Bright and stylish, this X-shaped LED light will be easy for other drivers to spot as both a backup and tail light on your truck or trailer. Mounts in a cutout using a grommet (sold separately) and works with 3-prong plugs.Features: Oval reverse/tail light for trailers and trucks Certified for use as a backup light if installed as a pair X-shape design makes for a sleek, eye-catching look Red X glows for tail light Surrounding white LEDs light up for reverse Waterproof - great for boattrailers Red and white LEDs with clear lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting requires grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with standard 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 requirements Specs: Overall dimensions (including plug): 6-1/2" long x 2-3/8" tall x 1-3/4" thick Compatible with 12V DC systems Diodes: 12 Power draw 12.8 volts: 0.381 amps Lifetime limited warranty on LEDs What Wiring Do I Need?
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. ... Features: 2-Sided clearance light installs on your trailer fender Amber light faces front of trailer Red light faces rear of trailerReversible assembly can be installed on either driver's-side or passenger's-side fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lenses with red and amber LEDs Chrome-plated ABS plastic trim snaps on for a finished look Mounts on surface of trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 1-5/8" long x 13/16" tall x 1-1/4" wide Distance between mounting holes (center to center): 1-1/4" Diodes: 2 Power draw at 12.8 volts: 0.04 amps Quantity: 1 fender clearance/marker light Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
7-1/2" x 3-3/8" 4-Function, waterproof light acts as brake, tail, turn, and backup light. TecNiq red and clear lens creates a solid panel of light. Mounts to trailer surface with built-in flange (hardware not included). 2-Wire pigtail.Features: Oval trailer tail light serves 4 functions Turn signal light Tail light Brake light Backup light Red and clear lens creates a solid light pattern with a smooth appearance Sealed, waterproof unit includes durable, polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lens over red and white LEDs Surface-mount installation - hardware not included 4-Wire pigtail White wire for ground Yellow wire for reverse Red wire for stop/turn Black wire for tail Meets or exceeds FMVSS 108 standards Specs: Quantity: 1 tail light Dimensions: 7-1/2" long x 3-3/8" tall x 1-5/8" deep Mounting hole spacing: 7" horizontal x 2-3/4" vertical Diodes: 8 Power draw between 9 volts to 14 volts: Tail light: 0.11 amps to 0.13 amps Turn/backup light: 0.24 amps to 0.30 amps Lifetime warranty on LEDs
7-9/16" x 3-5/16" Oval. Waterproof trailer utility light provides bright white light where needed. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
6-1/2" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
7-1/2" x 3-5/16". Waterproof, 2-function trailer tail light acts as tail and reverselight. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.The light accepts a 3-prong plug (sold separately). Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
6-1/2" x 2-3/8" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A70GB) sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
6-7/16" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... Features: Oval backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights is installed (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Accepts industry-standard 2-prong plug (sold separately) DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Dimensions: 6-7/16" long x 2-1/4" wide x 1-3/4" deep Diodes: 10 Power draw at 12.8 volts: 0.26 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
4-1/4" Round. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... Features: Round backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights is installed (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible GloLight Series features a brighter outer ring of light with a smooth appearance LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Light fits into a 4-1/2" diameter hole Accepts industry-standard 2-prong plug (sold separately) DOT compliant Meets FMVSS 108 requirements Specs: Dimensions: 4-1/4" diameter x 2-3/16" deep Diodes: 21 Power draw at 12.8 volts: 0.425 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
One light does it all. This 4" round grommet lamp drops into standard holes to handle stop, turn, tail, and reverse. Sealed, UV tough, and low draw, it keeps your trailer visible and compliant from campsite to jobsite.Features: Combination Stop/Turn/Tail and Reverse LED in a 4" round package Grommet mount fits standard 4" round applications Grommet (TN43TR) is sold separately Low current draw: high-intensity stop/turn uses ~0.13 A at 12 VDC; reverse adds 0.3 A TecSeal urethane potting protects the circuit board UV-resistant, automotive-grade polycarbonate lens IP68 rated - dustproof and waterproof with hermetic seal Meets FMVSS 108 requirements for wide and narrow vehicles Reliable performance rated over 100,000 hours Wire colors: White - Ground, Red - Stop/Turn, Black - Reverse Specs: Dimensions (grommet mount): 4-5/16" diameter x 1-5/8" depth LEDs: 8 red / 2 white Voltage: 9-14 VDC Current - Stop/Turn (red): 0.11 A to 0.15 A Current - Reverse (white): 0.3 A Connector: Tri-Pole Mounting: Grommet; fits standard mounting holes Ingress rating: IP68 Compliance: FMVSS 108 Construction: TecSeal urethane potting; UV-resistant polycarbonate Service life: rated over 100,000 hours Lifetime warranty TecNiq has designed this high visibility stop, tail, turn, and reverselight to ensure you are seen in all conditions and at great distances.
10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 4-Wire pigtail. 14 Diodes.These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 5-Wire pigtail. 14 Diodes.These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
6-7/16" x 2-5/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Recessed mount with grommet (sold separately). Accepts 2-prong plug for backup and 3-prong plug for tail light. 16 Diodes.These lights will extend into the mounting surface and require that a hole be cut into your trailer.
4-5/16" Round. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens set inside clear lens. Recessed mount with grommet (sold separately). ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
6-7/16" x 2-5/16" Oval. Waterproof light serves 4 functions: stop, turn, tail, and backup light. Recessed mount with grommet (sold separately). Accepts 2-prong plug for backup and 3-prong plug for tail light. 16 Diodes.These lights will extend into the mounting surface and require that a hole be cut into your trailer.
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.Features: Oval trailer tail light serves 4 functions Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Mounts on surface of trailer with built-in black flange - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light Black wire for tail light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Overall dimensions: 7-1/2" wide x 3-1/4" tall x 3/4" deep Light face dimensions: 6-1/2" wide x 2-1/4" tall Wire length: 8" Diodes: 16 Power draw at 12.8 volts: Stop/turn light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
7-1/2" x 3-1/4" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing. ... Features: Oval backup light for trailers and utility trucks Certified for backup light function when installed as a pair in a 2-lamp system (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Recessed mount with built-in flange Accepts industry-standard, 2-prong plug (A45CB or A49PB - sold separately) DOT compliant Meets FMVSS (2) R requirements Specs: Overall dimensions: 7-1/2" long x 3-1/4" tall x 1-1/8" deep Light face dimensions: 6-1/2" long x 2-1/4" tall x 1" deep Diodes: 6 Power draw at 12.8V: 0.260 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
5-5/16" x 3-7/16" Rectangle. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
4-5/16" Diameter round. Waterproof, LED trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. ... Features: Round backup light for trailers and utility trucks Certified for backup light function when installed as a pair in a 2-lamp system (second light sold separately) High diode count creates a strong light pattern Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Recessed mount with grommet (A45GB - sold separately) Accepts industry-standard, 2-prong plug (A49PB or A45CB - sold separately) DOT compliant Meets FMVSS 108 requirements in any 360-degree position Specs: Dimensions: 4-5/16" diameter x 2" deep Diodes: 36 Power draw at 12.8V: 0.145 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
6-1/2" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. ... Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A70GB) sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
6-1/2" Oval. Waterproof trailerlight is certified for backup light function in a 2-lamp system. ONE Series provides bright light using fewer diodes than other LEDs. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Recessed-Mount Light Recessed-mount trailerlights install underneath a housing or a grommet (A70GB) sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
From docking lights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 11 LEDs Guaranteed circuit board protection Durable impact resistant lens Exceeds FMVSS 108 standards, IP68 rated for dust and water proofing Multiple mounting positions Wire functions: Yellow: reverse Red: stop/turn Black: running lights White: ground Specs: Measurements: 15-1/2" long; 1-1/4" tall, 1/2" deep LEDs: 3 Color: Clear lens Voltage: 9 to 14 volts DC Mounting: Surface mounted using (2) screws (screws not included - screw caps included) Connector: 9" wire Lifetime warranty TecNiq packs wide angle and bright illumination for maximum safety while retaining a sleek design.
Filters
