-bolt kit allows you to attach 1 roller-, bunk-, or post-style guide-on to your boattrailer with a frame up to 3" wide x 4" tall. Includes 1 pair of mounting U-bolts and required mounting hardware.Features: Extra-long U-bolts secure 1 bunk-style, roller-style or post-style guide-on to your boattrailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware included Made in the USA Specs: Fits: trailer frames up to 3" wide x 4" tall Inside dimensions: 5" long x 3-1/2" wide Bolt diameter: 3/8" Quantity: 1 set (2 U-bolts) Included mounting hardware: (4) 3/8"-16 Lock nuts (4) 3/8" Washers
Filters
